Helps Prevent Jams By Making Sure Each Round Meets Specs Before Shooting
Make sure all your ammo is in spec before you shoot that critical match. One tool lets you check four popular calibers used in practical shooting matches: 9mm, .38 Super, .40 S&W, and .45 ACP. Helps you avoid jams, misfires, feeding problems, and other malfunctions caused by out-of-spec ammo that can cost you precious points—or the whole match. Machined aluminum with check holes precision bored using the same high-quality Clymer reamers.
Verhindert Staus, indem sichergestellt wird, dass jede Runde den Spezifikationen vor dem Aufnehmen entspricht
Stellen Sie sicher, dass Ihre gesamte Munition den Spezifikationen entspricht, bevor Sie das kritische Match abschiessen. Mit einem Tool können Sie vier gängige Kaliber überprüfen, die in praktischen Schiesswettbewerben verwendet werden: 9 mm, .38 Super, .40 S & W und .45 ACP. Vermeiden Sie Papierstaus, Aussetzer, Probleme mit der Zuführung und andere Fehlfunktionen, die durch nicht bestimmungsgemässe Munition verursacht werden und Sie wertvolle Punkte oder das gesamte Spiel kosten können. Gefrästes Aluminium mit Kontrolllöchern, die mit denselben hochwertigen Clymer-Reibahlen präzise gebohrt wurden.
TECHNISCHE DATEN: 6061 T6 Aluminium, eloxiert, schwarz. 7,6 cm lang, 2,5 cm breit und 3,2 cm hoch.
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.7
Neat Tool(25.02.2010)
Great tool, I had about 1000 45ACP rounds loaded and I would occasionally have one that would keep the slide from going into full battery. Apparently, I had a few cast bullets that came out of one mould station that were a tad out of spec (20 yr old lee mould). This tool helped me sort through all that ammo in just a jiffy. I only wish they made them in more calibers.
One great tool!(04.11.2010)
If you reload, this thing is wonderful. I wish I had one of these years ago.
A must for remanufactured ammo(16.11.2014)
After having a remanufactured round jam in the chamber and prevent the the slide from going into battery on my 9mm 1911, I got this gage to check all my remanufactured ammo. Previously I had removed the barrel to do case checking. Comparing good vs bad rounds, it gave the same results as the barrel.
My only concern is that the aluminum may be subject to wear. After a couple thousand rounds, I can see some wear on the corner of the machined hole. But it will probably provide years of good service. Having all four major handgun calibers is convenient and it is not too bad doing the rounds one at a time.
So far I have weeded out about 75 rounds out of 2500 of 9mm. The bad rounds range from won't fit, but nothing visibly wrong, to crimped brass and improperly seated bullets. Had better luck with .45, checked about 500 rounds and all were good.
Artikel-Nr.: 296000125 EGW 4 CALIBER CHECKER (9MM, .40 S&W, .45 ACP & 38 SUPER) Herstellerproduktnummer: 70100841370107599 Stellen Sie sicher, dass Ihre gesamte Munition den Spezifikationen entspricht, bevor Sie das kritische Match abschiessen. Mit einem Tool können Sie vier gängige Kaliber überprüfen, die in praktischen Schiesswettbewerben verwendet werden: 9 mm, .38 Super, .40 S & W und .45 ACP. Vermeiden Sie Papierstaus, Aussetzer, Probleme mit der Zuführung und andere Fehlfunktionen, die durch nicht bestimmungsgemässe Munition verursacht werden und Sie wertvolle Punkte oder das gesamte Spiel kosten können. Gefrästes Aluminium mit Kontrolllöchern, die mit denselben hochwertigen Clymer-Reibahlen präzise gebohrt wurden.
34.9CHF5CHF 34.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Patrone: 45 Auto (ACP), 9 mm Luger, 40 S&W, 38 Super
Helps Prevent Jams By Making Sure Each Round Meets Specs Before Shooting
Make sure all your ammo is in spec before you shoot that critical match. One tool lets you check four popular calibers used in practical shooting matches: 9mm, .38 Super, .40 S&W, and .45 ACP. Helps you avoid jams, misfires, feeding problems, and other malfunctions caused by out-of-spec ammo that can cost you precious points—or the whole match. Machined aluminum with check holes precision bored using the same high-quality Clymer reamers.
Verhindert Staus, indem sichergestellt wird, dass jede Runde den Spezifikationen vor dem Aufnehmen entspricht
Stellen Sie sicher, dass Ihre gesamte Munition den Spezifikationen entspricht, bevor Sie das kritische Match abschiessen. Mit einem Tool können Sie vier gängige Kaliber überprüfen, die in praktischen Schiesswettbewerben verwendet werden: 9 mm, .38 Super, .40 S & W und .45 ACP. Vermeiden Sie Papierstaus, Aussetzer, Probleme mit der Zuführung und andere Fehlfunktionen, die durch nicht bestimmungsgemässe Munition verursacht werden und Sie wertvolle Punkte oder das gesamte Spiel kosten können. Gefrästes Aluminium mit Kontrolllöchern, die mit denselben hochwertigen Clymer-Reibahlen präzise gebohrt wurden.
TECHNISCHE DATEN: 6061 T6 Aluminium, eloxiert, schwarz. 7,6 cm lang, 2,5 cm breit und 3,2 cm hoch.
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.7
Neat Tool(25.02.2010)
Great tool, I had about 1000 45ACP rounds loaded and I would occasionally have one that would keep the slide from going into full battery. Apparently, I had a few cast bullets that came out of one mould station that were a tad out of spec (20 yr old lee mould). This tool helped me sort through all that ammo in just a jiffy. I only wish they made them in more calibers.
One great tool!(04.11.2010)
If you reload, this thing is wonderful. I wish I had one of these years ago.
A must for remanufactured ammo(16.11.2014)
After having a remanufactured round jam in the chamber and prevent the the slide from going into battery on my 9mm 1911, I got this gage to check all my remanufactured ammo. Previously I had removed the barrel to do case checking. Comparing good vs bad rounds, it gave the same results as the barrel.
My only concern is that the aluminum may be subject to wear. After a couple thousand rounds, I can see some wear on the corner of the machined hole. But it will probably provide years of good service. Having all four major handgun calibers is convenient and it is not too bad doing the rounds one at a time.
So far I have weeded out about 75 rounds out of 2500 of 9mm. The bad rounds range from won't fit, but nothing visibly wrong, to crimped brass and improperly seated bullets. Had better luck with .45, checked about 500 rounds and all were good.