Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

BRAVO COMPANY
AR-15 BCMGUNFIGHTER CHARGING HANDLE GEN 2 BLACK

812526021229 100027144
Easier To Locate, Grasp & Operate - and Stronger - Than "Mil-Spec" Handles
The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
114.9 114.9 2 CHF
New
Référence: 100027144
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 4B MEDIUM LATCH
Ref Fabricant: BCMGFHMOD4B556 812526021229 La poignée d’armement BCMGunfighter AR-15 originale était une amélioration massive sur la poignée de « mi-spec » standard grêle. Et maintenant le BCM introduit leur poignée d’armement Gen 2 - amélioré, mis à jour et affinée au fil de l’original déjà excellent. Une différence essentielle est que vous n’avez plus besoin de soucier de casser le pivot lorsqu’il faut mettre quelques « punch » sur la poignée. Géométrie redessinée prend la tension sur la broche de verrouillage et il redirige vers la poignée en T beaucoup plus forte elle-même. Il en résulte une traction rectiligne qui conserve l’énergie plus près à la ligne médiane du fusil, donc vous ne tournez la poignée, risquer une rupture, surtout lorsque vous utilisez la recharge avec la main de prise en charge. La poignée de charge de BCMGunfighter Gen2 possède également un bouclier redessiné qui empêche les gaz de soufflant de retour dans votre visage lorsque vous exécutez votre fusil supprimée. Bords biseautés optimisent les contours de la poignée pour un facile à saisir, accroc-libre de profil. S’adapte à tous les mil-spec direct impingement AR-15 récepteurs supérieure accroc-libre Mod 3 b et 4 b Mod configurations (décrites ci-dessous) Robust forgé 7075 T6 aluminium construction Mil-A-8625F, Type III, classe 2 hardcoat anodisé pour enhanced surface force pas compatible avec gaz réglable assortie boulon / transporteur groupes The BCMGunfighter Gen 2 AR-15 charge poignée offre une plus grande surface d’engagement de main qu’une poignée de mil-spec couplée avec une silhouette plus petite. Il est disponible en 3 b Mod (gros verrou) et configurations (moyenne latch) Mod 4 b. Quoi qu’il en soit, c’est sûr afin d’améliorer la fiabilité, la facilité d’opération et oui, regards de votre AR-15.
114.9 CHF 0 CHF 114.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.075kg Hauteur d'expédition: 25mm Largeur d'expédition: 127mm Longueur d'expédition: 229mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x



New
Référence: 100027145
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 3B LARGE LATCH
Ref Fabricant: BCMGFHMOD3B556 812526021212 La poignée d’armement BCMGunfighter AR-15 originale était une amélioration massive sur la poignée de « mi-spec » standard grêle. Et maintenant le BCM introduit leur poignée d’armement Gen 2 - amélioré, mis à jour et affinée au fil de l’original déjà excellent. Une différence essentielle est que vous n’avez plus besoin de soucier de casser le pivot lorsqu’il faut mettre quelques « punch » sur la poignée. Géométrie redessinée prend la tension sur la broche de verrouillage et il redirige vers la poignée en T beaucoup plus forte elle-même. Il en résulte une traction rectiligne qui conserve l’énergie plus près à la ligne médiane du fusil, donc vous ne tournez la poignée, risquer une rupture, surtout lorsque vous utilisez la recharge avec la main de prise en charge. La poignée de charge de BCMGunfighter Gen2 possède également un bouclier redessiné qui empêche les gaz de soufflant de retour dans votre visage lorsque vous exécutez votre fusil supprimée. Bords biseautés optimisent les contours de la poignée pour un facile à saisir, accroc-libre de profil. S’adapte à tous les mil-spec direct impingement AR-15 récepteurs supérieure accroc-libre Mod 3 b et 4 b Mod configurations (décrites ci-dessous) Robust forgé 7075 T6 aluminium construction Mil-A-8625F, Type III, classe 2 hardcoat anodisé pour enhanced surface force pas compatible avec gaz réglable assortie boulon / transporteur groupes The BCMGunfighter Gen 2 AR-15 charge poignée offre une plus grande surface d’engagement de main qu’une poignée de mil-spec couplée avec une silhouette plus petite. Il est disponible en 3 b Mod (gros verrou) et configurations (moyenne latch) Mod 4 b. Quoi qu’il en soit, c’est sûr afin d’améliorer la fiabilité, la facilité d’opération et oui, regards de votre AR-15.
114.9 CHF 4 CHF 114.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Easier To Locate, Grasp & Operate - and Stronger - Than "Mil-Spec" Handles
The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
Newsletter