Ihr Warenkorb ist leer.

Warenkorb

N.C. ORDNANCE
REPRODUCTION "EXOTIC" REVOLVER GRIPS

100005014

Simulated Stag, Jigged Bone & Ivory Give Your Wheelgun An Authentic Period Look

Elegant-looking reproductions of exotic grips for single-action revolvers look and feel like the hard-wearing stag antlers, jigged bone, or ivory used to customize original Old West sixguns. Produced by the same proprietary resin molding process N.C. Ordnance uses on all its reproduction grips for a solid feel and attractive finish.

Mehr...

Simulierter Hirsch, Jigged Bone und Elfenbein verleihen Ihrer Wheelgun ein authentisches Aussehen

Elegant aussehende Reproduktionen von exotischen Griffen für Single-Action-Revolver sehen aus und fühlen sich an wie die strapazierfähigen Hirschgeweihe, Jigged Bones oder Elfenbein, mit denen die originalen Old West Sixguns angepasst werden. Hergestellt nach dem gleichen firmeneigenen Harzformverfahren. N.C. Ordnance verwendet alle seine Reproduktionsgriffe für eine solide Haptik und ein attraktives Finish.

SPEZIFIKATIONEN: Geformtes Polyurethanharz, in simuliertem Hirsch, Elfenbein oder Jigged Bone (JB). Kleinere Anpassungen können erforderlich sein. Colt SAA Ivory enthält ein Goldmedaillon. Ruger Vaquero passt auch zu Blackhawk und Single Six. Ruger Old Model passt für Blackhawk-Rahmen mit drei Schrauben. Ruger Vaquero Stag Like Grips für XR3 Red Vacqueros von 1972 bis 2004. Pietta Remington 1858 für Pietta mfg. Nur Klone.

Mehr...

Kundenbewertungen zu N.C. ORDNANCE UBERTI MODEL P GRIPS, IVORY

Anzahl der Bewertungen: 24
Von brownells.com: 24
Durchschnittliche Bewertung: 2.5

S47 Ruger Vaquero Grips (14.01.2014)

I purchased these for my Ruger 41c. Blackhawk. With a slight bit of adjusting they fit perfectly. I do believe that the listed description is misleading though. It says the grips are for the Vaquero. Nowhere does it say they will fit the Blackhawk. Please address this. Gun enthusiasts who are not in the know would be confused.

LOOKS GOOD BUT NO CIGAR (26.06.2011)

BOUGHT THESE GRIPS FOR AN XR-3 VAQUERO. THEY FIT AT AN ANGLE AND LOOK LIKE IT TOO. YOU WOULD HAVE TO USE A LOT OF EPOXY TO FILL IN THE GAPS SO THEY WOULD BE SQUARE TO YOUR FRAME.

Would not buy any of their products (25.12.2013)

Bought first pair right grip didn't fit frame. Bought second pair didn't fit frame so returned them and tried a third pair. Tried to fit to the Vaquero myself; too far off couldn't make them fit. Poor quality control. Wouldn't recommend at all with three tries of the same product.

Very good grip panel (22.01.2017)

Great vintage stile grip. Quality is very good . Fit well , but wider than walnut. Replaced trigger springs as well. Smooth, looks, good. Hard to find, I am pleased. Other review not fair to mfg. Or Brownells.

Checkered grips (25.03.2017)

Good price. Nice very fine checkering on grip. Biggest complaint is that the inside of grip is flat (no inner platform to keep grips from shifting if they loosen up). Does need some minor fitting. Would be more prone to recommend other grips I have/use to friends

Good Quality (02.10.2017)

Apparently, Pietta changed the size of the frame on the 58 NA .44. Mine was made in 1977 and the grips are smaller than the OEM replacement grips made now, by at least 15%. So major fitting is required if you own an older model. Mine is a 1858 Stainless Steel New Army .44 with 8" barrel model year 1977 [AC].

<img width="500" src='/userdocs/reviewimages/193e02f4-13c8-4e0a-8e9e-53181575b2cc.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/2142595e-7108-4ec1-88cf-5dbee30b9d51.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/54828e73-5541-43fd-8cb9-a9738455c637.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/594122bb-a181-4a91-8c9e-a952b5e421c8.jpg' alt=''>

Very Nice (03.11.2017)

Iâve found that the grips needed a little reworking. A little fine sandpaper and smooth the rough edges.

The grips inside are flat and as mentioned before they tend to âslipâ . For me it was an easy fix with the sharp end of some picture frame screws Iâve made pins on the inside that work great. And yes they hold very steady.

The grips were ordered on a Monday and I got them by Friday. Very quick delivery compared to order summary.

<img width="500" src='/userdocs/reviewimages/522cf257-8b34-4265-8173-9a375f64b159.jpg' alt=''>

"New Vaquero" Grips (Poor Quality & Fit) (04.11.2010)

The price and Stag look of these grips are what sold me. However, the fit is terrible on them. I truly wish that I would have just sent them back but, after 3 hours of filing the edges and filling the locating holes with epoxy and re-drilling them to optimize the fit, I was determined to get them to fit only to find out that the mounting screw holes didn't match up either and the screw that they give you is not long enough to even work. Porous holes in grips wavy edges & back mounting surfaces with defects and dents on edges. One Star is to much for these but it's the min. Sorry

Not so good,,, (12.02.2016)

When I was fitting them they smelled like solvent or paint thinner,,and they are soft,very soft,wasn't cured maybe? will not tighten up on the gun,,screw tries to pull though . you can push it back though ,,,like they are made of gummy bears,,, Horrible ..

Not as good as I expected (05.05.2014)

The fit of these grips on the Pietta 1858 Remington was less than good. At the top, both grip panels are a good 3/16th's short and don't reach the top of the frame. Behind the trigger guard, at the top they were too long and further down a 16th too narrow, exposing the frame and the back strap were too wide. I thought maybe the indexing pin hole was a little off, not the case. The grip screw had to be shortened 1/16th to keep from gouging my hand.

not even a matched set (12.07.2014)

The two sides of the grip didn't even match. One was a quarter inch longer than the other, so they clearly were made wrong. Even worse, the only one close to the right size didn't match the frame at all, so hoping that another set would match was worthless. These got sent back.

inexpensive improvement (02.11.2014)

i've installed a number of these on my pietta '58s, and they look great. they take some fitting, but the price is right!

DO NOT BUY (18.04.2017)

If there was a "0 star" I would have given it. These grips don't even come close to fitting. One side didn't even have the hole drilled for the pin. The worst part....I had to pay to send them back!!!

Uberti Model P grips (25.03.2017)

Great value for the price. Good looking grips, Easy to install, ridge on interior side of grip panels help prevent the grip from slipping if it loosens up. Would buy again.

Great Deal (16.01.2014)

This is my second ordering from Brownell and I am completely satisfied. This order was for the Colt STAG hand grips for my Colt Army SSA and will make it look really nice.
Thanks a lot,
Bruce TX

Somewhat Pleased (03.03.2016)

They look great on my Colt 1873 SAA 7 1/2" 3rd generation but like all of these types of grips they do not fit as good as the should. The packed they came in said 1st generation so that could the reason why. Another thing is while trying to tighten them so they would not shift back and forth, the retainer in the right side of the grip was pulled through and I had to use a light coating of Gorilla Glue in the hole before using a dowel rod to force it back in from the outside of the right grip. I hope others do not experience this problem.

Poor fit (21.06.2016)

Front of grip is does not match Colt SAA frame. leaves frame exposed. No amount of fitting would make this grip fit properly ... not thick enough.

Don't buy for New Vaquero (11.09.2010)

The sepc says these fit new small frame Vaqueros made in 2005 and later. They do not. They fit old large frame Vaqueros. Quality is poor as well

Don't get confused (11.03.2011)

Confused. Could not distinguish that these grips will not fit the new vaquero. Add needs to be more specific. They are cheap and they look cheap.

Really Awful (23.03.2011)

Really awful quality, not up to Brownell's usual standards. Stay away.

Poor Quality (25.10.2016)

Very poor quality of resin. The right panel was warped and no hardware installed in the grip to install a screw . I thought about truing them up , but the material is of very poor quality and decided to send them back , keep in mind this is the only thing I have ever returned to Brownells .

Okay but alittle soft (21.01.2011)

Okay but alittle soft. Be careful how much you tighten

Ruger Bisley Grip Evaluation (03.11.2017)

Gun: New Model Blackhawk 45 LC

Appearance: Much to my liking - Fan of old Westerns

Fit: Perfect - No Modification

Feel: Excellent - I like the way it feels in my med-large hands

NOTE: Followed wise screw installation advice. Appreciated enclosed historical notes on grips. No Cons.

"Minimal work for fitting well" (16.03.2012)

The Grips come perfectly groved for a Ruger Super Black Hawk. I fitted this grips on a United Sporting Arms "Seville" cal.357 I Bought in 1974, because of the oversize grips. The groves were naturally in the wrong place, but with some minor measurements of the groves on each side and pin hole. I was able, in about 20 minutes file the new grips groves, shift the pin hole to conclude with a perfect fit. The only aspect of the Stag Grips, that concerned me was that the carvings of the stags were to big and to deep in the grips. Everything else was ideal. "They Look Great".

Lesen Sie 24 weitere Bewertungen bei brownells.com

59.9 69.9 4 CHF

Artikel-Nr.: 100005014
N.C. ORDNANCE UBERTI MODEL P GRIPS, IVORY
Herstellerproduktnummer: C130 Elegant aussehende Reproduktionen von exotischen Griffen für Single-Action-Revolver sehen aus und fühlen sich an wie die strapazierfähigen Hirschgeweihe, Jigged Bones oder Elfenbein, mit denen die originalen Old West Sixguns angepasst werden. Hergestellt nach dem gleichen firmeneigenen Harzformverfahren. N.C. Ordnance verwendet alle seine Reproduktionsgriffe für eine solide Haptik und ein attraktives Finish.

59.9 CHF 3 CHF 59.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Art: Square Farbe: Ivory Hersteller/Modell: Uberti Material: Polymer Modell: Universal Handguns Oberfläche: Smooth

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Square Farbe: Ivory Hersteller/Modell: Uberti Material: Polymer Modell: Universal Handguns Oberfläche: Smooth Versandgewicht: 0.113kg Versandhöhe: 38mm Versandbreite: 56mm Versandlänge: 91mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1

Artikel-Nr.: 100005015
N.C. ORDNANCE RUGER® VAQUERO® XR3- RED IVORY/SMOOTH GRIPS
Herstellerproduktnummer: C50 Elegant aussehende Reproduktionen von exotischen Griffen für Single-Action-Revolver sehen aus und fühlen sich an wie die strapazierfähigen Hirschgeweihe, Jigged Bones oder Elfenbein, mit denen die originalen Old West Sixguns angepasst werden. Hergestellt nach dem gleichen firmeneigenen Harzformverfahren. N.C. Ordnance verwendet alle seine Reproduktionsgriffe für eine solide Haptik und ein attraktives Finish.

60.93 CHF 4 CHF 60.93 *

Lieferzeit ca. 2-4 Tage aus dem lokalen Lager.

Eigenschaften: Art: Square Farbe: Ivory Hersteller/Modell: Ruger Material: Polymer Modell: New Vaquero Oberfläche: Smooth

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Square Farbe: Ivory Hersteller/Modell: Ruger Material: Polymer Modell: New Vaquero Oberfläche: Smooth Versandgewicht: 0.091kg Versandhöhe: 25mm Versandbreite: 71mm Versandlänge: 140mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1

Artikel-Nr.: 100005905
N.C. ORDNANCE RUGER® NEW MODEL XR3- RED FRAME GRIPS
Herstellerproduktnummer: J50 Elegant aussehende Reproduktionen von exotischen Griffen für Single-Action-Revolver sehen aus und fühlen sich an wie die strapazierfähigen Hirschgeweihe, Jigged Bones oder Elfenbein, mit denen die originalen Old West Sixguns angepasst werden. Hergestellt nach dem gleichen firmeneigenen Harzformverfahren. N.C. Ordnance verwendet alle seine Reproduktionsgriffe für eine solide Haptik und ein attraktives Finish.

69.9 CHF 1 CHF 69.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Art: Exotic, Reproduction Farbe: Bone Hersteller/Modell: Ruger Material: Polymer Modell: Vaquero Oberfläche: Textured

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Exotic,Reproduction Farbe: Bone Hersteller/Modell: Ruger Material: Polymer Modell: Vaquero Oberfläche: Textured Versandgewicht: 0.068kg Versandhöhe: 5mm Versandbreite: 61mm Versandlänge: 142mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1

Artikel-Nr.: 100005906
N.C. ORDNANCE RUGER® VAQUERO®, STAG GRIPS
Herstellerproduktnummer: S150 Elegant aussehende Reproduktionen von exotischen Griffen für Single-Action-Revolver sehen aus und fühlen sich an wie die strapazierfähigen Hirschgeweihe, Jigged Bones oder Elfenbein, mit denen die originalen Old West Sixguns angepasst werden. Hergestellt nach dem gleichen firmeneigenen Harzformverfahren. N.C. Ordnance verwendet alle seine Reproduktionsgriffe für eine solide Haptik und ein attraktives Finish.

69.9 CHF 4 CHF 69.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Art: Exotic, Reproduction Farbe: Stag Hersteller/Modell: Ruger Material: Polymer Modell: Vaquero Oberfläche: Textured

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Exotic,Reproduction Farbe: Stag Hersteller/Modell: Ruger Material: Polymer Modell: Vaquero Oberfläche: Textured Versandgewicht: 0.068kg Versandhöhe: 13mm Versandbreite: 69mm Versandlänge: 145mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1

Simulated Stag, Jigged Bone & Ivory Give Your Wheelgun An Authentic Period Look

Mehr...

Simulierter Hirsch, Jigged Bone und Elfenbein verleihen Ihrer Wheelgun ein authentisches Aussehen

Mehr...

Kundenbewertungen zu N.C. ORDNANCE UBERTI MODEL P GRIPS, IVORY

Anzahl der Bewertungen: 24
Von brownells.com: 24
Durchschnittliche Bewertung: 2.5

S47 Ruger Vaquero Grips (14.01.2014)

LOOKS GOOD BUT NO CIGAR (26.06.2011)

BOUGHT THESE GRIPS FOR AN XR-3 VAQUERO. THEY FIT AT AN ANGLE AND LOOK LIKE IT TOO. YOU WOULD HAVE TO USE A LOT OF EPOXY TO FILL IN THE GAPS SO THEY WOULD BE SQUARE TO YOUR FRAME.

Would not buy any of their products (25.12.2013)

Very good grip panel (22.01.2017)

Checkered grips (25.03.2017)

Good Quality (02.10.2017)

Very Nice (03.11.2017)

"New Vaquero" Grips (Poor Quality & Fit) (04.11.2010)

Not so good,,, (12.02.2016)

Not as good as I expected (05.05.2014)

not even a matched set (12.07.2014)

inexpensive improvement (02.11.2014)

i've installed a number of these on my pietta '58s, and they look great. they take some fitting, but the price is right!

DO NOT BUY (18.04.2017)

Uberti Model P grips (25.03.2017)

Great value for the price. Good looking grips, Easy to install, ridge on interior side of grip panels help prevent the grip from slipping if it loosens up. Would buy again.

Great Deal (16.01.2014)

This is my second ordering from Brownell and I am completely satisfied. This order was for the Colt STAG hand grips for my Colt Army SSA and will make it look really nice.
Thanks a lot,
Bruce TX

Somewhat Pleased (03.03.2016)

Poor fit (21.06.2016)

Front of grip is does not match Colt SAA frame. leaves frame exposed. No amount of fitting would make this grip fit properly ... not thick enough.

Don't buy for New Vaquero (11.09.2010)

The sepc says these fit new small frame Vaqueros made in 2005 and later. They do not. They fit old large frame Vaqueros. Quality is poor as well

Don't get confused (11.03.2011)

Confused. Could not distinguish that these grips will not fit the new vaquero. Add needs to be more specific. They are cheap and they look cheap.

Really Awful (23.03.2011)

Really awful quality, not up to Brownell's usual standards. Stay away.

Poor Quality (25.10.2016)

Okay but alittle soft (21.01.2011)

Okay but alittle soft. Be careful how much you tighten

Ruger Bisley Grip Evaluation (03.11.2017)

"Minimal work for fitting well" (16.03.2012)

Lesen Sie 24 weitere Bewertungen bei brownells.com

Kunden kauften auch

RCBS 0.355" BULLET SIZING DIE
LUBE-A-MATIC-2 LUBE AND SIZER DIES

RCBS

Nicht verfügbar

CHF 49.90 *

Fett- und Kalibriermatrizen

POWER CUSTOM "N" FRAME HAND
S&W COMPETITION HAND

POWER CUSTOM

Auf Lager

CHF 54.90 *

Transportklinken

LEE PRECISION 22 CALIBER (0.225") 55GR FLAT NOSE DOUBLE CAVITY MOLD
2 CAVITY RIFLE BULLET MOLDS

LEE PRECISION

Auf Lager

CHF 54.90 * CHF 39.90 - CHF 64.90*

Giesskokillen für Langwaffen | Giesskokillen für Kurzwaffen

LEE PRECISION 45 CALIBER (0.452") 230GR TC 6-CAVITY MOLD
6 CAVITY HANDGUN MOULDS

LEE PRECISION

Auf Lager

CHF 74.90 * CHF 69.90 - CHF 79.90*

Giesskokillen für Kurzwaffen | Giesskokillen für Langwaffen

Sale

PRO MAG M&P 9 9MM, 17RD
S&W 9MM MAGAZINES

PRO MAG

Auf Lager

CHF 32.62 *

Alter Preis CHF 39.90

Magazine

Anmeldung

Kennwort vergessen?
Registrieren

SOCIAL MEDIA

Facebook

BROWNELLS.CH

PRODUKTKATEGORIEN

BESTELLEN

Kundenservice

Willkommen!

Willkommen bei brownells.ch, dem führenden Händler von Waffenteilen, Zubehör, Accessoires und Werkzeugen für Waffen in der Svizzera!

Unsere Serviceleistungen

Wenn Sie Schiessen und das Arbeiten mit Waffen mögen, ganz gleich ob als Hobby oder beruflich oder einfach nur ein Waffenbesitzer sind, bei uns sind Sie richtig!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Bastler, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertige Waffenteilen und dem Zubehör von Brownells Svizzera. Sie finden bei uns mehr als 50.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchensenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Aufrüstung Ihrer Waffen.