Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

BRAVO COMPANY
AR-15 BCMGUNFIGHTER CHARGING HANDLE GEN 2 BLACK

812526021212 100027145
Easier To Locate, Grasp & Operate - and Stronger - Than "Mil-Spec" Handles
The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
114.9 114.9 2 CHF
New
N. prodotto: 100027145
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 3B LARGE LATCH
Parti Fabbricante: BCMGFHMOD3B556 812526021212 La maniglia di ricarica originale di BCMGunfighter AR-15 era un miglioramento enorme sopra la maniglia ed esile standard "mi-spec". E ora BCM introduce il loro armamento di Gen 2 - migliorato, aggiornato e raffinato rispetto all'originale già eccellente. Una differenza chiave è che è non è più necessario preoccuparsi di rompere il perno quando devi mettere "grinta" sul manico. Geometria ridisegnata prende lo stress fuori il chiavistello e reindirizza nella ben più forte T-maniglia stessa. Il risultato è un tiro dritto che mantiene l'energia più vicino all'asse di mezzeria del fucile, così voi non ruotare l'impugnatura, rischiando una pausa, soprattutto quando la ricarica con la mano di sostegno di funzionamento. Gestire BCMGunfighter Gen2 ricarica ha anche uno scudo ridisegnato che impedisce il gas che soffia indietro nel tuo volto quando si sta eseguendo il tuo fucile soppresso. Bordi smussati ottimizzano i contorni della maniglia per un facile da afferrare, il profilo di strappo-libero. Si adatta a tutti i mil-spec urto diretto AR-15 ricevitori superiore Snag-free Mod 3B e 4B Mod configurazioni (descritte sotto) robusto forgiato 7075 T6 alluminio costruzione Mil-A-8625F, tipo III, classe 2 hardcoat anodizzato per migliorata resistenza superficiale non compatibile con gas regolabile con chiave bullone / vettore gruppi The BCMGunfighter Gen 2 AR-15 ricarica maniglia offre un'ampia superficie di fidanzamento mano rispetto a un handle di mil-spec accoppiato con una silhouette più piccola. È disponibile in Mod 3B (grande fermo) e 4B Mod (medie scrocco) configurazioni. In entrambi i casi, è sicuro per migliorare l'affidabilità, la facilità di funzionamento e sì, sguardi di tuo AR-15.
114.9 CHF 4 CHF 114.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche

Peso della spedizione: 0.074kg Altezza di spedizione: 25mm Larghezza di spedizione: 127mm Lunghezza di spedizione: 229mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x



New
N. prodotto: 100027144
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 4B MEDIUM LATCH
Parti Fabbricante: BCMGFHMOD4B556 812526021229 La maniglia di ricarica originale di BCMGunfighter AR-15 era un miglioramento enorme sopra la maniglia ed esile standard "mi-spec". E ora BCM introduce il loro armamento di Gen 2 - migliorato, aggiornato e raffinato rispetto all'originale già eccellente. Una differenza chiave è che è non è più necessario preoccuparsi di rompere il perno quando devi mettere "grinta" sul manico. Geometria ridisegnata prende lo stress fuori il chiavistello e reindirizza nella ben più forte T-maniglia stessa. Il risultato è un tiro dritto che mantiene l'energia più vicino all'asse di mezzeria del fucile, così voi non ruotare l'impugnatura, rischiando una pausa, soprattutto quando la ricarica con la mano di sostegno di funzionamento. Gestire BCMGunfighter Gen2 ricarica ha anche uno scudo ridisegnato che impedisce il gas che soffia indietro nel tuo volto quando si sta eseguendo il tuo fucile soppresso. Bordi smussati ottimizzano i contorni della maniglia per un facile da afferrare, il profilo di strappo-libero. Si adatta a tutti i mil-spec urto diretto AR-15 ricevitori superiore Snag-free Mod 3B e 4B Mod configurazioni (descritte sotto) robusto forgiato 7075 T6 alluminio costruzione Mil-A-8625F, tipo III, classe 2 hardcoat anodizzato per migliorata resistenza superficiale non compatibile con gas regolabile con chiave bullone / vettore gruppi The BCMGunfighter Gen 2 AR-15 ricarica maniglia offre un'ampia superficie di fidanzamento mano rispetto a un handle di mil-spec accoppiato con una silhouette più piccola. È disponibile in Mod 3B (grande fermo) e 4B Mod (medie scrocco) configurazioni. In entrambi i casi, è sicuro per migliorare l'affidabilità, la facilità di funzionamento e sì, sguardi di tuo AR-15.
114.9 CHF 0 CHF 114.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Easier To Locate, Grasp & Operate - and Stronger - Than "Mil-Spec" Handles
The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
Newsletter