Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
855016007983 100027272
Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
94.9 94.9 1 CHF
New
N. prodotto: 100027272
SAMSON MANUFACTURING CORP POCKET COMP FOR S&W SHIELD, BLACK
Parti Fabbricante: 040603101 855016007983 Fo progettato misura 1/2 x 28 barili filettati, la tasca di Samson Comp per lo scudo M & P e scudo 2,0 mm 9 installa in pochi minuti senza la necessità di gunsmithing. Il design di Samson utilizza un'interfaccia filettata che protegge i thread di canna a differenza dei convenzionali compensatori. La tasca di Samson Comp per M & P 9 miscele di scudo con le linee estetiche della diapositiva, creando l'immagine di un'estensione di diapositiva. Alluminio billet 7075 del velivolo-grado, la tasca Comp è rivestimento duro Mil-Spec anodizzato per una maggiore durata. La tasca Comp in modo efficiente riduce rinculo e luogo museruola, permettendo un recupero più veloce tra gli scatti. Si functionswit la molla di ritrazione di fabbrica utilizzando una vasta gamma di pesi bullet e velocità (124gr o più pesanti è consigliabile, potrebbe funzionare con 115gr a seconda del produttore e/o condizioni ambientali). Barilotto filettato non incluso riduce Feltro rinculo e normale, permettendo un recupero più veloce tra gli scatti ideale per vista di ferro o red-dot attrezzata pistole discussioni su ogni 1/2 x 9 filettato 28 millimetri barile (non incluso) lavorati dal pieno del velivolo-grado 7075 con rivestimento duro mil-std anodizzato per una maggiore durata No-gunsmithing, facile installazione/rimozione funzioni con molla di ritrazione di fabbrica utilizzando una vasta gamma di pesi bullet e velocità (124gr o più pesanti, possono funzionare con 115gr a seconda del produttore e/o temperatura)
94.9 CHF 6 CHF 94.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Smith & Wesson Modello: M&P Shield

Caratteristiche

Adatto per: Smith & Wesson Modello: M&P Shield Peso della spedizione: 0.059kg Altezza di spedizione: 38mm Larghezza di spedizione: 133mm Lunghezza di spedizione: 127mm

Dettagli dell'elemento

Made in Usa



Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
Newsletter