Strong, lightweight, aluminum mount attaches to the Ruger® factory ring cuts and requires no drilling and tapping. Uses three, steel, recoil pins to prevent “scope flyoff,” and accepts Weaver-style rings or mount systems such as used on Tasco 40mm red dot optics. Super Redhawk™ .44 Mag fits only the .44 Magnum and can be installed without removing the front and rear sights. Features a matte, silver, anodized finish. Super Redhawk‡ Casull is similar in design, but uses the rear sight notch as a recoil lug to allow the frame and mount to take maximum recoil. Fits .44 Magnum, .454 Casull, and Ruger™ .480 models with removal of the rear sight. Available with black, anodized finish.
Die stabile, leichte Aluminiumhalterung lässt sich an den Ruger®-Werksringen befestigen und erfordert kein Bohren und Gewindeschneiden. Verwendet drei Rückstossstifte aus Stahl, um ein „Abheben des Zielfernrohrs“ zu verhindern, und akzeptiert Weaver-artige Ringe oder Halterungssysteme, wie sie bei Tasco 40 mm-Rotpunktoptiken verwendet werden. Das Super Redhawk ™ .44 Mag passt nur auf das .44 Magnum und kann installiert werden, ohne das vordere und hintere Visier zu entfernen. Verfügt über ein mattes, silberfarbenes, eloxiertes Finish. Super Redhawk ‡ Casull hat ein ähnliches Design, verwendet jedoch die Kerbe für das Visier als Rückstossöse, damit der Rahmen und die Halterung den maximalen Rückstoss aufnehmen können. Für die Modelle .44 Magnum, .454 Casull und Ruger ™ .480 mit abgenommenem Visier. Erhältlich in schwarz eloxierter Ausführung.
TECHNISCHE DATEN: .44 Mag - Aluminium, silber, matt, eloxiert. 12,7 cm lang. Passt nur für .44 Magnum. 2,6 oz (73 g) Gewicht Casull - Aluminium, schwarz, matt eloxiert. 14 cm lang. Für die Modelle .44 Magnum, .454 Casull und .480 Ruger®. Inklusive Befestigungsschrauben.
Mehr...
Kundenbewertungen zu WEIGAND COMBAT SUPER REDHAWK® .44 MAG MOUNT
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Top Quality(08.01.2016)
Great product, you are limited to where you can mount rings/red dot sight since the mounting screws could be in the way. I mounted an Aim Point H1 red dot sight and was limited in positioning but was able to mount it in a decent spot. The mount fit snug at the rear end which is what I would expect so all the force from heavy recoil isn't soley on the mounting screws. I mounted this to a 480 ruger Super Redhawk with a cut down 5 1/2" barrel shooting a 425 gr cast bullet at 1100 fps with no movement of sight and I'm able to get 1 9/16" groups at 50 yrds. Highly recommended for red dot sights.
I did cut this mount down in the front at a simular angle to my Super Redhawk which looks custom fit to my gun. Tried uploading a pic but it wouldn't let me. Good Hunting!
Artikel-Nr.: 957000036 WEIGAND COMBAT SUPER REDHAWK® .44 MAG MOUNT Herstellerproduktnummer: SRH Die stabile, leichte Aluminiumhalterung lässt sich an den Ruger®-Werksringen befestigen und erfordert kein Bohren und Gewindeschneiden. Verwendet drei Rückstossstifte aus Stahl, um ein „Abheben des Zielfernrohrs“ zu verhindern, und akzeptiert Weaver-artige Ringe oder Halterungssysteme, wie sie bei Tasco 40 mm-Rotpunktoptiken verwendet werden. Das Super Redhawk ™ .44 Mag passt nur auf das .44 Magnum und kann installiert werden, ohne das vordere und hintere Visier zu entfernen. Verfügt über ein mattes, silberfarbenes, eloxiertes Finish. Super Redhawk ‡ Casull hat ein ähnliches Design, verwendet jedoch die Kerbe für das Visier als Rückstossöse, damit der Rahmen und die Halterung den maximalen Rückstoss aufnehmen können. Für die Modelle .44 Magnum, .454 Casull und Ruger ™ .480 mit abgenommenem Visier. Erhältlich in schwarz eloxierter Ausführung.
79.9CHF21CHF 79.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Art: Weaver-Style BasesBasenanzahl: 1-PieceFarbe: SilverHersteller/Modell: RugerMaterial: AluminumModell: Super Blackhawk, Super Red Hawk
Strong, lightweight, aluminum mount attaches to the Ruger® factory ring cuts and requires no drilling and tapping. Uses three, steel, recoil pins to prevent “scope flyoff,” and accepts Weaver-style rings or mount systems such as used on Tasco 40mm red dot optics. Super Redhawk™ .44 Mag fits only the .44 Magnum and can be installed without removing the front and rear sights. Features a matte, silver, anodized finish. Super Redhawk‡ Casull is similar in design, but uses the rear sight notch as a recoil lug to allow the frame and mount to take maximum recoil. Fits .44 Magnum, .454 Casull, and Ruger™ .480 models with removal of the rear sight. Available with black, anodized finish.
Die stabile, leichte Aluminiumhalterung lässt sich an den Ruger®-Werksringen befestigen und erfordert kein Bohren und Gewindeschneiden. Verwendet drei Rückstossstifte aus Stahl, um ein „Abheben des Zielfernrohrs“ zu verhindern, und akzeptiert Weaver-artige Ringe oder Halterungssysteme, wie sie bei Tasco 40 mm-Rotpunktoptiken verwendet werden. Das Super Redhawk ™ .44 Mag passt nur auf das .44 Magnum und kann installiert werden, ohne das vordere und hintere Visier zu entfernen. Verfügt über ein mattes, silberfarbenes, eloxiertes Finish. Super Redhawk ‡ Casull hat ein ähnliches Design, verwendet jedoch die Kerbe für das Visier als Rückstossöse, damit der Rahmen und die Halterung den maximalen Rückstoss aufnehmen können. Für die Modelle .44 Magnum, .454 Casull und Ruger ™ .480 mit abgenommenem Visier. Erhältlich in schwarz eloxierter Ausführung.
TECHNISCHE DATEN: .44 Mag - Aluminium, silber, matt, eloxiert. 12,7 cm lang. Passt nur für .44 Magnum. 2,6 oz (73 g) Gewicht Casull - Aluminium, schwarz, matt eloxiert. 14 cm lang. Für die Modelle .44 Magnum, .454 Casull und .480 Ruger®. Inklusive Befestigungsschrauben.
Mehr...
Kundenbewertungen zu WEIGAND COMBAT SUPER REDHAWK® .44 MAG MOUNT
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Top Quality(08.01.2016)
Great product, you are limited to where you can mount rings/red dot sight since the mounting screws could be in the way. I mounted an Aim Point H1 red dot sight and was limited in positioning but was able to mount it in a decent spot. The mount fit snug at the rear end which is what I would expect so all the force from heavy recoil isn't soley on the mounting screws. I mounted this to a 480 ruger Super Redhawk with a cut down 5 1/2" barrel shooting a 425 gr cast bullet at 1100 fps with no movement of sight and I'm able to get 1 9/16" groups at 50 yrds. Highly recommended for red dot sights.
I did cut this mount down in the front at a simular angle to my Super Redhawk which looks custom fit to my gun. Tried uploading a pic but it wouldn't let me. Good Hunting!