Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

10-8 PERFORMANCE
1911 NATIONAL MATCH U-NOTCH REAR SIGHT

100004375

Rugged Construction for Daily Carry, Plus A Clear, Easy-To-See Sight Picture

National Match style rear sight combines modern features with “retro” looks. Fits the dovetail of GI-pattern 1911 pistols, including current-production Colts—no milling required. Extra-thick blade is tall enough to work with Colt .175" high front sight or same-height aftermarket alternatives. Wide .140" notch aids in easy, fast acquisition of front sight for precise targeting. Ledge on front of blade aids in one-hand slide racking.

SPECS: Steel, matte black finish. .315” high, with .140” wide x .125” high notch. Fits dovetail for GI-pattern 1911 pistols, including current-production Colts with .175” high front sight.

Altro...

Robusta costruzione per portare ogni giorno, più una foto vista chiaro, facile da vedere

National Match stile tacca di mira combina caratteristiche moderne con un aspetto "retrò". Si adatta a coda di rondine delle pistole GI-modello 1911, compreso corrente-produzione Colts — nessuna fresatura necessaria. Spessa lama è abbastanza alto per lavorare con Colt. 175" alta vista frontale o alternative aftermarket della stessa altezza. Vasta. 140" aids tacca in facile, veloce acquisizione del mirino per il targeting preciso. Sporgenza sul fronte dell'aids lama in una mano scivolo travaso.

Specifiche: opaco, acciaio finitura di nero.. 315" alto, con. 140" largo x. 125" alto tacca. Si adatta a coda di rondine per pistole 1911 GI-modello, compreso i Colts corrente-produzione con. mirino a 175" elevate.

Altro...

Punteggi dei clienti per 10-8 PERFORMANCE NM U-NOTCH REAR SIGHT

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4.8

Sometimes simple is best (02.11.2009)

I put this sight on my colt commander, which is my off duty conceal 1911. I carry a Wilson CQB on duty with their "U notch" sight, so it was sweet to find this one (keeping a sight standard). The sight fit a little tight and needed some minor fitting (a nail file worked well) to fit the slide after the pistol was Duracoated. The anti -glare lines cut into the sight work just as intended. The sight mates up to the series 80 front sight or any comparable in height VERY well. It's very thick, so adding a tactical advantage if you had to rack the gun on a boot, table, duty belt, ext. When building a carry 1911, one which has to do its job, looks are not the best reason to chose a sight set, but on a side note, this sight does add a very nice "retro" appearance to the weapon.

Very pleased (24.03.2010)

Couldn't be happier. Fit with minimal filing. Great sight picture. Doesn't look out of place on a Mil-Spec gun.

this is the one (14.01.2011)

I own several 1911's, some came with slanted rear sights ... they look nice ... but I never understood their usefulness.

I bought this simply to raise my POI on an older Colt. It did that. But once I installed it, it was clear this sight was built for serious business.

The sight is perfect, as is, for defensive, or even action-oriented competition. But I'd like to also see a more bullseye-oriented sight, with a narrower notch, and flat bottom.

This sight was also a perfect fit in both my older Colt, and recent manufacture Colt. Nice and tight ... but not enough to bring out the 5 lbs sledge.

Worked well (04.03.2011)

Installed on series 80. Needed some flat filing but fits fine. Did find some rust that I touched up with cold blue.

An excellent product (01.04.2011)

Using this product on a 1911 Springfield LW Champion Commander-style.

Using it for my off-duty gun, the sight works really well.

The U-Notch allows for great visibility of the front sight.

Remington 1911 R1 Install (24.03.2015)

I bought this to install on a Remington 1911 R1 standard blue model, with standard GI-style dovetail rear sight (NOT the Carry or Enhanced model), as I did not care for the stock rear sight's square edges for carry, or the huge rear white dots for shooting. This replacement sight took quite a bit of filing to fit the Remington dovetail to even a very snug fit - if you are not knowledgeable, skilled nor have the correct files for the job, it's a gunsmith install on this firearm.

Having said that, I am a 1911 armorer and it took me about 45 minutes to fit the sight, and touch-up cold blue it. Fortunately the sight takes Brownells Oxpho-Blue Creme very well. The resulting sight picture with the stock front sight is very nice - no distracting huge white dots. The serrated rear face creates a no-glare presentation, and the rounded corners are nice for concealed carry of the 1911.

At the range, POI after drift windage adjustment was zero at 15 yards with a center hold, using 230 grain factory ammo.

All in all, a nice replacement for the Remington 1911 R1, but not a drop in.

Outstanding Value (08.02.2016)

Took all of 15 minutes to fit this to a Model 1927 Argentine 1911. A few passes with a stone and it tapped nicely into place. Nice quality of finish. Serrations very crisp and even. Classic looks. I wold recommend this to anyone.

Fits Colt 1991A1 (07.03.2018)

Colt 1991A1. Two layers masking tape on each side of slide. One paint stick each side of slide protects from vice jaw marks. Slide dovetail just above jaws of vice. Tighten vice firmly, but not crush it. Removed old sight driven from right to left, viewed from back of slide. Very slightly rounded right side edges of new sight to help it start into LEFT side of slide dovetail. Took a few times to align and start sight into dovetail, but then drove in smoothly with brass punch. Some firm hits at the end to center sight in slide. The dovetail had a punch mark put in by Colt, I left the mark there and drove the new sight over it. Color matches Colt. Looks good, have not shot it yet.

Leggi più recensioni su brownells.com

54.9 54.9 1 CHF

N. prodotto: 100004375
10-8 PERFORMANCE NM U-NOTCH REAR SIGHT
Parti Fabbricante: 01140 National Match stile tacca di mira combina caratteristiche moderne con un aspetto "retrò". Si adatta a coda di rondine delle pistole GI-modello 1911, compreso corrente-produzione Colts — nessuna fresatura necessaria. Spessa lama è abbastanza alto per lavorare con Colt. 175" alta vista frontale o alternative aftermarket della stessa altezza. Vasta. 140" aids tacca in facile, veloce acquisizione del mirino per il targeting preciso. Sporgenza sul fronte dell'aids lama in una mano scivolo travaso.

54.9 CHF 6 CHF 54.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: 1911 Colore delle mire: Black Modello: Government, Commander, Officers Tipo: U-Notch

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: 1911 Colore delle mire: Black Modello: Commander,Government,Officers Tipo: U-Notch Peso della spedizione: 0.005kg Larghezza di spedizione: 83mm Lunghezza di spedizione: 146mm

Dettagli dell'elemento

Made in Usa

Rugged Construction for Daily Carry, Plus A Clear, Easy-To-See Sight Picture

SPECS: Steel, matte black finish. .315” high, with .140” wide x .125” high notch. Fits dovetail for GI-pattern 1911 pistols, including current-production Colts with .175” high front sight.

Altro...

Robusta costruzione per portare ogni giorno, più una foto vista chiaro, facile da vedere

Altro...

Punteggi dei clienti per 10-8 PERFORMANCE NM U-NOTCH REAR SIGHT

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4.8

Sometimes simple is best (02.11.2009)

Very pleased (24.03.2010)

Couldn't be happier. Fit with minimal filing. Great sight picture. Doesn't look out of place on a Mil-Spec gun.

this is the one (14.01.2011)

Worked well (04.03.2011)

Installed on series 80. Needed some flat filing but fits fine. Did find some rust that I touched up with cold blue.

An excellent product (01.04.2011)

Using this product on a 1911 Springfield LW Champion Commander-style.

Using it for my off-duty gun, the sight works really well.

The U-Notch allows for great visibility of the front sight.

Remington 1911 R1 Install (24.03.2015)

Outstanding Value (08.02.2016)

Fits Colt 1991A1 (07.03.2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie
In alternativa

BENELLI U.S.A. CARRIER SPRING FOR CENTRO/SPORT
CARRIER SPRING

BENELLI U.S.A.

Riordinato

CHF 17.90 *

Molla portaotturatore

BENELLI U.S.A. CARRIER SPRING PLUNGER FOR CENTRO/SPORT
CARRIER SPRING PLUNGER

BENELLI U.S.A.

Riordinato

CHF 19.90 *

Perni e spine portaotturatore

BENELLI U.S.A. FIRING PIN RETAINING PIN FOR CENTRO/SPORT
FIRING PIN RETAINING PIN

BENELLI U.S.A.

Riordinato

CHF 18.90 *

Spina di ritenzione percussore

BENELLI U.S.A. BOLT CAM PIN FOR CENTRO/SPORT
LOCKING HEAD PIN

BENELLI U.S.A.

Riordinato

CHF 34.90 *

Viti per otturatore

KICK-EEZ CHEEK-EEZ 1/2" PITCH SPACER PLASTIC BLACK
RIFLE PITCH SPACER

KICK-EEZ

Riordinato

CHF 21.90 * CHF 16.90 - CHF 21.90*

Distanziatori per calcio

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.