Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz
855016007983 100027272
Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
94.9 94.9 1 CHF
New
Artikel-Nr.: 100027272
SAMSON MANUFACTURING CORP POCKET COMP FOR S&W SHIELD, BLACK
Herstellerproduktnummer: 040603101 855016007983 Der Samson Pocket Comp für M & P Shield und Shield 2.0 9 mm wurde für 1/2 x 28 Gewindeschäfte entwickelt und lässt sich in wenigen Minuten installieren, ohne dass eine Büchsenmacherei erforderlich ist. Das Samson-Design verwendet eine Gewindeschnittstelle, die die Laufgewinde im Gegensatz zu herkömmlichen Kompensatoren schützt. Der Samson Pocket Comp für M & P 9 Shield fügt sich in die ästhetischen Linien der Folie ein und erzeugt das Bild einer Folienerweiterung. Der Pocket Comp ist aus 7075 Flugzeugknüppeln gefertigt und aus Gründen der Langlebigkeit mit Mil-Spec-Hartbeschichtung eloxiert. Der Pocket Comp reduziert effizient den Rückstoss des Filzes und das Ansteigen der Mündung und ermöglicht so eine schnellere Erholung zwischen den Schüssen. Es funktioniert mit der werkseitigen Rückholfeder mit einem breiten Bereich von Geschossgewichten und Geschwindigkeiten (124 g oder mehr werden empfohlen, kann je nach Hersteller und / oder Umgebungsbedingungen mit 115 g arbeiten). Lauf mit Gewinde NICHT im Lieferumfang enthalten Reduziert den Rückstoss des Filzes und das Ansteigen der Mündung und ermöglicht eine schnellere Erholung zwischen den Schüssen. Ideal für Pistolen mit Iron-Sight- oder Red-Dot-Ausrüstung. Gewinde auf jedem 9-mm-Lauf mit 1 / 2x28-Gewinde (nicht im Lieferumfang enthalten) -Std-Hartanodisierung für lange Lebensdauer Kein Waffenschmieden, einfache Montage / Demontage Funktionen mit werksseitiger Rückholfeder unter Verwendung einer Vielzahl von Geschossgewichten und -geschwindigkeiten (124 g oder schwerer, kann je nach Hersteller und / oder Temperatur mit 115 g arbeiten)
94.9 CHF 6 CHF 94.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Hersteller/Modell: Smith & Wesson Modell: M&P Shield

Eigenschaften

Hersteller/Modell: Smith & Wesson Modell: M&P Shield Versandgewicht: 0.059kg Versandhöhe: 38mm Versandbreite: 133mm Versandlänge: 127mm

Artikeldetails

Made in USA



Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
Newsletter