Permanently Mounted At 45/ Offset For Instant Shift From Primary Optic To Backup Sights
Machined aluminum backup sights mount at a 45° offset angle to enable instant transition from primary optic simply by tilting the rifle. Rear sight mounts on receiver rail, front sight on handguard top rail. Mounts on right side of receiver for right hand shooters, and eliminates the need to co-witness backup sights through your optic. Provides the same bore height and sight picture as standard USGI A2 sights. A2-style rear sight has flip-up long- and short-range apertures, and is adjustable for windage and elevation in ½ MOA clicks. Locking bar and crossbolt attachment system clamps securely to MIL-STD 1913 Picatinny rails and sits only .20" above the rail, so there’s no interference with the main sighting system. Front sight base won’t interfere with the beam path of military IR laser/illuminators. No special tools needed; installs using a slot tip screwdriver. Available in left hand for left hand shooters by special order.
Installé en permanence à 45 / Offset pour passage instantané d'optique primaire à sauvegarde sites
Sites de sauvegarde en aluminium usiné à Mont à un angle de décalage de 45° pour permettre le passage instantané d’optique primaire simplement en inclinant le fusil. Cran de mire se monte sur rail de récepteur, guidon sur la traverse supérieure de garde-main. Se monte sur le côté droit du récepteur pour les tireurs de la main droite et évite d’avoir à témoigner conjointement sauvegarde sites par le biais de votre optique. Fournit que le même alésage hauteur et vue photo comme sites de USGI A2 standards. A2-style dioptre a relevable longue et courte portée des ouvertures et est réglable en dérive et élévation en MOA ½ clique. Barre de verrouillage et vissez système de fixation se fixe solidement aux rails Picatinny MIL-STD 1913 et se trouve seulement. 20" au-dessus du rail, donc il n’y a pas d’interférence avec le système de visée principale. Guidon de base n’interfère pas avec la marche des rayons de militaires IR laser/enlumineurs. Aucun outil spécial requis ; s’installe à l’aide d’un tournevis à fente. Disponible dans la main gauche pour les tireurs de la main gauche en commande spéciale.
SPECS : 7075 aluminium, revêtement dur anodisé, noir. Face avant – 1 3 ⁄ 8"(3,5 cm) de long, 3" (7,6 cm) de large. poids 3,1 oz (88g). Arrière – 1"(2.5 cm) de long, 2¾ po (7 cm) de large. poids 1,5 oz (43g).
Plus...
Évaluations client de DUECK DEFENSE AR-15 OFFSET RAPID TRANSITION SIGHT SET BLACK
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
These are great!(19.11.2010)
These sights are great for 3Gun or if you like to use a higher power scope on your AR. The effort needed to cant the rifle is minimal and the sights are exactly the right height, your cheek weld isn't affected at all. A trip to the range and a few presentation drills are all you'll need. The sights are directly over the bore and the sight radius is umatched without clamping a front sight to the barrel. You can tell these were designed by a shooter.
Great sight!(06.12.2010)
Great back-up sight for competition shooting as well as law enforcement. Really sturdy and accurate!
Great sight!(06.12.2010)
The best back up I found for my scope for 3 gun shooting. Going to try a second set on my patrol rifle. Great quality, I bang the front sight around pretty hard and it has never moved.
This is the BEST sight for 3 gun match competition. I first used the JP Tactical sight, but I never could get a clear sight picture because of the short sight radius. That was a problem with my eyes, not the sight. With the Dueck Defense sighs, you can mount the rear sight back behind the ejection port and the front sight all the way out front at the end of the float tube for an 18 inch sight radius. I added Brownell's part number: 638-000-081 AR2008-NEW DESIGN AR-15 FIBER OPTIC in place of the metal post front sight. It's the Hi-Viz fiber optic front sight. This is the best set up for old far sighted eyes. Excellent quality and well built by a great fellow 3 gunner!
great sight(18.05.2012)
make sure to install the sights on the same hight as the receiver.if you install the front sight on a gas block it will need to match the hight of the receiver or you will not be able to sight in.
Ideal sights for AR-15(21.05.2012)
The picture shown is a bit deceptive, becasue with a flat top AR you can mount the back sight at the very back of the rail. These are ideal if you have an optic. The only improvement I could suggest is a tritinum post, which I added to mine. They are rock solid and very accurate at 100 yards or less.
Awesome Back Up Sights(03.01.2014)
These sights are very durable and work great as back up sights. The offset is perfect and the transition is easy. Although, for the price it should include a front sight tool.
Référence: 100006162 DUECK DEFENSE AR-15 OFFSET RAPID TRANSITION SIGHT SET BLACK Ref Fabricant: RTSSET Sites de sauvegarde en aluminium usiné à Mont à un angle de décalage de 45° pour permettre le passage instantané d’optique primaire simplement en inclinant le fusil. Cran de mire se monte sur rail de récepteur, guidon sur la traverse supérieure de garde-main. Se monte sur le côté droit du récepteur pour les tireurs de la main droite et évite d’avoir à témoigner conjointement sauvegarde sites par le biais de votre optique. Fournit que le même alésage hauteur et vue photo comme sites de USGI A2 standards. A2-style dioptre a relevable longue et courte portée des ouvertures et est réglable en dérive et élévation en MOA ½ clique. Barre de verrouillage et vissez système de fixation se fixe solidement aux rails Picatinny MIL-STD 1913 et se trouve seulement. 20" au-dessus du rail, donc il n’y a pas d’interférence avec le système de visée principale. Guidon de base n’interfère pas avec la marche des rayons de militaires IR laser/enlumineurs. Aucun outil spécial requis ; s’installe à l’aide d’un tournevis à fente. Disponible dans la main gauche pour les tireurs de la main gauche en commande spéciale.
299.9CHF0CHF 299.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Permanently Mounted At 45/ Offset For Instant Shift From Primary Optic To Backup Sights
Machined aluminum backup sights mount at a 45° offset angle to enable instant transition from primary optic simply by tilting the rifle. Rear sight mounts on receiver rail, front sight on handguard top rail. Mounts on right side of receiver for right hand shooters, and eliminates the need to co-witness backup sights through your optic. Provides the same bore height and sight picture as standard USGI A2 sights. A2-style rear sight has flip-up long- and short-range apertures, and is adjustable for windage and elevation in ½ MOA clicks. Locking bar and crossbolt attachment system clamps securely to MIL-STD 1913 Picatinny rails and sits only .20" above the rail, so there’s no interference with the main sighting system. Front sight base won’t interfere with the beam path of military IR laser/illuminators. No special tools needed; installs using a slot tip screwdriver. Available in left hand for left hand shooters by special order.
Installé en permanence à 45 / Offset pour passage instantané d'optique primaire à sauvegarde sites
Sites de sauvegarde en aluminium usiné à Mont à un angle de décalage de 45° pour permettre le passage instantané d’optique primaire simplement en inclinant le fusil. Cran de mire se monte sur rail de récepteur, guidon sur la traverse supérieure de garde-main. Se monte sur le côté droit du récepteur pour les tireurs de la main droite et évite d’avoir à témoigner conjointement sauvegarde sites par le biais de votre optique. Fournit que le même alésage hauteur et vue photo comme sites de USGI A2 standards. A2-style dioptre a relevable longue et courte portée des ouvertures et est réglable en dérive et élévation en MOA ½ clique. Barre de verrouillage et vissez système de fixation se fixe solidement aux rails Picatinny MIL-STD 1913 et se trouve seulement. 20" au-dessus du rail, donc il n’y a pas d’interférence avec le système de visée principale. Guidon de base n’interfère pas avec la marche des rayons de militaires IR laser/enlumineurs. Aucun outil spécial requis ; s’installe à l’aide d’un tournevis à fente. Disponible dans la main gauche pour les tireurs de la main gauche en commande spéciale.
SPECS : 7075 aluminium, revêtement dur anodisé, noir. Face avant – 1 3 ⁄ 8"(3,5 cm) de long, 3" (7,6 cm) de large. poids 3,1 oz (88g). Arrière – 1"(2.5 cm) de long, 2¾ po (7 cm) de large. poids 1,5 oz (43g).
Plus...
Évaluations client de DUECK DEFENSE AR-15 OFFSET RAPID TRANSITION SIGHT SET BLACK
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
These are great!(19.11.2010)
These sights are great for 3Gun or if you like to use a higher power scope on your AR. The effort needed to cant the rifle is minimal and the sights are exactly the right height, your cheek weld isn't affected at all. A trip to the range and a few presentation drills are all you'll need. The sights are directly over the bore and the sight radius is umatched without clamping a front sight to the barrel. You can tell these were designed by a shooter.
Great sight!(06.12.2010)
Great back-up sight for competition shooting as well as law enforcement. Really sturdy and accurate!
Great sight!(06.12.2010)
The best back up I found for my scope for 3 gun shooting. Going to try a second set on my patrol rifle. Great quality, I bang the front sight around pretty hard and it has never moved.
This is the BEST sight for 3 gun match competition. I first used the JP Tactical sight, but I never could get a clear sight picture because of the short sight radius. That was a problem with my eyes, not the sight. With the Dueck Defense sighs, you can mount the rear sight back behind the ejection port and the front sight all the way out front at the end of the float tube for an 18 inch sight radius. I added Brownell's part number: 638-000-081 AR2008-NEW DESIGN AR-15 FIBER OPTIC in place of the metal post front sight. It's the Hi-Viz fiber optic front sight. This is the best set up for old far sighted eyes. Excellent quality and well built by a great fellow 3 gunner!
great sight(18.05.2012)
make sure to install the sights on the same hight as the receiver.if you install the front sight on a gas block it will need to match the hight of the receiver or you will not be able to sight in.
Ideal sights for AR-15(21.05.2012)
The picture shown is a bit deceptive, becasue with a flat top AR you can mount the back sight at the very back of the rail. These are ideal if you have an optic. The only improvement I could suggest is a tritinum post, which I added to mine. They are rock solid and very accurate at 100 yards or less.
Awesome Back Up Sights(03.01.2014)
These sights are very durable and work great as back up sights. The offset is perfect and the transition is easy. Although, for the price it should include a front sight tool.