Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

APEX TACTICAL SPECIALTIES INC
POLYMER ARMORER'S BLOCK & TOOLING PLATE

856008005284 100011660
Supports a polymer frame pistol for armory work and detail disassembly.
Pre-positioned bosses, slots and holes remove pressure from critical function surfaces while pins are driven in and out. Thumb Safety and Magazine disconnect drop into holes and slots to prevent damage no matter what position they are in. High Density Polymer construction prevents marring of the frame while driving pins in and out. Retaining slots on each side of the block hold the striker making removal and installation of the striker spring a breeze. One side is for the 45 striker and the other is for the 9/40/357 striker. Moveable bosses are easily adjustable to position frames quickly and easily. Raised walls on each side of the block position the trigger bar within the trigger to easy trigger swapping. Apex logo and contact information cast directly into the body of the block for easy identification and access to Apex’s tech support staff. The Armorer's Tooling Plate is designed to attach directly to the underside of the Apex Polymer Armorer's Block, providing a raised surface for you to work on your M&P and Glock Pistols.  The tooling plate has snap locks and slots to hold the 1/8" custom roll pin punch and 1/16" allen wrench.  Rubber feet grip the work surface, allowing for a sturdy hold while working.  a ring magnet on the underside of the plate will prevent magnetic parts from escaping.

SPECS: 7” Long x 4” Wide x 1.5” Tall.

64.9 74.9 2 CHF
Artikel-Nr.: 100011660
APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK
Herstellerproduktnummer: 104-001 856008005284 Vorpositionierte Vorsprünge, Schlitze und Löcher leiten den Druck von kritischen Funktionsoberflächen ab, während die Stifte ein- und ausgefahren werden. Daumensicherheit und Magazin lösen das Fallenlassen in Löcher und Schlitze, um Beschädigungen zu vermeiden, egal in welcher Position sie sich befinden. Die Konstruktion aus hochdichtem Polymer verhindert, dass der Rahmen beschädigt wird, während Stifte ein- und ausgefahren werden. Halteschlitze an jeder Seite des Blocks halten den Schlagbolzen fest, sodass das Entfernen und Installieren der Schlagfeder ein Kinderspiel wird. Eine Seite ist für den Stürmer 45 und die andere für den Stürmer 9/40/357. Bewegliche Vorsprünge sind leicht einstellbar, um Rahmen schnell und einfach zu positionieren. Erhöhte Wände auf jeder Seite des Blocks positionieren die Abzugstange im Abzug, um ein einfaches Auswechseln des Abzugs zu ermöglichen. Das Apex-Logo und die Kontaktinformationen werden direkt in den Blockkörper eingegossen, sodass die Mitarbeiter des technischen Supports von Apex leicht identifiziert und darauf zugreifen können. Die Armorer's Tooling Plate kann direkt an der Unterseite des Apex Polymer Armorer's Block angebracht werden und bietet eine erhöhte Oberfläche für die Bearbeitung Ihrer M & P- und Glock-Pistolen. Die Werkzeugplatte verfügt über Schnappverschlüsse und Schlitze für den 1/8 "Custom Roll Pin Punch und den 1/16" Inbusschlüssel. Gummifüsse greifen die Arbeitsfläche und sorgen für einen stabilen Halt beim Arbeiten. Ein Ringmagnet an der Unterseite der Platte verhindert, dass magnetische Teile austreten.
74.9 CHF 0 CHF 74.90 *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften:

Eigenschaften

Versandgewicht: 0.091kg Versandhöhe: 43mm Versandbreite: 132mm Versandlänge: 206mm

Artikeldetails

Made in USA



Artikel-Nr.: 100014075
APEX TACTICAL SPECIALTIES INC ARMORER'S BLOCK TOOLING PLATE
Herstellerproduktnummer: 104-110 856008005291 Vorpositionierte Vorsprünge, Schlitze und Löcher leiten den Druck von kritischen Funktionsoberflächen ab, während die Stifte ein- und ausgefahren werden. Daumensicherheit und Magazin lösen das Fallenlassen in Löcher und Schlitze, um Beschädigungen zu vermeiden, egal in welcher Position sie sich befinden. Die Konstruktion aus hochdichtem Polymer verhindert, dass der Rahmen beschädigt wird, während Stifte ein- und ausgefahren werden. Halteschlitze an jeder Seite des Blocks halten den Schlagbolzen fest, sodass das Entfernen und Installieren der Schlagfeder ein Kinderspiel wird. Eine Seite ist für den Stürmer 45 und die andere für den Stürmer 9/40/357. Bewegliche Vorsprünge sind leicht einstellbar, um Rahmen schnell und einfach zu positionieren. Erhöhte Wände auf jeder Seite des Blocks positionieren die Abzugstange im Abzug, um ein einfaches Auswechseln des Abzugs zu ermöglichen. Das Apex-Logo und die Kontaktinformationen werden direkt in den Blockkörper eingegossen, sodass die Mitarbeiter des technischen Supports von Apex leicht identifiziert und darauf zugreifen können. Die Armorer's Tooling Plate kann direkt an der Unterseite des Apex Polymer Armorer's Block angebracht werden und bietet eine erhöhte Oberfläche für die Bearbeitung Ihrer M & P- und Glock-Pistolen. Die Werkzeugplatte verfügt über Schnappverschlüsse und Schlitze für den 1/8 "Custom Roll Pin Punch und den 1/16" Inbusschlüssel. Gummifüsse greifen die Arbeitsfläche und sorgen für einen stabilen Halt beim Arbeiten. Ein Ringmagnet an der Unterseite der Platte verhindert, dass magnetische Teile austreten.
64.9 CHF 15 CHF 64.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Hersteller/Modell: Glock, Smith & Wesson Modell: M&P, Universal Handguns

Eigenschaften

Versandgewicht: 0.204kg Versandhöhe: 40mm Versandbreite: 120mm Versandlänge: 196mm

Artikeldetails

Made in USA


Supports a polymer frame pistol for armory work and detail disassembly.
Pre-positioned bosses, slots and holes remove pressure from critical function surfaces while pins are driven in and out. Thumb Safety and Magazine disconnect drop into holes and slots to prevent damage no matter what position they are in. High Density Polymer construction prevents marring of the frame while driving pins in and out. Retaining slots on each side of the block hold the striker making removal and installation of the striker spring a breeze. One side is for the 45 striker and the other is for the 9/40/357 striker. Moveable bosses are easily adjustable to position frames quickly and easily. Raised walls on each side of the block position the trigger bar within the trigger to easy trigger swapping. Apex logo and contact information cast directly into the body of the block for easy identification and access to Apex’s tech support staff. The Armorer's Tooling Plate is designed to attach directly to the underside of the Apex Polymer Armorer's Block, providing a raised surface for you to work on your M&P and Glock Pistols.  The tooling plate has snap locks and slots to hold the 1/8" custom roll pin punch and 1/16" allen wrench.  Rubber feet grip the work surface, allowing for a sturdy hold while working.  a ring magnet on the underside of the plate will prevent magnetic parts from escaping.

SPECS: 7” Long x 4” Wide x 1.5” Tall.

Newsletter