A "Blank Canvas" for Your Next Custom Pistol Masterpiece
Brownells Blank Slides for Glock® pistols come with the exterior left smooth and featureless so you can customize it exactly the way you want it. Add cocking serrations, an optic mounting slot, and cosmetic flourishes to make it entirely your own. (Yes, you will need to bring some machining skills to the table!) Inside, the dimensions fully machined to factory dimensions, so your Brownells Blank Slide for Glock comes ready to fit a factory-spec frame and accept Gen 3 factory and aftermarket barrels and parts. Models for Gen3 Glock® 17 Machined from firearm-grade 17-4 stainless steel Heat treated to 41-44 on the Rockwell C scale Comes "in-the-white" so you can apply the finish of your choice Includes Glock factory front and rear sight dovetails Sometimes "off the shelf" works, sometimes you want to do it your way. When you’re ready to build your own Glock®-platform Dream Gun™, reach for a Brownells Blank Slide. Channel liner required for these slides. Channel liners are a press fit and require a tool to install.
Plus...
Une « toile vierge » pour votre prochain Custom pistolet chef-d'œuvre
Brownells blanc glisse pour pistolets Glock® viennent avec l’extérieur reste lisse et sans relief, donc vous pouvez le personnaliser exactement comme vous le voulez. Ajouter armement dentelures, une optique fente de montage et de cosmétique s’épanouit pour la rendre entièrement votre propre. (Oui, vous devrez apporter certaines compétences d’usinage à la table !) A l’intérieur, les dimensions entièrement usinés aux dimensions de l’usine, donc votre diapositive vide de Brownells pour Glock est livré prêt à monter un cadre factory-spec et accepter l’usine Gen 3 et barils de marché des accessoires et pièces. Modèles pour Glock Gen3® 17 et 19 pistolets usiné d’arme à feu-17-4 acier inoxydable thermotraité à 41-44 sur l’échelle Rockwell C Comes « in-the-white », donc vous pouvez demander la finition de votre choix comprend Glock usine avant et à l’arrière vue queues d’aronde parfois « off travaux de l’étagère », parfois que vous voulez faire votre chemin. Lorsque vous êtes prêt à construire votre propre plate-forme Glock® Dream Gun™, atteindre une diapositive vierge de Brownells. Doublure de canal requis pour ces diapositives. Les revêtements de canal sont une presse monter et requièrent un outil à installer.
« GLOCK » est une marque déposée par le gouvernement fédéral de Glock, Inc. et est l’une des nombreuses marques détenues par Glock, Inc. ou Glock Ges.m.b.H. Brownells est un revendeur indépendant de pièces et accessoires pour pistolets de Glock® et n’est pas affilié à ou approuvés par Glock, Inc. ou Glock Ges.m.b.H. L’utilisation de Glock sur cette page est simplement faire de la publicité de la vente de pièces de Glock. Comme il est indiqué dans les descriptions de produit, pas toutes les pièces et accessoires sur ce site sont des produits officiels de Glock.
Plus...
Évaluations client de BROWNELLS BLANK SLIDE FOR GEN3 GLOCK 17 STAINLESS
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.9
Unfortunate Issues(22.10.2017)
Unfortunately I have had no success with this slide. Something appears to be off with the geometry of the portion of the slide that resets at the connector. It hangs up and will not allow the trigger to reset. I have swapped connectors, frames with know good ones, entire slides, all internals. The issue follows the slide. Upon comparison to a known good slide, the profile is different. Wish it weren't a problem but I cannot get it to work no matter how much fitting I try to do. This is the last week I will work on it before throwing in the towel after 3 months of labor and many many parts to diagnosis the issue. The issues I see are firing out of battery, light primer strikes, and trigger not resetting.
Unfortunately, I cannot and will not recommend this slide. Everything else about it has been great, but it does not function. I will continue to usebtge many excellent brownells products available, but this is not one of those products.
AMAZING!(10.12.2017)
I ordered this slide for my PF940c build the first week Brownells introduced this slide. Initial inspection revealed great, clean machine work! Sent my slide off to Primary Machine and had it some serrations cut & cerakote burnt bronze. I absolute the end results! Finished off this slide with a Brownells Victory First barrel, slide completion kit and I will be installing WOTG sights.
I can't wait until these slides are back in stock...I will order one as soon as they become available.
***Brownells...if you can include a channel liner, that would be FANTASTIC***
Donât forget a firing pin channel liner (01.02.2018)
Donât forget to install s firing pin channel liner or you will have light primer strikes and trigger reset issues,
Good basic G-Lock slide(17.03.2018)
Ordered for a Pylomer80 compact build. About the most economical slide on the market. Punched 30 rounds through. Some slide hang up issues. But that should free up as soon as the great frozen North warms up come spring and I go to the gun range with out freezing solid. Also hard to rack with out slide serrations. That taken care of once the Clausing 8520 mill is running.
Response to the 1 star review.(18.04.2018)
I actually purchased the G17 variant; however, as a 20 plus year Glock Certified Armorer, I would say with a very high degree of confidence that the reviewer who gave the slide a one star review claiming all of the issues with tolerance etc. failed to install a firing pin channel liner. A common mistake for those who think they know, but havenât been trained on how to properly disassemble and assemble a Glock from parts. The slide has impeccable machining, all stock parts and many quality after market parts fit and function as they should. This is a real bargain if you are planning on having aesthetic machining done to your Glock slide without carving on your stock one.
Would be great if the plunger fit(20.04.2018)
I'm an amateur Glock P80 builder. The safety plunger hole was drilled too small. I don't own a machine that can fix this. I tried a Glock OEM plunger and an aftermarket plunger, neither one fit. Other than that, the slide seems pretty well made but that doesn't matter to me because I can't use it.
Fantastic slide and great value.(18.04.2018)
Impeccable machining, fit and finish. All stock and most quality aftermarket parts will fit and function properly. A fantastic economical option if you are planning on having custom aesthetic machining work done on your Glock without carving up your stock slide. Do not forget that it will need a firing pin channel liner as it seems one reviewer of the G19 variant did and then posted a poor review. You will not be disappointed!
Référence: 078200005 BROWNELLS BLANK SLIDE FOR GEN3 GLOCK 17 STAINLESS Ref Fabricant: NONE050806112629 Brownells blanc glisse pour pistolets Glock® viennent avec l’extérieur reste lisse et sans relief, donc vous pouvez le personnaliser exactement comme vous le voulez. Ajouter armement dentelures, une optique fente de montage et de cosmétique s’épanouit pour la rendre entièrement votre propre. (Oui, vous devrez apporter certaines compétences d’usinage à la table !) A l’intérieur, les dimensions entièrement usinés aux dimensions de l’usine, donc votre diapositive vide de Brownells pour Glock est livré prêt à monter un cadre factory-spec et accepter l’usine Gen 3 et barils de marché des accessoires et pièces. Modèles pour Glock Gen3® 17 et 19 pistolets usiné d’arme à feu-17-4 acier inoxydable thermotraité à 41-44 sur l’échelle Rockwell C Comes « in-the-white », donc vous pouvez demander la finition de votre choix comprend Glock usine avant et à l’arrière vue queues d’aronde parfois « off travaux de l’étagère », parfois que vous voulez faire votre chemin. Lorsque vous êtes prêt à construire votre propre plate-forme Glock® Dream Gun™, atteindre une diapositive vierge de Brownells. Doublure de canal requis pour ces diapositives. Les revêtements de canal sont une presse monter et requièrent un outil à installer.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
A "Blank Canvas" for Your Next Custom Pistol Masterpiece
Brownells Blank Slides for Glock® pistols come with the exterior left smooth and featureless so you can customize it exactly the way you want it. Add cocking serrations, an optic mounting slot, and cosmetic flourishes to make it entirely your own. (Yes, you will need to bring some machining skills to the table!) Inside, the dimensions fully machined to factory dimensions, so your Brownells Blank Slide for Glock comes ready to fit a factory-spec frame and accept Gen 3 factory and aftermarket barrels and parts. Models for Gen3 Glock® 17 Machined from firearm-grade 17-4 stainless steel Heat treated to 41-44 on the Rockwell C scale Comes "in-the-white" so you can apply the finish of your choice Includes Glock factory front and rear sight dovetails Sometimes "off the shelf" works, sometimes you want to do it your way. When you’re ready to build your own Glock®-platform Dream Gun™, reach for a Brownells Blank Slide. Channel liner required for these slides. Channel liners are a press fit and require a tool to install.
Plus...
Une « toile vierge » pour votre prochain Custom pistolet chef-d'œuvre
Brownells blanc glisse pour pistolets Glock® viennent avec l’extérieur reste lisse et sans relief, donc vous pouvez le personnaliser exactement comme vous le voulez. Ajouter armement dentelures, une optique fente de montage et de cosmétique s’épanouit pour la rendre entièrement votre propre. (Oui, vous devrez apporter certaines compétences d’usinage à la table !) A l’intérieur, les dimensions entièrement usinés aux dimensions de l’usine, donc votre diapositive vide de Brownells pour Glock est livré prêt à monter un cadre factory-spec et accepter l’usine Gen 3 et barils de marché des accessoires et pièces. Modèles pour Glock Gen3® 17 et 19 pistolets usiné d’arme à feu-17-4 acier inoxydable thermotraité à 41-44 sur l’échelle Rockwell C Comes « in-the-white », donc vous pouvez demander la finition de votre choix comprend Glock usine avant et à l’arrière vue queues d’aronde parfois « off travaux de l’étagère », parfois que vous voulez faire votre chemin. Lorsque vous êtes prêt à construire votre propre plate-forme Glock® Dream Gun™, atteindre une diapositive vierge de Brownells. Doublure de canal requis pour ces diapositives. Les revêtements de canal sont une presse monter et requièrent un outil à installer.
« GLOCK » est une marque déposée par le gouvernement fédéral de Glock, Inc. et est l’une des nombreuses marques détenues par Glock, Inc. ou Glock Ges.m.b.H. Brownells est un revendeur indépendant de pièces et accessoires pour pistolets de Glock® et n’est pas affilié à ou approuvés par Glock, Inc. ou Glock Ges.m.b.H. L’utilisation de Glock sur cette page est simplement faire de la publicité de la vente de pièces de Glock. Comme il est indiqué dans les descriptions de produit, pas toutes les pièces et accessoires sur ce site sont des produits officiels de Glock.
Plus...
Évaluations client de BROWNELLS BLANK SLIDE FOR GEN3 GLOCK 17 STAINLESS
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.9
Unfortunate Issues(22.10.2017)
Unfortunately I have had no success with this slide. Something appears to be off with the geometry of the portion of the slide that resets at the connector. It hangs up and will not allow the trigger to reset. I have swapped connectors, frames with know good ones, entire slides, all internals. The issue follows the slide. Upon comparison to a known good slide, the profile is different. Wish it weren't a problem but I cannot get it to work no matter how much fitting I try to do. This is the last week I will work on it before throwing in the towel after 3 months of labor and many many parts to diagnosis the issue. The issues I see are firing out of battery, light primer strikes, and trigger not resetting.
Unfortunately, I cannot and will not recommend this slide. Everything else about it has been great, but it does not function. I will continue to usebtge many excellent brownells products available, but this is not one of those products.
AMAZING!(10.12.2017)
I ordered this slide for my PF940c build the first week Brownells introduced this slide. Initial inspection revealed great, clean machine work! Sent my slide off to Primary Machine and had it some serrations cut & cerakote burnt bronze. I absolute the end results! Finished off this slide with a Brownells Victory First barrel, slide completion kit and I will be installing WOTG sights.
I can't wait until these slides are back in stock...I will order one as soon as they become available.
***Brownells...if you can include a channel liner, that would be FANTASTIC***
Donât forget a firing pin channel liner (01.02.2018)
Donât forget to install s firing pin channel liner or you will have light primer strikes and trigger reset issues,
Good basic G-Lock slide(17.03.2018)
Ordered for a Pylomer80 compact build. About the most economical slide on the market. Punched 30 rounds through. Some slide hang up issues. But that should free up as soon as the great frozen North warms up come spring and I go to the gun range with out freezing solid. Also hard to rack with out slide serrations. That taken care of once the Clausing 8520 mill is running.
Response to the 1 star review.(18.04.2018)
I actually purchased the G17 variant; however, as a 20 plus year Glock Certified Armorer, I would say with a very high degree of confidence that the reviewer who gave the slide a one star review claiming all of the issues with tolerance etc. failed to install a firing pin channel liner. A common mistake for those who think they know, but havenât been trained on how to properly disassemble and assemble a Glock from parts. The slide has impeccable machining, all stock parts and many quality after market parts fit and function as they should. This is a real bargain if you are planning on having aesthetic machining done to your Glock slide without carving on your stock one.
Would be great if the plunger fit(20.04.2018)
I'm an amateur Glock P80 builder. The safety plunger hole was drilled too small. I don't own a machine that can fix this. I tried a Glock OEM plunger and an aftermarket plunger, neither one fit. Other than that, the slide seems pretty well made but that doesn't matter to me because I can't use it.
Fantastic slide and great value.(18.04.2018)
Impeccable machining, fit and finish. All stock and most quality aftermarket parts will fit and function properly. A fantastic economical option if you are planning on having custom aesthetic machining work done on your Glock without carving up your stock slide. Do not forget that it will need a firing pin channel liner as it seems one reviewer of the G19 variant did and then posted a poor review. You will not be disappointed!