Il Carrello è vuoto.

Carrello

0917309915

JOHN MASEN
SEMI-AUTO RIFLE RECOIL PAD

560153808

Extra-Length Plus No-Slip Surface

Increases stock length to better fit shooters with long arms. Provides a cushioned, recoil absorbing, non-slip surface. Replaces original pad with no permanent alterations. AR-15/M16 model fits A-1 and A-2 trap door buttstocks; adds ¾" length. CAR-15 model fits collapsible stock; adds ¾". M14/M1A adds 7/8". Ruger® model fits 10/22®, Mini-Thirty®, Model 96™, does not fit Mini-14 with serial numbers begining at 580 and higher.

SPECS: Polyethylene rubber, black. Serrated face.

Altro...

Superficie extra-lunghezza più antiscivolo

Aumenta la lunghezza del calcio per adattarsi meglio tiratori con armi lunghe. Fornisce un rinculo ammortizzato, assorbente, superficie antiscivolo. Sostituisce pad originale senza le alterazioni permanenti. Modello AR-15/M16 si adatta buttstocks botola a-1 e a-2; aggiunge lunghezza ¾". CAR-15 modello si adatta collapsible stock; aggiunge ¾". M14/M1A aggiunge 7/8". Ruger® modello si inserisce 10/22®, Mini-Thirty®, Model 96™, non si adatta il Mini-14 con numeri di serie, cominciando a 580 e superiori.

Specifiche: gomma polietilene nera. Seghettato faccia.

Altro...

Punteggi dei clienti per JOHN MASEN M14/M1A RECOIL PAD

Numero di punteggi: 14
Da brownells.com: 14
Punteggio medio: 2

This is a GOOD product (28.05.2010)

I had to do a little fitting (I expected that)
and I love it!

waste of money (03.07.2012)

No matter how much trimming and filling I did this thing would not fit well on my USGI stock. Ended up in the garbage.

Ruger Mini-14 Pad Does Not Fit Model 580 (21.07.2010)

It was a very nice looking pad, but it does not fit my Ruger Mini 14 Model 580 Ranch Rifle.

10-22 and model 96 recoil pad (20.08.2010)

I have had one of these on my 10-22 for a few years, i recently purchased a Model 96 in 44mag, the fit up on both guns is excelent, especially for a long armed person like me.

Adds Length of Pull (19.10.2011)

Dense rubber does add in some recoil absorption. I bought this pad to increase my length of pull and to remove the uncomfortable factory hard plastic plate. The pad gives good grip to the shoulder without being overly gripping and grabbing clothing during carry.
The pad is oversized for the 10/22, and will need to be ground down on the sides to fit flush. I like the extra material, so I did not do this step. Otherwise the pad is fitted very well to the 10/22 and attaches securely.

It fit my needs perfectly. But I gave 4 stars for the possible trimming some will want to do.

It's an extention, not a true recoil pad (23.01.2012)

This was installed on a Ruger 99/44 Deerfield .44 Mag carbine.

Let's get right to the biggest wart about this product... as others have said, it is NOT a soft recoil dampening pad like a Pachmayr, it is hard rubber with hardly (if any) any give.

It does a great job in adding length to the "shorty" Ruger carbine stocks, but it should be called/listed as a stock extension instead, and lose the "cushioned, recoil absorbing" claim from the product description.

Tip for installation, attach the top "leg" first, get it aligned with the screw hole and tighten down the screw.

Then you can pull and stretch the pad around and down the back of the stock to get the bottom screw to line up with the existing hole. If you do the bottom first, getting the top leg to fit properly is too difficult.

The pad is a bit oversize and extends between 1/32 - 1/16" from the rest of the stock... others have chosen to leave it that way, I'm going to go through the exercise of fitting like any other after market pad.

Nonsense (27.08.2014)

This doesn't come anywhere close to actually fitting a Mini 30. Not even close. I can't understand how it would be difficult to make a pad that fit. Absolutely silly nonsense.

Old-school Solution, Rather 50% Of One (29.07.2018)

This is one of the original slip-on recoil pad designs. Note that it ONLY works with the flat-back CAR stock, not the angled "LE" style stock. That being said, it will generally slide right on and over. What this will NOT do is stay on properly. You'll want to route a ziptie through the sling loop and the middle of the stock to hold the pad on securely, or use copious amounts of adhesive.

If you want to add length of pull or tame the limb-destroying 'recoil' of a 5.56mm cartridge, this is a decent choice. I think a better stock would be my first upgrade, but for a 'retro' USASOC SMU build these are essential.

let down (13.08.2009)

stock screws pull through the pad ,too bad as is a good alt. for ar15 build project ,hope they can remedy problem

Worst product ever bought (28.08.2009)

Absolutely the worst product I have ever bought from Brownells. Top screw pulls through the rubber without ever tightening the buttstock to rifle. If sent to me free, I would not accept it given what I know now.
DO NOT BUY THIS!!!

Masen recoil pad (13.07.2010)

Same as everyone else top screw pulls through pad and it doesn't secure the A2 stock to the rifle. absolute junk, I wouldn't put it on an airsoft rifle.

Do not buy (06.12.2010)

Wish I had read the reviews before purchasing. Does not add .75 inches to stock, it is .75 thick, but the stock buttplate is .5 inches. So it would only add .25 inches. Also, as noted by other reviewers the screws pull through when tightened. Junk!

Very flawed design (14.02.2012)

Beware that the only thing holding your stock to the receiver will be this rubber butt pad. My customer bought this from me for his AR and after proper tightening the stock began twisting and this butt pad FELL OFF the rifle which in turn destroyed the rear take-down detent spring. Upon inspection the was a small, thin washer molded into the rubber that pulled out of the butt pad. I wouldn't trust this in the field or on the range.

JUNK PURE JUNK (19.03.2012)

Cant tighten this down because the screws pull through the rubber pad. This is junk! Dont waste your time or money.

Leggi più recensioni su brownells.com

28.9 35.9 4 CHF

N. prodotto: 560153808
JOHN MASEN M14/M1A RECOIL PAD
Parti Fabbricante: BW08 Aumenta la lunghezza del calcio per adattarsi meglio tiratori con armi lunghe. Fornisce un rinculo ammortizzato, assorbente, superficie antiscivolo. Sostituisce pad originale senza le alterazioni permanenti. Modello AR-15/M16 si adatta buttstocks botola a-1 e a-2; aggiunge lunghezza ¾". CAR-15 modello si adatta collapsible stock; aggiunge ¾". M14/M1A aggiunge 7/8". Ruger® modello si inserisce 10/22®, Mini-Thirty®, Model 96™, non si adatta il Mini-14 con numeri di serie, cominciando a 580 e superiori.

32.9 CHF 0 CHF 32.90 *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Colore: Black Materiale: Rubber Tipo: Standard

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Colore: Black Materiale: Rubber Tipo: Standard Peso della spedizione: 0.045kg Altezza di spedizione: 13mm Larghezza di spedizione: 56mm Lunghezza di spedizione: 135mm

Dettagli dell'elemento

Made in Usa

N. prodotto: 560153700
JOHN MASEN AR-15/M16 RECOIL PAD
Parti Fabbricante: 1537 Aumenta la lunghezza del calcio per adattarsi meglio tiratori con armi lunghe. Fornisce un rinculo ammortizzato, assorbente, superficie antiscivolo. Sostituisce pad originale senza le alterazioni permanenti. Modello AR-15/M16 si adatta buttstocks botola a-1 e a-2; aggiunge lunghezza ¾". CAR-15 modello si adatta collapsible stock; aggiunge ¾". M14/M1A aggiunge 7/8". Ruger® modello si inserisce 10/22®, Mini-Thirty®, Model 96™, non si adatta il Mini-14 con numeri di serie, cominciando a 580 e superiori.

29.9 CHF 9 CHF 29.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Colore: Black Materiale: Rubber Tipo: Standard

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 560153800
JOHN MASEN CAR-15 RECOIL PAD
Parti Fabbricante: BW1538 Aumenta la lunghezza del calcio per adattarsi meglio tiratori con armi lunghe. Fornisce un rinculo ammortizzato, assorbente, superficie antiscivolo. Sostituisce pad originale senza le alterazioni permanenti. Modello AR-15/M16 si adatta buttstocks botola a-1 e a-2; aggiunge lunghezza ¾". CAR-15 modello si adatta collapsible stock; aggiunge ¾". M14/M1A aggiunge 7/8". Ruger® modello si inserisce 10/22®, Mini-Thirty®, Model 96™, non si adatta il Mini-14 con numeri di serie, cominciando a 580 e superiori.

28.9 CHF 85 CHF 28.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Colore: Black Materiale: Rubber Tipo: Standard

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 560153807
JOHN MASEN RUGER RECOIL PAD
Parti Fabbricante: BW07 Aumenta la lunghezza del calcio per adattarsi meglio tiratori con armi lunghe. Fornisce un rinculo ammortizzato, assorbente, superficie antiscivolo. Sostituisce pad originale senza le alterazioni permanenti. Modello AR-15/M16 si adatta buttstocks botola a-1 e a-2; aggiunge lunghezza ¾". CAR-15 modello si adatta collapsible stock; aggiunge ¾". M14/M1A aggiunge 7/8". Ruger® modello si inserisce 10/22®, Mini-Thirty®, Model 96™, non si adatta il Mini-14 con numeri di serie, cominciando a 580 e superiori.

35.9 CHF 1 CHF 35.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Colore: Black Materiale: Rubber Tipo: Standard

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Extra-Length Plus No-Slip Surface

SPECS: Polyethylene rubber, black. Serrated face.

Altro...

Superficie extra-lunghezza più antiscivolo

Specifiche: gomma polietilene nera. Seghettato faccia.

Altro...

Punteggi dei clienti per JOHN MASEN M14/M1A RECOIL PAD

Numero di punteggi: 14
Da brownells.com: 14
Punteggio medio: 2

This is a GOOD product (28.05.2010)

I had to do a little fitting (I expected that)
and I love it!

waste of money (03.07.2012)

No matter how much trimming and filling I did this thing would not fit well on my USGI stock. Ended up in the garbage.

Ruger Mini-14 Pad Does Not Fit Model 580 (21.07.2010)

It was a very nice looking pad, but it does not fit my Ruger Mini 14 Model 580 Ranch Rifle.

10-22 and model 96 recoil pad (20.08.2010)

I have had one of these on my 10-22 for a few years, i recently purchased a Model 96 in 44mag, the fit up on both guns is excelent, especially for a long armed person like me.

Adds Length of Pull (19.10.2011)

It's an extention, not a true recoil pad (23.01.2012)

Nonsense (27.08.2014)

This doesn't come anywhere close to actually fitting a Mini 30. Not even close. I can't understand how it would be difficult to make a pad that fit. Absolutely silly nonsense.

Old-school Solution, Rather 50% Of One (29.07.2018)

let down (13.08.2009)

stock screws pull through the pad ,too bad as is a good alt. for ar15 build project ,hope they can remedy problem

Worst product ever bought (28.08.2009)

Masen recoil pad (13.07.2010)

Same as everyone else top screw pulls through pad and it doesn't secure the A2 stock to the rifle. absolute junk, I wouldn't put it on an airsoft rifle.

Do not buy (06.12.2010)

Very flawed design (14.02.2012)

JUNK PURE JUNK (19.03.2012)

Cant tighten this down because the screws pull through the rubber pad. This is junk! Dont waste your time or money.

Leggi più recensioni su brownells.com

Scelti da altri clientie

B5 SYSTEMS CAR-15 BUTTSTOCK MIL-SPEC BLACK
CAR-15 BUTTSTOCK MIL-SPEC

B5 SYSTEMS

In magazzino

CHF 74.90 *

Calci

PRO MAG RUGER MINI-14 MAGAZINE 223/5.56 20RD STEEL BLACK
RUGER MINI-14 MAGAZINE 223/5.56

PRO MAG

In magazzino

CHF 39.90 * CHF 39.90 - CHF 44.90*

Caricatori | Magazines

2.7

TK PRODUCTS M1 BUDDY
M1 MUZZLE BUDDY

TK PRODUCTS

Riordinato

CHF 22.90 * CHF 22.90 - CHF 46.90*

Guida aste di pulizia

3.4

D.S. ARMS C.A.R. HANDGUARD SET BLACK
AR-15 C.A.R. HANDGUARD SET

D.S. ARMS

Riordinato

CHF 33.90 *

VLTOR WEAPON SYSTEMS M14/M1A UPPER RAIL SYSTEM BLACK
M1A/M14 EXTENDED LENGTH RAIL SYSTEM

VLTOR WEAPON SYSTEMS

Ordinabile su richiesta

CHF 469.90 *

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.