The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
Mehr...
Der hölzerne Sinclair-Nachladepressenständer ist für die Aufnahme von 7/8 Zoll bis 14 Nachladepressen für den Feld- / Bereichsgebrauch oder für den Heimgebrauch ausgelegt, wenn eine dauerhafte Montage nicht möglich ist. Ideal für Belastungstests im Bereich. Der Ständer besteht aus massivem Birkensperrholz und ist mit Aluminiumwinkeln zur strukturellen Unterstützung verstärkt. Die grosse Grundfläche bietet eine stabile Basis, wenn sie mit einer Schraubzwinge festgeklemmt wird. Pressenständer werden komplett montiert geliefert. Entwickelt für die Aufnahme der folgenden Pressen: RCBS Rockchucker, Redding Boss und Big Boss, Hornady 007 Pressen und ähnlich grosse Pressen. Der Benutzer muss die Befestigungslöcher in der oberen Platte mit einem normalen Bohrer markieren und bohren. Befestigungsschrauben sind nicht im Lieferumfang enthalten, da wir nicht wissen, welche Lochgrösse Sie für Ihre Presse benötigen. Die Montageplatte hat eine bohrbare Montagefläche mit einer Breite von viereinhalb Zoll und einer Tiefe von fünfeinhalb Zoll.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Maximize bench space(27.07.2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02.05.2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.
Artikel-Nr.: 749006972 SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND Der hölzerne Sinclair-Nachladepressenständer ist für die Aufnahme von 7/8 Zoll bis 14 Nachladepressen für den Feld- / Bereichsgebrauch oder für den Heimgebrauch ausgelegt, wenn eine dauerhafte Montage nicht möglich ist. Ideal für Belastungstests im Bereich. Der Ständer besteht aus massivem Birkensperrholz und ist mit Aluminiumwinkeln zur strukturellen Unterstützung verstärkt. Die grosse Grundfläche bietet eine stabile Basis, wenn sie mit einer Schraubzwinge festgeklemmt wird. Pressenständer werden komplett montiert geliefert. Entwickelt für die Aufnahme der folgenden Pressen: RCBS Rockchucker, Redding Boss und Big Boss, Hornady 007 Pressen und ähnlich grosse Pressen. Der Benutzer muss die Befestigungslöcher in der oberen Platte mit einem normalen Bohrer markieren und bohren. Befestigungsschrauben sind nicht im Lieferumfang enthalten, da wir nicht wissen, welche Lochgrösse Sie für Ihre Presse benötigen. Die Montageplatte hat eine bohrbare Montagefläche mit einer Breite von viereinhalb Zoll und einer Tiefe von fünfeinhalb Zoll.
174.9CHF0CHF 174.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
Mehr...
Der hölzerne Sinclair-Nachladepressenständer ist für die Aufnahme von 7/8 Zoll bis 14 Nachladepressen für den Feld- / Bereichsgebrauch oder für den Heimgebrauch ausgelegt, wenn eine dauerhafte Montage nicht möglich ist. Ideal für Belastungstests im Bereich. Der Ständer besteht aus massivem Birkensperrholz und ist mit Aluminiumwinkeln zur strukturellen Unterstützung verstärkt. Die grosse Grundfläche bietet eine stabile Basis, wenn sie mit einer Schraubzwinge festgeklemmt wird. Pressenständer werden komplett montiert geliefert. Entwickelt für die Aufnahme der folgenden Pressen: RCBS Rockchucker, Redding Boss und Big Boss, Hornady 007 Pressen und ähnlich grosse Pressen. Der Benutzer muss die Befestigungslöcher in der oberen Platte mit einem normalen Bohrer markieren und bohren. Befestigungsschrauben sind nicht im Lieferumfang enthalten, da wir nicht wissen, welche Lochgrösse Sie für Ihre Presse benötigen. Die Montageplatte hat eine bohrbare Montagefläche mit einer Breite von viereinhalb Zoll und einer Tiefe von fünfeinhalb Zoll.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Maximize bench space(27.07.2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02.05.2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.