Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

BROWNELLS GUN-KOTE™ OVEN CURE, GUN FINISH


Auto-Übersetzung der Beschreibung (Originalbeschreibung - Hersteller): Gloss Gunmetal Blue, Aerosol, Mehr...

050806106635 083051013
Genuine GUN-KOTE Spray-On/Bake-On Finish In Convenient Aerosol
The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours without the extra expense of owning an air brush. Brownells has teamed up with KG Products to produce the genuine GUN-KOTE epoxy finish in a convenient aerosol that’s every bit as easy and foolproof to apply as our other, great, bake-on, gun finishes. Now you can easily apply the self-lubricating benefits of molybdenum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100°, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 325° for one hour and you’re done. You’ve protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.    Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it’s applied, the only way to remove Brownells GUN-KOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that protects and wears like crazy.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.

SPECS: Aerosol - 6 oz. (170 g) weight. 

BROWNELLS
0 0 1 CHF
083051013
Gloss Gunmetal Blue, Aerosol, 6oz. 050806106635 Gloss Gunmetal Blue, Aerosol, 6oz.
Dieses Produkt kann leider nicht bestellt werden.
Eigenschaften: Farbe: Gunmetal Blue

Beschreibung

Gloss Gunmetal Blue, Aerosol, 6oz.

Eigenschaften

Farbe: Gunmetal Blue

Artikeldetails

Made in USA





Genuine GUN-KOTE Spray-On/Bake-On Finish In Convenient Aerosol
The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours without the extra expense of owning an air brush. Brownells has teamed up with KG Products to produce the genuine GUN-KOTE epoxy finish in a convenient aerosol that’s every bit as easy and foolproof to apply as our other, great, bake-on, gun finishes. Now you can easily apply the self-lubricating benefits of molybdenum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100°, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 325° for one hour and you’re done. You’ve protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.    Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it’s applied, the only way to remove Brownells GUN-KOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that protects and wears like crazy.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.

SPECS: Aerosol - 6 oz. (170 g) weight.