The adjustable width design will support all your paper and cardboard targets and will stay upright in heavy winds and extreme weather conditions. The 1/4" thick, 12" long, steel ground stake can be pushed or hammered into almost any terrain. Spring loaded tubes and thumb screws snugly secure standard 1x2 wood furring strips.Support all your paper and cardboard targets with this precision steel target holder. Designed for high wind areas and adverse weather conditions. Adjustable width for law enforcement style or IDPA / IPSC targets (18"-23").
SPECS: Brackets: 7 gauge sheet metal with 1/8" thick steel tubing and black powder coat finish. Stake: 1/4" thick steel x 13" long x 3" wide with black powder coat finish. Product Weight: 9.2 lbs.
Altro...
Il design di larghezza regolabile sosterrà tutti i carta e cartone bersagli e rimarrà in posizione verticale in venti pesanti e condizioni climatiche estreme. Il 1/4" spessa, 12" lunga, palo a terra in acciaio può essere spinto o martellato in quasi qualsiasi tipo di terreno. Molla tubi e viti ad alette comodamente fissare standard furring legno 1 x 2 strisce. Supporta tutti i carta e cartone bersagli con questo supporto di destinazione in acciaio di precisione. Progettato per le zone ventose e condizioni climatiche avverse. Regolabile in larghezza per stile di applicazione della legge o IDPA / IPSC è destinato (18"- 23").
Specifiche: staffe: 7 calibro lamiera con tubi in acciaio spessore 1/8" e rivestimento del cappotto di polvere nera. Quota: 1/4" spessore acciaio x 13" x 3" ampia con rivestimento del cappotto di polvere nera. Peso del prodotto: 9,2 libbre
Altro...
Punteggi dei clienti per CHALLENGE TARGETS HURRICANE TARGET STAND
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4
Great quality(10.11.2014)
I ordered 3 stands to use in my NRA classes. Challenge Targets has great customer service and communication. The stands are heavy duty and the construction exceeded my expectations. They should last a lifetime. I like the design and the ability to replace the upright supports. With newer shooters, they will no doubt be hit. The ability to replace them easily is a great option. I may order a few more for larger classes.
Lacking some attention to detail(29.11.2015)
I ordered the hurricane stand to try out, the range I shoot on only has a few stationary target stands and only at 50 and 100 yards. I needed some additional targets to fill the distance gap. Upon first inspection the stands look well made and robust, just based upon my experience with similar stands I think the would easily hold up to errant hits from rifle or pistol while maintaining usefulness. I have one gripe and it is to only reason I have it three stars vs five. The threaded holes that are supposed to be used to attach the adjustable horizontal supports were apparently powder coated after threading, this meant that none of the provided threaded screws would go in the holes. This was an easy fix, I just went to the hardware store and got Grade 8 1/4" bolts, nuts, and lock washers and I drilled out the holes on the target stand to 1/4" so there was no threading. This seemed much easier than returning the stand having to wait for another one, etc.
Again, if it weren't for this small flaw I would easily have given the stand five stars, but just be aware that you may have to go through the same thing if you order this.
N. prodotto: 100015367 CHALLENGE TARGETS HURRICANE TARGET STAND Parti Fabbricante: TS300683405237471 Il design di larghezza regolabile sosterrà tutti i carta e cartone bersagli e rimarrà in posizione verticale in venti pesanti e condizioni climatiche estreme. Il 1/4" spessa, 12" lunga, palo a terra in acciaio può essere spinto o martellato in quasi qualsiasi tipo di terreno. Molla tubi e viti ad alette comodamente fissare standard furring legno 1 x 2 strisce. Supporta tutti i carta e cartone bersagli con questo supporto di destinazione in acciaio di precisione. Progettato per le zone ventose e condizioni climatiche avverse. Regolabile in larghezza per stile di applicazione della legge o IDPA / IPSC è destinato (18"- 23").
139.9CHF2CHF 139.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Materiale:
Acciaio
Tipo:
Stand
Tipo:
Acciaio
Peso della spedizione: 3.719kgAltezza di spedizione: 102mmLarghezza di spedizione: 226mmLunghezza di spedizione: 564mm
The adjustable width design will support all your paper and cardboard targets and will stay upright in heavy winds and extreme weather conditions. The 1/4" thick, 12" long, steel ground stake can be pushed or hammered into almost any terrain. Spring loaded tubes and thumb screws snugly secure standard 1x2 wood furring strips.Support all your paper and cardboard targets with this precision steel target holder. Designed for high wind areas and adverse weather conditions. Adjustable width for law enforcement style or IDPA / IPSC targets (18"-23").
SPECS: Brackets: 7 gauge sheet metal with 1/8" thick steel tubing and black powder coat finish. Stake: 1/4" thick steel x 13" long x 3" wide with black powder coat finish. Product Weight: 9.2 lbs.
Altro...
Il design di larghezza regolabile sosterrà tutti i carta e cartone bersagli e rimarrà in posizione verticale in venti pesanti e condizioni climatiche estreme. Il 1/4" spessa, 12" lunga, palo a terra in acciaio può essere spinto o martellato in quasi qualsiasi tipo di terreno. Molla tubi e viti ad alette comodamente fissare standard furring legno 1 x 2 strisce. Supporta tutti i carta e cartone bersagli con questo supporto di destinazione in acciaio di precisione. Progettato per le zone ventose e condizioni climatiche avverse. Regolabile in larghezza per stile di applicazione della legge o IDPA / IPSC è destinato (18"- 23").
Specifiche: staffe: 7 calibro lamiera con tubi in acciaio spessore 1/8" e rivestimento del cappotto di polvere nera. Quota: 1/4" spessore acciaio x 13" x 3" ampia con rivestimento del cappotto di polvere nera. Peso del prodotto: 9,2 libbre
Altro...
Punteggi dei clienti per CHALLENGE TARGETS HURRICANE TARGET STAND
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4
Great quality(10.11.2014)
I ordered 3 stands to use in my NRA classes. Challenge Targets has great customer service and communication. The stands are heavy duty and the construction exceeded my expectations. They should last a lifetime. I like the design and the ability to replace the upright supports. With newer shooters, they will no doubt be hit. The ability to replace them easily is a great option. I may order a few more for larger classes.
Lacking some attention to detail(29.11.2015)
I ordered the hurricane stand to try out, the range I shoot on only has a few stationary target stands and only at 50 and 100 yards. I needed some additional targets to fill the distance gap. Upon first inspection the stands look well made and robust, just based upon my experience with similar stands I think the would easily hold up to errant hits from rifle or pistol while maintaining usefulness. I have one gripe and it is to only reason I have it three stars vs five. The threaded holes that are supposed to be used to attach the adjustable horizontal supports were apparently powder coated after threading, this meant that none of the provided threaded screws would go in the holes. This was an easy fix, I just went to the hardware store and got Grade 8 1/4" bolts, nuts, and lock washers and I drilled out the holes on the target stand to 1/4" so there was no threading. This seemed much easier than returning the stand having to wait for another one, etc.
Again, if it weren't for this small flaw I would easily have given the stand five stars, but just be aware that you may have to go through the same thing if you order this.