Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish. Wrench flats on top and bottom for easy installation and removal.
SPECS: HTSR 416 stainless steel, HRC 28-32, DLC finish - matte black. 5.56 version is 1.125" wide, .990" high, 2.225" long (.750" dia. at barrel), 3.3 oz. weight. Fits .223/5.56mm caliber rifles with 1/2-28 threads.
Plus...
Conçu pour les applications tactiques qui requièrent la signature d’un minimum de poussière. Un déflecteur de souffle symétrique massive, combiné avec deux indemnisé avant chicanes, rediriger les gaz vers les côtés et vers le haut offrant réduction de recul inégalée tout en minimisant le museau montent et perturbation de la terre. Fils de classe-3 haute tolérance usinés dans la même opération comme porté ouverture assure la concentricité parfaite ; Ceci, combiné avec une épaisseur de déflecteur progressivement décroissante minimise les perturbations de vol de balle ayant pour résultat moins lacet, BC plus élevé et amélioration de la précision. Ordinateur FEA optimisée pour une résistance maximale à la survivabilité ratio et l’impact de poids. CNC de précision usinés haute résistance bar acier inoxydable série 400 HTSR pour une résistance thermique et à la corrosion supérieure. Disponible dans une finition noire mate DLC (carbone Diamond-Like) résistant à l’usure ultra, ou en acier inoxydable dans-le-blanc, finition satinée. Appartements de clé en haut et en bas pour faciliter l’installation et l’enlèvement. Alignement de museau accu-lave-glace conseillé pour l’installation.
Spécifications : HTSR 416 inox acier, HRC 28-32, DLC fini satiné - mat noir ou inox dans le blanc -. 5,56 version est large, 1.125". 990", 2,225" de long (. 750 » ø à Canon), poids 3,3 oz. Correspond à des fusils de calibre.223/5.56mm avec filetage 1/2-28.
Plus...
Évaluations client de PRECISION ARMAMENT M11-SPR MUZZLE BRAKE 22 CALIBER 1/2-28 SS BLACK
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.8
Moves a ton of air!(05.05.2015)
I have installed this Muzzle break on my DMR. With a Brownells stainless steel 20 inch .223 Wylde barrel I am getting groups of 3/4 inch at 900 yards with 80 grain Hornday A-Max bullet with a 28.5 grain of Hogdon Varget Powder.
Last weekend while I was out with a 07 ffl class 2 sot that I know I threw it on a NFA registered lower and I can say that it stays level in full auto with almost no muzzle jump and is very controllable in full auto.
It relieves so much gas its like a fan for people standing 10-15ft on either side. This does not effect the shooter, but people around you at a range will get very annoyed.
All in all it does exactly what it is designed to do I love it and I will buy several more for future builds.
We shoot metal out to 400 yards off bipod and bags several times a week at our house. Going through several hundred rounds or more. I put this muzzle break on my AR (.223) first and it allowed me to stay on target looking through the scope. Barrel rise was eliminated, recoil felt like a .22. After my 15yr old shot it of course he had to have one. If you shoot metal or predators or anything it's a must. You will love it.
Effective brake(27.05.2016)
I installed this brake on a 3 gun build using a criterion hybrid 16" .223 wylde barrel also from Brownells. The gun shoots great. The barrel is very accurate and the brake does a pretty good job of mitigating recoil. The concussion is substantial when shooting indoors or under a roof but it does it's job.
My only complaint about this is the cost of the shim pack they recommend for aligning the brake. At $24.99 it seems a bit ridiculous and adds substantially to the cost of the brake. For the price of this brake it would be nice if they included the shims like other manufacturers do with less expensive brakes.
Référence: 100014396 PRECISION ARMAMENT M11-SPR MUZZLE BRAKE 22 CALIBER 1/2-28 SS BLACK Ref Fabricant: A04018 Conçu pour les applications tactiques qui requièrent la signature d’un minimum de poussière. Un déflecteur de souffle symétrique massive, combiné avec deux indemnisé avant chicanes, rediriger les gaz vers les côtés et vers le haut offrant réduction de recul inégalée tout en minimisant le museau montent et perturbation de la terre. Fils de classe-3 haute tolérance usinés dans la même opération comme porté ouverture assure la concentricité parfaite ; Ceci, combiné avec une épaisseur de déflecteur progressivement décroissante minimise les perturbations de vol de balle ayant pour résultat moins lacet, BC plus élevé et amélioration de la précision. Ordinateur FEA optimisée pour une résistance maximale à la survivabilité ratio et l’impact de poids. CNC de précision usinés haute résistance bar acier inoxydable série 400 HTSR pour une résistance thermique et à la corrosion supérieure. Disponible dans une finition noire mate DLC (carbone Diamond-Like) résistant à l’usure ultra, ou en acier inoxydable dans-le-blanc, finition satinée. Appartements de clé en haut et en bas pour faciliter l’installation et l’enlèvement. Alignement de museau accu-lave-glace conseillé pour l’installation.
144.9CHF2CHF 144.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish. Wrench flats on top and bottom for easy installation and removal.
SPECS: HTSR 416 stainless steel, HRC 28-32, DLC finish - matte black. 5.56 version is 1.125" wide, .990" high, 2.225" long (.750" dia. at barrel), 3.3 oz. weight. Fits .223/5.56mm caliber rifles with 1/2-28 threads.
Plus...
Conçu pour les applications tactiques qui requièrent la signature d’un minimum de poussière. Un déflecteur de souffle symétrique massive, combiné avec deux indemnisé avant chicanes, rediriger les gaz vers les côtés et vers le haut offrant réduction de recul inégalée tout en minimisant le museau montent et perturbation de la terre. Fils de classe-3 haute tolérance usinés dans la même opération comme porté ouverture assure la concentricité parfaite ; Ceci, combiné avec une épaisseur de déflecteur progressivement décroissante minimise les perturbations de vol de balle ayant pour résultat moins lacet, BC plus élevé et amélioration de la précision. Ordinateur FEA optimisée pour une résistance maximale à la survivabilité ratio et l’impact de poids. CNC de précision usinés haute résistance bar acier inoxydable série 400 HTSR pour une résistance thermique et à la corrosion supérieure. Disponible dans une finition noire mate DLC (carbone Diamond-Like) résistant à l’usure ultra, ou en acier inoxydable dans-le-blanc, finition satinée. Appartements de clé en haut et en bas pour faciliter l’installation et l’enlèvement. Alignement de museau accu-lave-glace conseillé pour l’installation.
Spécifications : HTSR 416 inox acier, HRC 28-32, DLC fini satiné - mat noir ou inox dans le blanc -. 5,56 version est large, 1.125". 990", 2,225" de long (. 750 » ø à Canon), poids 3,3 oz. Correspond à des fusils de calibre.223/5.56mm avec filetage 1/2-28.
Plus...
Évaluations client de PRECISION ARMAMENT M11-SPR MUZZLE BRAKE 22 CALIBER 1/2-28 SS BLACK
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.8
Moves a ton of air!(05.05.2015)
I have installed this Muzzle break on my DMR. With a Brownells stainless steel 20 inch .223 Wylde barrel I am getting groups of 3/4 inch at 900 yards with 80 grain Hornday A-Max bullet with a 28.5 grain of Hogdon Varget Powder.
Last weekend while I was out with a 07 ffl class 2 sot that I know I threw it on a NFA registered lower and I can say that it stays level in full auto with almost no muzzle jump and is very controllable in full auto.
It relieves so much gas its like a fan for people standing 10-15ft on either side. This does not effect the shooter, but people around you at a range will get very annoyed.
All in all it does exactly what it is designed to do I love it and I will buy several more for future builds.
We shoot metal out to 400 yards off bipod and bags several times a week at our house. Going through several hundred rounds or more. I put this muzzle break on my AR (.223) first and it allowed me to stay on target looking through the scope. Barrel rise was eliminated, recoil felt like a .22. After my 15yr old shot it of course he had to have one. If you shoot metal or predators or anything it's a must. You will love it.
Effective brake(27.05.2016)
I installed this brake on a 3 gun build using a criterion hybrid 16" .223 wylde barrel also from Brownells. The gun shoots great. The barrel is very accurate and the brake does a pretty good job of mitigating recoil. The concussion is substantial when shooting indoors or under a roof but it does it's job.
My only complaint about this is the cost of the shim pack they recommend for aligning the brake. At $24.99 it seems a bit ridiculous and adds substantially to the cost of the brake. For the price of this brake it would be nice if they included the shims like other manufacturers do with less expensive brakes.