Clamps to factory ring cuts; keeps mounting height low and over the receiver. Lots of slots for Weaver-style rings. 77/22® fits .22 LR and .22 Magnum with no modifications to rifle. 77/44® also fits 77/22®, .22 Hornet.
SPECS: Aluminum, matte finish, black or silver. 5" (12.7cm) long. .495" high RUGER 77/22 Scope Mounts RUGER 77/17 , .22 Rimfire, .22 Magnum, .17 HMR.
Altro...
Aumenti montaggio opzioni su 77/22 & 77/44
Morsetti ad anello fabbrica tagli; mantiene altezza bassa e sopra il ricevitore di montaggio. Ci sono un sacco di slot per anelli Weaver-stile. 77/22 ® si inserisce. 22 LR e. 22 Magnum senza modifiche al fucile. 77/44 ® si inserisce anche 77/22 ®,. 22 Hornet.
Specifiche: in alluminio, finitura opaca, nero o argento. 5"(12,7 cm) Long.. 495" alta RUGER ® 77/22 ® ® Scope Mounts RUGER 77/17 ®,. 22 Rimfire,. 22 Magnum,. 17 HMR.
Altro...
Punteggi dei clienti per WEIGAND COMBAT 77/22, SILVER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
absolutely fantastic, fits perfect(12.09.2011)
It's just a good solid fit and does not interfer with ajecting the spent shells or the action of the bolt ...... regards Ken
WORTH THE WAIT(19.06.2010)
As a long time Ruger 77/22 user, got one of the first ones ever shipped to Australia, I was looking for a rifle to mount a newly aquired EOTECH sight to and my other firearms did not have a picatiny rail and the first place I turned to was Bownells and I found a new product to suit, the Weigand scope mount. So once it arrived the were not problems with mounting the rail,very straight forward and the EOTECH mated straight on with no problems apart from a little shimming under the front of the sight. Great product. Can you make one for the SSG69 and one for the SAKO 579?
Very good base mount(26.02.2012)
This is a good mount for the Ruger 77/357 and Ruger 77/44. I'd like to see was a better method for indexing the base to the receiver. Forward and back indexing is accomplished with a roll pin, laterally there is really no way to center the base on the receiver, other than carefully adjusting the mounting screws in or out. The rear of the base could be a bit longer to accomodate the Weaver style rings. A weaver ring will overhang the back of the base by about an eighth of an inch.
N. prodotto: 957000047 WEIGAND COMBAT 77/22, SILVER Parti Fabbricante: 7722PS Morsetti ad anello fabbrica tagli; mantiene altezza bassa e sopra il ricevitore di montaggio. Ci sono un sacco di slot per anelli Weaver-stile. 77/22 ® si inserisce. 22 LR e. 22 Magnum senza modifiche al fucile. 77/44 ® si inserisce anche 77/22 ®,. 22 Hornet.
89.9CHF5CHF 89.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RugerColore: SilverMateriale: AlluminioModello: 77/22Numero di basi: 1 pezzoTipo: Basi stile Weaver
Adatto per:
Ruger
Colore:
Silver
Materiale:
Alluminio
Modello:
77/22
Numero di basi:
1 pezzo
Tipo:
Basi stile Weaver
Peso della spedizione: 0.091kgAltezza di spedizione: 15mmLarghezza di spedizione: 89mmLunghezza di spedizione: 175mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 957000056 WEIGAND COMBAT 77/44®, BLACK Parti Fabbricante: 7744B Morsetti ad anello fabbrica tagli; mantiene altezza bassa e sopra il ricevitore di montaggio. Ci sono un sacco di slot per anelli Weaver-stile. 77/22 ® si inserisce. 22 LR e. 22 Magnum senza modifiche al fucile. 77/44 ® si inserisce anche 77/22 ®,. 22 Hornet.
74.9CHF13CHF 74.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RugerColore: BlackMateriale: AlluminioModello: 77/44Numero di basi: 1 pezzoTipo: Basi stile Weaver
Clamps to factory ring cuts; keeps mounting height low and over the receiver. Lots of slots for Weaver-style rings. 77/22® fits .22 LR and .22 Magnum with no modifications to rifle. 77/44® also fits 77/22®, .22 Hornet.
SPECS: Aluminum, matte finish, black or silver. 5" (12.7cm) long. .495" high RUGER 77/22 Scope Mounts RUGER 77/17 , .22 Rimfire, .22 Magnum, .17 HMR.
Altro...
Aumenti montaggio opzioni su 77/22 & 77/44
Morsetti ad anello fabbrica tagli; mantiene altezza bassa e sopra il ricevitore di montaggio. Ci sono un sacco di slot per anelli Weaver-stile. 77/22 ® si inserisce. 22 LR e. 22 Magnum senza modifiche al fucile. 77/44 ® si inserisce anche 77/22 ®,. 22 Hornet.
Specifiche: in alluminio, finitura opaca, nero o argento. 5"(12,7 cm) Long.. 495" alta RUGER ® 77/22 ® ® Scope Mounts RUGER 77/17 ®,. 22 Rimfire,. 22 Magnum,. 17 HMR.
Altro...
Punteggi dei clienti per WEIGAND COMBAT 77/22, SILVER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
absolutely fantastic, fits perfect(12.09.2011)
It's just a good solid fit and does not interfer with ajecting the spent shells or the action of the bolt ...... regards Ken
WORTH THE WAIT(19.06.2010)
As a long time Ruger 77/22 user, got one of the first ones ever shipped to Australia, I was looking for a rifle to mount a newly aquired EOTECH sight to and my other firearms did not have a picatiny rail and the first place I turned to was Bownells and I found a new product to suit, the Weigand scope mount. So once it arrived the were not problems with mounting the rail,very straight forward and the EOTECH mated straight on with no problems apart from a little shimming under the front of the sight. Great product. Can you make one for the SSG69 and one for the SAKO 579?
Very good base mount(26.02.2012)
This is a good mount for the Ruger 77/357 and Ruger 77/44. I'd like to see was a better method for indexing the base to the receiver. Forward and back indexing is accomplished with a roll pin, laterally there is really no way to center the base on the receiver, other than carefully adjusting the mounting screws in or out. The rear of the base could be a bit longer to accomodate the Weaver style rings. A weaver ring will overhang the back of the base by about an eighth of an inch.