Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

AMERICAN DEFENSE MANUFACTURING
AIMPOINT LOW PROFILE MOUNT

818503010088 100003652
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Low positions the scope as close as possible to the top of the receiver.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Low - .520” high.

239.9 239.9 1 CHF
Artikel-Nr.: 100003652
AMERICAN DEFENSE MANUFACTURING AIMPOINT LOW PROFILE MOUNT
Herstellerproduktnummer: AD68LSTD 818503010088 Das Schnellverschluss-Hebelsystem klemmt fest an der Schiene und löst sich auch bei starkem Rückstoss nicht. Je mehr Kraft auf den Hebel einwirkt, desto fester rastet er ein. Drücken Sie die Entriegelungslasche, um den Hebel zu öffnen, und die Halterung hebt sich leicht vom Gewehr ab. Mit einem Schlitzschraubendreher oder sogar einer Münze einstellbar, um eine extrem sichere, rutschfeste Passform für fast alle Picatinny- oder Weaver-Schienen zu erhalten, einschliesslich über- oder untergrosser Handelsschienen. Der Hebel kann so konfiguriert werden, dass er nach vorne oder hinten einrastet, je nach Wunsch des Bedieners. Der grosse Verriegelungsbügel an der Seite der Halterung nimmt die maximale Schienenfläche ein, während der Querbolzen und die zwei integrierten Verriegelungsnasen einen stabilen Eingriff der Schienenschlitze gewährleisten, um eine Bewegung beim Rückstoss zu verhindern. Fünf Sechskantschrauben aus Hochleistungsstahl (drei oben, zwei unten) klemmen die vertikal geteilten Ringhälften zusammen. Ausschnitte an den Ringseiten und im Boden reduzieren das Gewicht ohne Einbussen bei der Festigkeit. Die AD-68 Aimpoint-Halterung ist für Aimpoint-Optiken oder ähnliche Zielgeräte vorgesehen, für die ein einzelner 30-mm-Ring erforderlich ist, einschliesslich der Comp C3- und M2 / ML2 / M3 / ML3-Serien. Erhältlich in vier Konfigurationen für eine Vielzahl von Montageanforderungen. Niedrig positioniert das Zielfernrohr so nah wie möglich an der Oberseite des Empfängers.
239.9 CHF 4 CHF 239.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Low Profile Basenanzahl: 1-Piece Farbe: Matte Black Finish: Black Grösse: Low Hersteller/Modell: AR-15 Höhe: .520'' Rohrdurchmesser des Zielfernrohres: 30mm

Eigenschaften

Art: Low Profile Basenanzahl: 1-Piece Farbe: Matte Black Finish: Black Grösse: Low Hersteller/Modell: AR-15 Höhe: .520'' Rohrdurchmesser des Zielfernrohres: 30mm Versandgewicht: 0.159kg Versandhöhe: 64mm Versandbreite: 89mm Versandlänge: 145mm

Artikeldetails

Made in USA



Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Low positions the scope as close as possible to the top of the receiver.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Low - .520” high.

Newsletter