Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
100004369
For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

99.9 99.9 1 CHF
N. prodotto: 100004369
10-8 PERFORMANCE ARMORER'S BLOCK
Parti Fabbricante: BLOCK Blocco banco maneggevole lavorati da supporti in nylon super-resistente, rinforzato con vetro 1911 pistola componenti così si può eseguire una serie di riparazione, montaggio/smontaggio e compiti accurizing rapidamente e facilmente. Detiene saldamente il telaio su un fianco, quindi si può lavorare su di esso senza rischio di danneggiare la finitura. Consente di controllare martello/sear fidanzamento, rimuovere il perno di puntone martello, rimuovere l'alloggiamento della molla principale e tiene il pollice sicurezza per facile deposito della superficie di fidanzamento stud fermata scottare. Utilizzare per tendere l'estrattore fuori la diapositiva, quindi non rischiare di graffiare la diapositiva e mantenere l'estrattore durante la limatura e affinando l'artiglio. Tiene la canna durante la rimozione del perno di collegamento, con fori ciechi per catturare i perni in modo non perdersi. Potete anche posizionare il telaio tra i due blocchi e serrarlo in una morsa a banco per montaggio di diapositive.
99.9 CHF 0 CHF 99.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: 1911 Modello: Government, Commander, Officers

Caratteristiche

Adatto per: 1911 Modello: Commander,Government,Officers Peso della spedizione: 0.363kg Altezza di spedizione: 38mm Larghezza di spedizione: 122mm Lunghezza di spedizione: 107mm

Dettagli dell'elemento

Made in Usa



For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

Newsletter