Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz
100004369
For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

99.9 99.9 1 CHF
Artikel-Nr.: 100004369
10-8 PERFORMANCE ARMORER'S BLOCK
Herstellerproduktnummer: BLOCK Handlicher Bankblock aus superstabilem, glasfaserverstärktem Nylon für die Pistolenkomponenten von 1911, damit Sie eine Vielzahl von Reparatur-, Montage- / Demontage- und Genauigkeitsaufgaben schnell und einfach ausführen können. Hält den Rahmen sicher auf der Seite, sodass Sie daran arbeiten können, ohne das Finish zu beschädigen. Hilft bei der Überprüfung des Hammer- / Stollen-Eingriffs, beim Entfernen des Hammerstrebenbolzens, beim Entfernen des Federgehäuses und beim Halten der Daumensicherung, um die Stollen-Eingriffsfläche für den Stollenstopp leicht abzulegen. Spannen Sie den Abzieher vom Objektträger, damit Sie nicht das Risiko eingehen, den Objektträger zu zerkratzen, und halten Sie den Abzieher beim Feilen und Honen der Klaue. Hält den Lauf beim Entfernen des Verbindungsstifts mit Sacklöchern, damit die Stifte nicht verloren gehen. Sie können den Rahmen sogar zwischen zwei Blöcke legen und in einen Schraubstock einspannen, um ihn zu verschieben.
99.9 CHF 11 CHF 99.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Hersteller/Modell: 1911 Modell: Government, Commander, Officers

Eigenschaften

Hersteller/Modell: 1911 Modell: Commander,Government,Officers Versandgewicht: 0.363kg Versandhöhe: 38mm Versandbreite: 122mm Versandlänge: 107mm

Artikeldetails

Made in USA



For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

Newsletter