Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
100004369
For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

99.9 99.9 1 CHF
Référence: 100004369
10-8 PERFORMANCE ARMORER'S BLOCK
Ref Fabricant: BLOCK Bloc pratique banc de supports en nylon ultra robuste, renforcé de verre 1911 pistolet composants usinés pour vous pouvez d'effectuer une variété de tâches accurizing, montage/démontage et réparation rapidement et facilement. Range en toute sécurité le châssis sur le côté, ainsi vous pouvez travailler dessus sans risque d'endommager le fini. Vous aide à Vérifiez l'engagement de marteau/sear, enlevez la goupille de contrefiche de marteau, retirez le logement de ressort principal et détient sécurité pouce simple dépôt d'arrêt brûleur surface de fiançailles stud. Utiliser pour tendre l'extracteur hors de la diapositive, alors vous ne risquer de rayer la diapositive et conserver l'extracteur tout dépôt et rodage de la griffe. Maintient le Canon au moment du retrait de broche de lien, avec des trous borgnes à attraper les broches alors qu'ils ne se perdent. Vous pouvez même placer le cadre entre les deux blocs et serrer dans un étau d'établi pour le montage de diapositives.
99.9 CHF 0 CHF 99.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: 1911 Modèle: Government, Commander, Officers

Caractéristiques

Manufacture: 1911 Modèle: Commander,Government,Officers Poids du colis: 0.363kg Hauteur d'expédition: 38mm Largeur d'expédition: 122mm Longueur d'expédition: 107mm

Détails de l'article

Fabriqué au USA



For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

Newsletter