Ihr Warenkorb ist leer.

Warenkorb

TROY INDUSTRIES
AR-15/M16 END PLATE SLING MOUNTS

812699010259 100004383

For Secure, Ambidextrous Attachment Of Slings With Push-Button QD Swivels

Replaces factory receiver end plate and provides three secure, ambidextrous attachment points for the push-button QD sling swivel. Made of hardened aluminum with extra metal at the stress points to ensure this mount won’t fail during hard use. Rounded edges resist snagging on sling or other gear. Hardcoat anodized for extra strength and wear resistance, with a matte black finish that matches most factory buffer tubes. Heavy-duty stainless steel swivel accepts slings up to 1¼" wide and allows a full 360° of rotation.

SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 1¼” (3.2cm) wide. M4 fits M4-style carbines with adjustable buttstock.

Mehr...

Zum sicheren, beidhändigen Befestigen von Schlingen mit QD-Drehknöpfen

Ersetzt die werkseitige Endplatte des Empfängers und bietet drei sichere, beidhändige Befestigungspunkte für den QD-Hebeldrehknopf. Hergestellt aus gehärtetem Aluminium mit zusätzlichem Metall an den Spannungspunkten, um sicherzustellen, dass diese Halterung bei hartem Gebrauch nicht versagt. Abgerundete Kanten halten Schlingen und anderen Gegenständen stand. Hartbeschichtung eloxiert für zusätzliche Festigkeit und Verschleissfestigkeit mit einem mattschwarzen Finish, das zu den meisten werksseitigen Pufferrohren passt. Hochleistungswirbel aus rostfreiem Stahl, der Schlingen mit einer Breite von bis zu 1¼ "aufnehmen kann und eine volle Drehung um 360 ° ermöglicht.

Technische Daten: Halterung - Aluminium, Hartbeschichtung eloxiert, mattschwarz. Wirbel - Edelstahl, mattschwarzes Finish. Akzeptiert Schlingen mit einer Breite von bis zu 3,2 cm. M4 passt für Karabiner im M4-Stil mit verstellbarem Gesäss.

Mehr...

Kundenbewertungen zu TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3.7

Quality QD Mount but... (26.11.2011)

I love the QD 1-1/4" sling swivel type attachment and Troy makes quality products. The problem with this one comes when you try and tighten the castle nut on your buffer tube back down after the Troy plate in on there. Depending on the position, not all castle nut wrenches will work on this job. It is also very easy to scratch the threads of your buffer tube or other areas. You cannot use the three contact point type wrench to tighten it down because the QD points are in the way.
So as long as you can get it tightened (I suggest the single contact castle nut wrench) it is a quality made product that looks very nice when installed properly and works as a great attachment point for a 3 point sling setup.

Very difficult to tighten (01.01.2012)

The sling mount itself is great EXCEPT for one major flaw imo - you can't tighten it well with a normal 3-point castle nut wrench because the QD points bulge out. Even with an old style single point wrench it's awkward to do depending on where your notches are when it's time to fully tighten. You may end up having to try and tighten at an angle... and pray it doesn't loosen up with use. Come on Troy, provide better info on this before people buy it, or provide a tool with the sling to simplify this process.

Great product, no install issues (28.08.2012)

This endplate looks great and was easy to install. I had zero issues using the Rock River M4 Stock Wrench (brownells# AR0165)to tighten down the castle nut with this endplate. Can't wait to put a sling on this bad boy...

Quality part (15.09.2012)

Quality product from a quality manufacturer. I really like the option of mounting sling on either side. This product is also compatible with Magpul STR stock allowing quick detach swivel from end plate to mount directly onto stock attachment point

Not 360Â° of rotation (18.11.2013)

No problems installing with standard 3 point armoror's wrench or single point spanner wrench. However, the swivel does not provide for 360Â° of rotation as described. There are limit "stops" milled in just like Troy's rail attachment part 100-005-083WB.

I would have preferred the 360Â° rotation as described in order to allow free movement of a 3-point sling.

Look before buying (28.12.2013)

Hello all,
I don't know if I got a out of spec buffer tube but the castle nut would not let the mount go far enough back without the mount rubbing on the receiver. I had to file flats on the round parts to allow the mount to clear. Also it will not work with an oversized forward assist. Since I filed it I won't be sending it back but will eat the price and order another style. Where the quick detach are need to be set back a little bit

Buyer beware - may not work for your gun (17.01.2015)

I own a lot of Troy products, but this one has left me shaking my head and $40 poorer. I read the previous reviews about issues using a 3-point wrench on the castle nut, but I've dealt with that before on other products and gotten past it with a little ingenuity. Be aware though, you may not even get that far. In building up an SBR, I purchased the LWRC UCIW stock to reduce additional length. The round QD receiver knobs on this end plate will not allow the buffer tube of the UCIW to screw in to the receiver far enough to capture the buffer detent. I even tried to grind the knobs to get enough clearance to be able to rotate the buffer tube to get enough threaded in to the receiver. You'd have to remove so much metal that there would be no structural integrity. I use my rifles for work and I don't need the rifle coming off the sling during an op. Clearly, others have been able to get this on some rifles as I've seen photos, but if you do buy it, test fit it first and don't try to "smith" it in to place. Just return it and get another SPS mount for half the price.

Another great product from Troy! (06.01.2017)

After reading some of the other reviews, I was a little hesitant about ordering this. I'm not a fan of "minor modification required". After disassembly I test fit every thing just to be sure and there was adequate clearance where needed and no excess where not. I installed this on my FN15 in about 15 minutes total and love it. Works great with the Troy single point sling. NOTE: There must be an updated version as the one I received has a third connection point at the bottom rear of part (where the print is in the photo).

Does not fit Ruger SR-762 (17.02.2017)

Great product, well made. Does not fit Ruger SR-762. Had to use a different adaptor.

They work fine! (24.09.2018)

No Sir, my experience with this Troy sling mount is very good. I have used it on mil spec tubes, commercial tubes, and pistol only tubes. This mount worked on all of them. I used the Rock River 3 point wrench to tighten the nut. Those that have complained that it didn't work must of had a tube with shorter then normal threads. It works great. Mine has the attachment points on both sides and one in the middle. I couldn't ask for better

Lesen Sie 10 weitere Bewertungen bei brownells.com

79.9 79.9 1 CHF

Artikel-Nr.: 100004383
TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK
Herstellerproduktnummer: SMOUM4S00BT00 812699010259 Ersetzt die werkseitige Endplatte des Empfängers und bietet drei sichere, beidhändige Befestigungspunkte für den QD-Hebeldrehknopf. Hergestellt aus gehärtetem Aluminium mit zusätzlichem Metall an den Spannungspunkten, um sicherzustellen, dass diese Halterung bei hartem Gebrauch nicht versagt. Abgerundete Kanten halten Schlingen und anderen Gegenständen stand. Hartbeschichtung eloxiert für zusätzliche Festigkeit und Verschleissfestigkeit mit einem mattschwarzen Finish, das zu den meisten werksseitigen Pufferrohren passt. Hochleistungswirbel aus rostfreiem Stahl, der Schlingen mit einer Breite von bis zu 1¼ "aufnehmen kann und eine volle Drehung um 360 ° ermöglicht.

79.9 CHF 0 CHF 79.90 *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften: Art: Rifle Sling Adapter Farbe: Black Material: Steel

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Rifle Sling Adapter Farbe: Black Material: Steel Versandgewicht: 0.045kg Versandhöhe: 13mm Versandbreite: 84mm Versandlänge: 97mm

Artikeldetails

Made in USA

For Secure, Ambidextrous Attachment Of Slings With Push-Button QD Swivels

SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 1¼” (3.2cm) wide. M4 fits M4-style carbines with adjustable buttstock.

Mehr...

Zum sicheren, beidhändigen Befestigen von Schlingen mit QD-Drehknöpfen

Mehr...

Kundenbewertungen zu TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3.7

Quality QD Mount but... (26.11.2011)

Very difficult to tighten (01.01.2012)

Great product, no install issues (28.08.2012)

Quality part (15.09.2012)

Not 360Â° of rotation (18.11.2013)

Look before buying (28.12.2013)

Buyer beware - may not work for your gun (17.01.2015)

Another great product from Troy! (06.01.2017)

Does not fit Ruger SR-762 (17.02.2017)

Great product, well made. Does not fit Ruger SR-762. Had to use a different adaptor.

They work fine! (24.09.2018)

Lesen Sie 10 weitere Bewertungen bei brownells.com

Kunden kauften auch

BROWNELLS 3/32" DIA., 5/16" (8MM) LENGTH ROLL PINS 36 PACK
BLACK ROLL PIN KIT

BROWNELLS

Auf Lager

CHF 12.90 * CHF 9.90 - CHF 134.90*

Spannstifte

ROCK RIVER ARMS M4 STOCK WRENCH
AR-15 M4 STOCK WRENCH

ROCK RIVER ARMS

Auf Lager

CHF 15.90 *

Schraubenschlüssel

3.7

MAGPUL RSA QD RAIL SLING ATTACHMENT
RSA QUICK DETACH SLING ATTACHMENT

MAGPUL

Auf Lager

CHF 43.90 *

taktische Riemenbügel

BONDHUS PROHOLD TIP BALL END L-WRENCHES-INCH
PROHOLD TIP BALL END WRENCHES

BONDHUS

Auf Lager

CHF 45.90 * CHF 41.90 - CHF 45.90*

General-Schraubenschlüssel

YANKEE HILL MACHINE CO., INC. EZ PULL TAKEDOWN PIN SET
AR-15/M16 EZ PULL PIVOT & TAKEDOWN PIN SET

YANKEE HILL MACHINE CO., INC.

Auf Lager

CHF 33.90 *

Stifte

4.2

Anmeldung

Kennwort vergessen?
Registrieren

SOCIAL MEDIA

Facebook

BROWNELLS.CH

PRODUKTKATEGORIEN

BESTELLEN

Kundenservice

Willkommen!

Willkommen bei brownells.ch, dem führenden Händler von Waffenteilen, Zubehör, Accessoires und Werkzeugen für Waffen in der Svizzera!

Unsere Serviceleistungen

Wenn Sie Schiessen und das Arbeiten mit Waffen mögen, ganz gleich ob als Hobby oder beruflich oder einfach nur ein Waffenbesitzer sind, bei uns sind Sie richtig!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Bastler, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertige Waffenteilen und dem Zubehör von Brownells Svizzera. Sie finden bei uns mehr als 50.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchensenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Aufrüstung Ihrer Waffen.