Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

10-8 PERFORMANCE
1911 EXTENDED MAGAZINE RELEASE

100003706

Fast, Positive Release Without Extra Bulk

Drop-in replacement for factory magazine catch has a unique, convex button surface to ensure positive finger contact for fast magazine changes under pressure. Crisp, 30 lpi serrations further aid in fumble-free engagement; .045" longer than factory part for extra leverage without creating an unwanted protrusion that snags on clothing, holster, or other gear. Tumbled and bead-blasted for a uniform, matte finish with rounded “dehorned” edges. Interior of the catch is relieved to enable instant magazine free-fall when you hit the button. Available in Carbon Steel with black manganese phosphate finish.

SPECS: Carbon steel black matte finish. Gunsmith fitting may be required.

Plus...

Libération rapide et Positive sans volume supplémentaire

Remplacement pour arrêtoir usine a une superficie de bouton unique, convexe pour assurer un contact positif de doigt pour des changements rapides magazines sous pression. 30 lpi dentelures plus croquante, aide fumble-libre engagement;. 045" plus longue que la partie d'usine pour la puissance supplémentaire sans créer une saillie non désirée qui accroche sur l'habillement, étui ou autres engins. Chuté et perle-soufflé pour un uniforme, fini mat avec bords arrondis de dehorned. Intérieur des prises est relevée pour permettre la chute magazine instantanée lorsque vous cliquez sur le bouton. Disponible en acier au carbone avec finition de phosphate de manganèse noir ou naturelle finition inox.

Spécifications : acier au carbone, noir ou acier inoxydable, argent naturel, les deux fini mat. Armurier raccord peut être nécessaire.

Plus...

Évaluations client de 10-8 PERFORMANCE MAGAZINE RELEASE, BLACK

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 3.6

High Quality, Nicely Finished (30.12.2009)

A well thought out design with clean serrations, without annoying casting lines typical in other brands. Slightly oversized which allows precise fitting regardless of tolerance stacks.

10-8 magazine catch (27.03.2010)

This does provide a very positive and quick release of the magazine. It is a strong machined part. The slanted contour and serrations provide a very positive tactile surface. Fitting was required to get flush with the frame and to allow proper travel. If you have to file you will need to touch up the blueing. Overall, I like it better than your standard, checkered and extended catch.

10-8 magazine catch (27.03.2010)

This part does release the magazine very quickly with minimal presure. The slanted serrated surface provides a very positive tactile surface. I do like it better than similar, extended and checkered magazine releases.

Almost 5 stars (08.01.2012)

Mine was slightly over molded and required some filing in order to release the magazine cleanly. Also, it does NOT include the retaining pin and spring.

Expected more out of this part..... (14.10.2009)

I love beveled mag releases. Usually I buy a mag release and then have to have it custom beveled and serrated by a gunsmith. So, naturally I was excited when 10-8 started offering these. That's about where the excitement ends. The fit and finish of these parts is really disappointing.

not good (22.06.2010)

way to small and loose fitting in my Springfield operator. also noticed it had a jagged protruding edge machined on the inside. i like the curved button, and the finish is good, but the machine quality and fit is extremely poor.

Hands down, a good quality part. (01.04.2011)

I don't understand the bad reviews on this particular item. The machine quality is very good. As for the part fitting loose in the frame, I put this release into a Kimber frame with a near perfect fit, so based on the brand of your pistol, your mileage may vary. You will have to fit this part. REMEMBER: This is not a must, but I strongly advise to polish the mag catch lock as well, this will prevent it from dragging in the catch itself, making your release much more smooth. Overall I am very satisfied with this product. 10-8 makes good quality parts.

Great design, well executed (06.11.2011)

This is a great design concept. 1911 owners need to remember that there is no such thing as a guaranteed drop in part in the world of the 1911. Sometimes you get lucky and other times you have to have a competent gunsmith or armored fit it. There are simply too many manufacturers and variables to account for. That said, this part was easy for me to fit up and works great in my builds.

Can't use (21.07.2015)

It's machined well, but was tearing up Wilson Combat mags. I rounded the edge as much as possible, but it seems like the mags are galling terribly with each insertion.

Good looking mag catch, fit perfectly but still ended up in the trash.

It needs fitting (16.01.2017)

I bought one of these to complete a parts build on an RIA. I needed to be fitted around both the button and the mag lock areas. Additionally the interior lock needed to be relieved as well to make dropping magazines easier. The bevel feels very nice and the extended length feels right in my hands and I can drop magazines without breaking my grip (I wear XL gloves and have a set of VZ grips with the super scoop). Overall it's a button gentlemen, it works but it'll require fitting in most dimensions.

Lire 10 plus d'avis sur brownells.com

59.9 59.9 1 CHF

Référence: 100003706
10-8 PERFORMANCE MAGAZINE RELEASE, BLACK
Ref Fabricant: MAGCATCHC Remplacement pour arrêtoir usine a une superficie de bouton unique, convexe pour assurer un contact positif de doigt pour des changements rapides magazines sous pression. 30 lpi dentelures plus croquante, aide fumble-libre engagement;. 045" plus longue que la partie d'usine pour la puissance supplémentaire sans créer une saillie non désirée qui accroche sur l'habillement, étui ou autres engins. Chuté et perle-soufflé pour un uniforme, fini mat avec bords arrondis de dehorned. Intérieur des prises est relevée pour permettre la chute magazine instantanée lorsque vous cliquez sur le bouton. Disponible en acier au carbone avec finition de phosphate de manganèse noir ou naturelle finition inox.

59.9 CHF 1 CHF 59.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Finition: Noir Manganese Phosphate Main: Droit Manufacture: 1911 Modèle: Government, Commander, Officers

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Finition: Noir Manganese Phosphate Main: Droit Manufacture: 1911 Modèle: Government,Commander,Officers Poids du colis: 0.091kg Hauteur d'expédition: 8mm Largeur d'expédition: 79mm Longueur d'expédition: 127mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Fast, Positive Release Without Extra Bulk

SPECS: Carbon steel black matte finish. Gunsmith fitting may be required.

Plus...

Libération rapide et Positive sans volume supplémentaire

Spécifications : acier au carbone, noir ou acier inoxydable, argent naturel, les deux fini mat. Armurier raccord peut être nécessaire.

Plus...

Évaluations client de 10-8 PERFORMANCE MAGAZINE RELEASE, BLACK

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 3.6

High Quality, Nicely Finished (30.12.2009)

A well thought out design with clean serrations, without annoying casting lines typical in other brands. Slightly oversized which allows precise fitting regardless of tolerance stacks.

10-8 magazine catch (27.03.2010)

Almost 5 stars (08.01.2012)

Mine was slightly over molded and required some filing in order to release the magazine cleanly. Also, it does NOT include the retaining pin and spring.

Expected more out of this part..... (14.10.2009)

not good (22.06.2010)

Hands down, a good quality part. (01.04.2011)

Great design, well executed (06.11.2011)

Can't use (21.07.2015)

It needs fitting (16.01.2017)

Lire 10 plus d'avis sur brownells.com

Poursuivre vos achats

ED BROWN ALLEN HEAD GRIP SCREWS BLUED QUANITY 4
1911 ALLEN HEAD GRIP SCREWS

ED BROWN

En stock

CHF 18.90 * CHF 18.90 - CHF 69.90*

Vis Poignée

4.2

WILSON COMBAT .38S/9MM SLIDE STOP, BLUE
1911 SLIDE STOP

WILSON COMBAT

En stock

CHF 49.90 * CHF 49.90 - CHF 54.90*

Fermoirs Chariot de Culasse

4.3

NIGHTHAWK CUSTOM 1911 HAMMER, BLUED
1911 HAMMER

NIGHTHAWK CUSTOM

En stock

CHF 94.90 *

Marteaux

4.8

NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT
1911 LIGHTWEIGHT TRIGGERS

NIGHTHAWK CUSTOM

En stock

CHF 44.90 * CHF 34.38 - CHF 45.90*

Détentes

4.8

TANGODOWN VICKERS TACTICAL EXT MAG RELEASE, GLOCK® MODELS
VICKERS GLOCK® EXTENDED MAGAZINE RELEASE

TANGODOWN

En stock

CHF 34.90 * CHF 34.90 - CHF 38.90*

Verrous de chargeur

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.