Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

SINCLAIR INTERNATIONAL
SINCLAIR CASE NECK SORTING TOOL

749002607
The Sinclair Case Neck Sorting Tool is designed for the reloader to quickly sort brass by neck wall thickness. Large variances in neck wall thickness can affect the consistency of how the case seals the chamber and is also an indication of variances in body wall thickness. Cases are rotated under an indicator tip while they are supported on a case neck pilot and a support pin through the flash hole. The low profile and stable platform makes for comfortable use and accurate results. The tool works for 22 thru 45 caliber cases and can be used on 17 and 20 caliber cases with the optional carbide alignment rod. Tool can be ordered with or without a dial indicator. Order 17 Caliber and 20 Caliber Sinclair Case Neck Pilots separately. MIC-4 pin fits .060 & .080 flash holes. Available pilot stops. It is intended for use with either a .001" (one thousandth) reading dial indicator or digital indicator, both with a 3⁄8" shank. This tool will not accept most .0001” (one ten-thousandth) reading dial indicators.
22.9 109.9 3 CHF
Artikel-Nr.: 749002607
SINCLAIR INTERNATIONAL 17-20 CALIBER CARBIDE ALIGNMENT ROD
Herstellerproduktnummer: 591200 Mit dem Sinclair Case Neck Sorting Tool kann der Reloader Messing schnell nach Halswandstärke sortieren. Grosse Abweichungen in der Halswanddicke können die Konsistenz der Abdichtung der Kammer beeinflussen und sind auch ein Hinweis auf Abweichungen in der Körperwanddicke. Die Hüllen werden unter einer Indikatorspitze gedreht, während sie von einem Hüllenhalspiloten und einem Haltestift durch das Blitzloch gehalten werden. Die flache und stabile Plattform sorgt für eine komfortable Nutzung und genaue Ergebnisse. Das Werkzeug ist für die Kaliber 22 bis 45 geeignet und kann mit dem optionalen Hartmetallausrichtungsstab für die Kaliber 17 und 20 verwendet werden. Werkzeug kann mit oder ohne Messuhr bestellt werden. 17 Caliber und 20 Caliber Sinclair Case Neck Piloten separat bestellen. MIC-4-Stift passt für .060- und .080-Blitzlöcher. Verfügbare Pilotstopps.
22.9 CHF 16 CHF 22.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Kaliber: 17 Caliber (.172), 20 Caliber (.204)

Eigenschaften

Kaliber: 17 Caliber (.172),20 Caliber (.204) Versandgewicht: 0.023kg Versandhöhe: 10mm Versandbreite: 10mm Versandlänge: 86mm

Artikeldetails

Made in USA



Artikel-Nr.: 749007129
SINCLAIR INTERNATIONAL CASE NECK SORTING TOOL WITH DIAL INDICATOR
Herstellerproduktnummer: 591100 Mit dem Sinclair Case Neck Sorting Tool kann der Reloader Messing schnell nach Halswandstärke sortieren. Grosse Abweichungen in der Halswanddicke können die Konsistenz der Abdichtung der Kammer beeinflussen und sind auch ein Hinweis auf Abweichungen in der Körperwanddicke. Die Hüllen werden unter einer Indikatorspitze gedreht, während sie von einem Hüllenhalspiloten und einem Haltestift durch das Blitzloch gehalten werden. Die flache und stabile Plattform sorgt für eine komfortable Nutzung und genaue Ergebnisse. Das Werkzeug ist für die Kaliber 22 bis 45 geeignet und kann mit dem optionalen Hartmetallausrichtungsstab für die Kaliber 17 und 20 verwendet werden. Werkzeug kann mit oder ohne Messuhr bestellt werden. 17 Caliber und 20 Caliber Sinclair Case Neck Piloten separat bestellen. MIC-4-Stift passt für .060- und .080-Blitzlöcher. Verfügbare Pilotstopps.
109.9 CHF 1 CHF 109.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Patrone: Universal
Artikel-Nr.: 749006612
SINCLAIR INTERNATIONAL CASE NECK SORTING TOOL (NO INDICATOR)
Herstellerproduktnummer: 591000 Mit dem Sinclair Case Neck Sorting Tool kann der Reloader Messing schnell nach Halswandstärke sortieren. Grosse Abweichungen in der Halswanddicke können die Konsistenz der Abdichtung der Kammer beeinflussen und sind auch ein Hinweis auf Abweichungen in der Körperwanddicke. Die Hüllen werden unter einer Indikatorspitze gedreht, während sie von einem Hüllenhalspiloten und einem Haltestift durch das Blitzloch gehalten werden. Die flache und stabile Plattform sorgt für eine komfortable Nutzung und genaue Ergebnisse. Das Werkzeug ist für die Kaliber 22 bis 45 geeignet und kann mit dem optionalen Hartmetallausrichtungsstab für die Kaliber 17 und 20 verwendet werden. Werkzeug kann mit oder ohne Messuhr bestellt werden. 17 Caliber und 20 Caliber Sinclair Case Neck Piloten separat bestellen. MIC-4-Stift passt für .060- und .080-Blitzlöcher. Verfügbare Pilotstopps.
69.9 CHF 0 CHF 69.90 *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften: Patrone: Universal
The Sinclair Case Neck Sorting Tool is designed for the reloader to quickly sort brass by neck wall thickness. Large variances in neck wall thickness can affect the consistency of how the case seals the chamber and is also an indication of variances in body wall thickness. Cases are rotated under an indicator tip while they are supported on a case neck pilot and a support pin through the flash hole. The low profile and stable platform makes for comfortable use and accurate results. The tool works for 22 thru 45 caliber cases and can be used on 17 and 20 caliber cases with the optional carbide alignment rod. Tool can be ordered with or without a dial indicator. Order 17 Caliber and 20 Caliber Sinclair Case Neck Pilots separately. MIC-4 pin fits .060 & .080 flash holes. Available pilot stops. It is intended for use with either a .001" (one thousandth) reading dial indicator or digital indicator, both with a 3⁄8" shank. This tool will not accept most .0001” (one ten-thousandth) reading dial indicators.
Newsletter