CAD designed and built to aerospace specifications from chrome silicon or corrosion resistant stainless steel for maximum durability, consistency and reliable performance. Heat treated, shot peened and fully stress relieved to minimize spring set.
SPECS: Chrome silicon or stainless steel round wire.
Plus...
Conçu pour le Maximum de cohérence & fiabilité
CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
SPECS : silicon Chrome ou acier inoxydable fils ronds.
Plus...
Évaluations client de ISMI 18 LB. C/S RECOIL SPRING
Nombre d'évaluations: 10
De brownells.com: 9
Note moyenne: 3.5
Perfect(10.06.2020)
ISMI is the best!(31.10.2009)
ISMI Springs are my first and only choice of spring. They last forever.
GREAT VALUE(28.01.2014)
I used this 18 lb recoil spring in conjuction with the ISMI 17 lb mainspring in a High Standard 1911. This combo lightens the trigger and maintains safe, reliable function of the 1911.
these springs are horrible(30.05.2010)
weaker than the one i bought it to replace. sent it back for a refund, and bought wolff.
don't waste your money on these chrome silicon gimmicks.
Works Fine in several 1911's(23.02.2017)
I have used these several times for 1911 replacement springs.
Normally 16 lb. weight is the proper factory spring replacement.
Trust ISMI(31.10.2009)
I use ISMI exclusively in both Glocks and 1911. They last forever.
Absolutely(31.10.2009)
ISMI is my only choice. Period
Not for my 1911(14.12.2012)
Had heard good things (from USPSA/IPSC shooters mostly) about these, so decided to try one instead of the Wolff springs I normally use. Was a mistake: While the spring 'weight' tested correctly (12#) on my spring tester, I observed it became coil-bound before normal compressed length for a 5" 1911. Sure enough, it did the same thing when I installed it in the gun (a DW PM-9, 5" 9mm; std. recoil set up w/o any buffer). The spring became coil bound and did not allow full rearward slide movement. I tried to contact ISMI but never got any response. Not sure of other 'weight' ISMI springs are like this, but I will not purchase anymore of thiers (the Wolff ones work fine in this gun).
Spring will not let slide travel fully(29.03.2016)
My most useful comment is not to buy one of these. I had the same trouble as the other reviewer that the spring become spring bound before the slide can travel full length. This result in having to use slide release instead of "sling shot" release (pulling the slide back by hand and releasing) during magazine changes. I had this trouble with a Kimber 1911 target II .38 Super. Its the chance you take with after market products.
IMSI doesn't measure up.(01.07.2013)
The 11 pound spring measures 9 pounds on a spring tester. The rating on the package should be very close to the spring inside.
Référence: 445100018 ISMI 18 LB. C/S RECOIL SPRING Ref Fabricant: 18CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF80CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 18 lbsManufacture: 1911Modèle: Government
Livres (poids):
18 lbs
Manufacture:
1911
Modèle:
Government
Poids du colis: 0.014kgHauteur d'expédition: 10mmLargeur d'expédition: 69mmLongueur d'expédition: 185mm
Détails de l'article
Fabriqué au USA
Référence: 445000001 ISMI 11 LB. C/S SPRING Ref Fabricant: 11CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF23CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 11 lbsManufacture: 1911Modèle: Government
Référence: 445000002 ISMI 12.5 LB. C/S SPRING Ref Fabricant: 125CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF129CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 12.5 lbsManufacture: 1911Modèle: Government
Référence: 445003010 ISMI 10 LB. C/S RECOIL SPRING Ref Fabricant: 10CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF63CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 10 lbsManufacture: 1911Modèle: Government
Référence: 445003015 ISMI 15 LB. C/S RECOIL SPRING Ref Fabricant: 15CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF36CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 15 lbsManufacture: 1911Modèle: Government
Référence: 445100016 ISMI 16 LB. C/S RECOIL SPRING Ref Fabricant: 16CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF90CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 16 lbsManufacture: 1911Modèle: Government
Référence: 445100109 ISMI 9 LB. C/S RECOIL SPRING Ref Fabricant: 9CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF63CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 9 lbsManufacture: 1911Modèle: Government
Référence: 445100114 ISMI 14 LB. C/S RECOIL SPRING Ref Fabricant: 14CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF110CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 14 lbsManufacture: 1911Modèle: Government
Référence: 445100118 ISMI 18 LB. S/S RECOIL SPRING Ref Fabricant: 18SS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF4CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 18 lbsManufacture: 1911Modèle: Government
Référence: 445000015 ISMI 20 LB. C/S RECOIL SPRING Ref Fabricant: 20CS CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
15.9CHF3CHF 15.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Livres (poids): 20 lbsManufacture: 1911Modèle: Government
CAD designed and built to aerospace specifications from chrome silicon or corrosion resistant stainless steel for maximum durability, consistency and reliable performance. Heat treated, shot peened and fully stress relieved to minimize spring set.
SPECS: Chrome silicon or stainless steel round wire.
Plus...
Conçu pour le Maximum de cohérence & fiabilité
CAD conçu et construit aux spécifications de l'aérospatiales de chrome silicium ou résistant à la corrosion en acier inoxydable pour une durabilité maximale, de cohérence et de performances fiables. Traité thermiquement, tir matage et entièrement contrainte relevée afin de minimiser le ressort Malossi.
SPECS : silicon Chrome ou acier inoxydable fils ronds.
Plus...
Évaluations client de ISMI 18 LB. C/S RECOIL SPRING
Nombre d'évaluations: 10
De brownells.com: 9
Note moyenne: 3.5
Perfect(10.06.2020)
ISMI is the best!(31.10.2009)
ISMI Springs are my first and only choice of spring. They last forever.
GREAT VALUE(28.01.2014)
I used this 18 lb recoil spring in conjuction with the ISMI 17 lb mainspring in a High Standard 1911. This combo lightens the trigger and maintains safe, reliable function of the 1911.
these springs are horrible(30.05.2010)
weaker than the one i bought it to replace. sent it back for a refund, and bought wolff.
don't waste your money on these chrome silicon gimmicks.
Works Fine in several 1911's(23.02.2017)
I have used these several times for 1911 replacement springs.
Normally 16 lb. weight is the proper factory spring replacement.
Trust ISMI(31.10.2009)
I use ISMI exclusively in both Glocks and 1911. They last forever.
Absolutely(31.10.2009)
ISMI is my only choice. Period
Not for my 1911(14.12.2012)
Had heard good things (from USPSA/IPSC shooters mostly) about these, so decided to try one instead of the Wolff springs I normally use. Was a mistake: While the spring 'weight' tested correctly (12#) on my spring tester, I observed it became coil-bound before normal compressed length for a 5" 1911. Sure enough, it did the same thing when I installed it in the gun (a DW PM-9, 5" 9mm; std. recoil set up w/o any buffer). The spring became coil bound and did not allow full rearward slide movement. I tried to contact ISMI but never got any response. Not sure of other 'weight' ISMI springs are like this, but I will not purchase anymore of thiers (the Wolff ones work fine in this gun).
Spring will not let slide travel fully(29.03.2016)
My most useful comment is not to buy one of these. I had the same trouble as the other reviewer that the spring become spring bound before the slide can travel full length. This result in having to use slide release instead of "sling shot" release (pulling the slide back by hand and releasing) during magazine changes. I had this trouble with a Kimber 1911 target II .38 Super. Its the chance you take with after market products.
IMSI doesn't measure up.(01.07.2013)
The 11 pound spring measures 9 pounds on a spring tester. The rating on the package should be very close to the spring inside.