This Push Thru die is designed to completely eliminate bulges near the case base, common in 40 S&W brass. By passing the case completely through the dies, the bulge is removed and the brass may be returned to service. The GRX die is currently only available for 40 S&W.
Altro...
Questo stampo Push Thru è progettato per eliminare completamente i rigonfiamenti vicino alla base caso, comune in ottone S & W 40. Passando il caso completamente attraverso la muore, viene rimosso il rigonfiamento e l'ottone può essere restituito al servizio. Il die GRX è attualmente disponibile solo per 40 S & W.
Altro...
Punteggi dei clienti per REDDING GRX PUSH THRU BASE SIZING DIE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Get the Glock BULDGE out of your brass(29.03.2011)
This die is easy and simple to use, I averaged about 300 rounds per hour on an RCBS Partner press. I would recommend this die to anyone who is a competition shooter for their 40 brass. I shoot IPSC with a Springfield XD 40 and when it jams from a Glock bulged brass I have to use a corner of something to rack the slide, you can't do it by hand this die prevents this from happening.
Does what is is supposed to do. Highly(23.10.2011)
I would highly recommend getting the optional bottle to catch the cases when they come out the top.
SAVED A LOT OF BRASS(20.01.2016)
does exactly what it was intended had brass that had been fired in Glock regular barrel, had after market barrel was tigher tolerances loaded rounds would not chamber properly. after running them through this die worked perfect.
N. prodotto: 749004863 REDDING GRX PUSH THRU BASE SIZING DIE Parti Fabbricante: 96040611760960406 Questo stampo Push Thru è progettato per eliminare completamente i rigonfiamenti vicino alla base caso, comune in ottone S & W 40. Passando il caso completamente attraverso la muore, viene rimosso il rigonfiamento e l'ottone può essere restituito al servizio. Il die GRX è attualmente disponibile solo per 40 S & W.
84.9CHF3CHF 84.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Cartuccia: 40 S&WMatrice tipo: Sizing Dies
Cartuccia:
40 S&W
Matrice tipo:
Sizing Dies
Peso della spedizione: 0.159kgAltezza di spedizione: 38mmLarghezza di spedizione: 58mmLunghezza di spedizione: 132mm
This Push Thru die is designed to completely eliminate bulges near the case base, common in 40 S&W brass. By passing the case completely through the dies, the bulge is removed and the brass may be returned to service. The GRX die is currently only available for 40 S&W.
Altro...
Questo stampo Push Thru è progettato per eliminare completamente i rigonfiamenti vicino alla base caso, comune in ottone S & W 40. Passando il caso completamente attraverso la muore, viene rimosso il rigonfiamento e l'ottone può essere restituito al servizio. Il die GRX è attualmente disponibile solo per 40 S & W.
Altro...
Punteggi dei clienti per REDDING GRX PUSH THRU BASE SIZING DIE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Get the Glock BULDGE out of your brass(29.03.2011)
This die is easy and simple to use, I averaged about 300 rounds per hour on an RCBS Partner press. I would recommend this die to anyone who is a competition shooter for their 40 brass. I shoot IPSC with a Springfield XD 40 and when it jams from a Glock bulged brass I have to use a corner of something to rack the slide, you can't do it by hand this die prevents this from happening.
Does what is is supposed to do. Highly(23.10.2011)
I would highly recommend getting the optional bottle to catch the cases when they come out the top.
SAVED A LOT OF BRASS(20.01.2016)
does exactly what it was intended had brass that had been fired in Glock regular barrel, had after market barrel was tigher tolerances loaded rounds would not chamber properly. after running them through this die worked perfect.