Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles
All-machined steel shroud and lever upgrades the Remington 700 action to a three-position safety. Lets you use match grade triggers that lack a safety. Provides bolt locked, bolt open and fire positions with positive detents. No tools needed to field strip for cleaning, service. Available polished blued. Requires gunsmith installation.
Côté Style Swing à la mise à niveau usine pistolets ou fusils Custom Build
Levier carénage en acier usinées avec toutes les mises à niveau et l'action Remington 700 à une sécurité à trois positions. Vous permet d'utiliser des déclencheurs de grade de correspondance qui n'ont pas une sécurité. Fournit le boulon verrouillé, boulon ouvert et le feu des positions avec des crans d'arrêt positifs. Aucun outil nécessaire pour la bande de terrain pour le nettoyage, service. Disponible poli bleui. Nécessite l'installation de l'armurier.
SPECS : sécurité - 4140 acier, poli bleu (PB). Env. 2"(5cm) OAL, en poids 2,5 oz (71g) correspond à la Remington 700/7/721/722/600/660/XP-100. Droit - (RH).
Plus...
Évaluations client de GENTRY CUSTOM RIGHT HAND BLUE SAFETY ONLY
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 3.4
Last resort(16.11.2009)
I spent many days trying to get this product to work. I also "lost my shirt" with the labor charged to the customer for fitting this part. The safety lever retainer is a very small socket head screw and the threads of this screw will wear with minimal usage of engaging and disengaging the safety, and then the safety becomes very difficult to engage.
Very good product, true safety(18.02.2011)
I have installed half a dozen of these on Remington 700's and Mauser 98's. It is only a job for the experienced machinist. Set up, equipment, tooling and technique are critical. This is not a drop in. Figure 3 hours machine/fitting work. When done correctly, the safety does the job - it disconnects the firing pin from the trigger sear, and it blocks the firing pin from forward movement - like a Model 70 safety. Gentry is a good outfit to work with - full support, nice people.
A pain to fit, but indespensable(21.04.2015)
This is an excellent, one of a kind product. It gives Remington 700 owners a true 3 position safety that locks the firing pin and not just the sear. And it also gives you the ability to pull the firing pin and shroud assembly in the field for cleaning or whatever with no tools. All my Remingtons have this mod. True- it is a pain to fit, and you are likely to need a couple spare cocking pieces to screw up on before you get the hang of fitting it. Tip- when you cut the right hand side of the cocking piece to fit the safety lever, cut the contact surface at a 45 degree angle. Tip 2- when drilling the hole for the bolt locking pin, mark the location with a dab of inletting black on the face of the pin. When you get it right, this is a very handy addition to any Rem 700.
Good Product BUT----(27.11.2017)
Safety works very well - HOWEVER, be very careful when disassembling the bolt for cleaning. If you use one of the firing pin retraction tools to pull back the pin, the safety assembly can turn a slight amount clockwise. This will immediately lock the safety assembly to the bolt. Efforts to unlock the safety assembly from the bolt will destroy the safety. Bottom line - the only safe way to disassemble the safety from the bolt body is to use the middle position and unscrew the unit.
Works on Stoll Kodiak(11.12.2017)
I had one of these installed on a Stolle Kodiak action by Bruce Thom of BAT machine, way back when he was just a wee tool and die maker at Key tropic corp. It is functioning perfectly to this day, even though I gave the rifle to my buddy's son for his graduation present. This rifle has been wet, dirty, cold, etc as it is used to kill varmints. Excellent product, if you have a top notch gunsmith to install it.
Référence: 339000001 GENTRY CUSTOM RIGHT HAND BLUE SAFETY ONLY Ref Fabricant: NONE Levier carénage en acier usinées avec toutes les mises à niveau et l'action Remington 700 à une sécurité à trois positions. Vous permet d'utiliser des déclencheurs de grade de correspondance qui n'ont pas une sécurité. Fournit le boulon verrouillé, boulon ouvert et le feu des positions avec des crans d'arrêt positifs. Aucun outil nécessaire pour la bande de terrain pour le nettoyage, service. Disponible poli bleui. Nécessite l'installation de l'armurier.
229.9CHF7CHF 229.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles
All-machined steel shroud and lever upgrades the Remington 700 action to a three-position safety. Lets you use match grade triggers that lack a safety. Provides bolt locked, bolt open and fire positions with positive detents. No tools needed to field strip for cleaning, service. Available polished blued. Requires gunsmith installation.
Côté Style Swing à la mise à niveau usine pistolets ou fusils Custom Build
Levier carénage en acier usinées avec toutes les mises à niveau et l'action Remington 700 à une sécurité à trois positions. Vous permet d'utiliser des déclencheurs de grade de correspondance qui n'ont pas une sécurité. Fournit le boulon verrouillé, boulon ouvert et le feu des positions avec des crans d'arrêt positifs. Aucun outil nécessaire pour la bande de terrain pour le nettoyage, service. Disponible poli bleui. Nécessite l'installation de l'armurier.
SPECS : sécurité - 4140 acier, poli bleu (PB). Env. 2"(5cm) OAL, en poids 2,5 oz (71g) correspond à la Remington 700/7/721/722/600/660/XP-100. Droit - (RH).
Plus...
Évaluations client de GENTRY CUSTOM RIGHT HAND BLUE SAFETY ONLY
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 3.4
Last resort(16.11.2009)
I spent many days trying to get this product to work. I also "lost my shirt" with the labor charged to the customer for fitting this part. The safety lever retainer is a very small socket head screw and the threads of this screw will wear with minimal usage of engaging and disengaging the safety, and then the safety becomes very difficult to engage.
Very good product, true safety(18.02.2011)
I have installed half a dozen of these on Remington 700's and Mauser 98's. It is only a job for the experienced machinist. Set up, equipment, tooling and technique are critical. This is not a drop in. Figure 3 hours machine/fitting work. When done correctly, the safety does the job - it disconnects the firing pin from the trigger sear, and it blocks the firing pin from forward movement - like a Model 70 safety. Gentry is a good outfit to work with - full support, nice people.
A pain to fit, but indespensable(21.04.2015)
This is an excellent, one of a kind product. It gives Remington 700 owners a true 3 position safety that locks the firing pin and not just the sear. And it also gives you the ability to pull the firing pin and shroud assembly in the field for cleaning or whatever with no tools. All my Remingtons have this mod. True- it is a pain to fit, and you are likely to need a couple spare cocking pieces to screw up on before you get the hang of fitting it. Tip- when you cut the right hand side of the cocking piece to fit the safety lever, cut the contact surface at a 45 degree angle. Tip 2- when drilling the hole for the bolt locking pin, mark the location with a dab of inletting black on the face of the pin. When you get it right, this is a very handy addition to any Rem 700.
Good Product BUT----(27.11.2017)
Safety works very well - HOWEVER, be very careful when disassembling the bolt for cleaning. If you use one of the firing pin retraction tools to pull back the pin, the safety assembly can turn a slight amount clockwise. This will immediately lock the safety assembly to the bolt. Efforts to unlock the safety assembly from the bolt will destroy the safety. Bottom line - the only safe way to disassemble the safety from the bolt body is to use the middle position and unscrew the unit.
Works on Stoll Kodiak(11.12.2017)
I had one of these installed on a Stolle Kodiak action by Bruce Thom of BAT machine, way back when he was just a wee tool and die maker at Key tropic corp. It is functioning perfectly to this day, even though I gave the rifle to my buddy's son for his graduation present. This rifle has been wet, dirty, cold, etc as it is used to kill varmints. Excellent product, if you have a top notch gunsmith to install it.