Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

APEX TACTICAL SPECIALTIES INC
S&W M&P FORWARD SET SEAR & TRIGGER KIT

856008005147 100008892

FEATURES: Includes forward set sear, trigger, striker block kit, and spring kit Striker block kit includes striker block, spring, and talon tactical tool Spring kit includes 4 and 5.5lb trigger return springs, trigger return spring install tool, sear spring, and ram spring Results in trigger pull weight near 4lbs for competition or 5.5 for duty/carry Smooth uptake and reset Total trigger travel of .120" Improved safety features make the FSS a reliably safe trigger system Works with all Smith & Wesson M&P pistols in all centerfire calibers and configurations except M&P Shield Requires the use of the sear housing block designed for the large size sear plunger and spring (current production as of June, 2011) BENEFITS: Forward set trigger reduces trigger pre-travel and over-travel The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger on the center of the trigger and encourages trigger manipulation directly in line with the bore axis Forward set sear shortens the stroke of the trigger pull by dropping the striker at a point farther forward than the factory sear Forward set striker block has an improved radius on the striker block face that produces a smoother trigger pull and eliminates most false reset issues This kit produces a smooth 4lb. trigger pull for competition or 5.5lbs for duty/carry use Does not fit M&P 2.0 Pistols

SPECS: **REQUIRES the use of the larger 1/8 inch sear spring & plunger set up (included)**

Plus...

Caractéristiques : Comprend ensemble avant sear, déclencheur, kit de l’attaquant de bloc et printemps kit de bloc attaquant comprend attaquant block, printemps et outil tactique talon ressort kit comprend 4 et 5,5 lb ressorts de rappel de détente, outil d’installation de gâchette ressort de rappel, ressort de gâchette et ram printemps résultats en poids de détente près de 4lbs pour compétition ou 5.5 pour l’absorption du devoir/porte lisse et réinitialiser le voyage de détente totale de. 120" amélioration des caractéristiques de sécurité font la FSS, un système de déclenchement fiable sécurisé fonctionne avec tous les Smith & Wesson Maes & pistolets dans toutes les configurations et les calibres à percussion centrale sauf Maes & bouclier nécessite l’utilisation de la gâchette logements bloc conçu pour le plongeur saisir de grande taille et le printemps (production actuelle à partir de juin 2011) avantages : définir avant déclenchement réduit déclencheur avant leur départ et braquage excessif la barre pivotante monté de sécurité du centre évite la mise en service involontaire en créant un bloc de détente qui se désengagera pas sauf si le tireur met le doigt sur le centre de la détente et favorise la manipulation de détente directement en ligne avec l’axe de l’alésage en avant ensemble sear raccourcit la course de la détente en laissant tomber l’attaquant à un point plus loin avant que la gâchette de l’usine avant la valeur bloc attaquant a un rayon amélioré sur la face du bloc attaquant qui produit une détente plus lisse et élimine les problèmes de remise à zéro plus fausses ce kit produit une détente lisse 4 lb pour compétition ou 5.5 lbs pour utilisation de devoir transporter ne rentre pas Maes & 2.0 pistolets

Spécifications : ** nécessite l’utilisation du plus grand ressort de gâchette 1/8 de pouce & piston mis en place (inclus) **

Plus...

Évaluations client de APEX TACTICAL SPECIALTIES INC S&W M&P FORWARD SET SEAR & TRIGGER KIT

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.8

Awesome Comp. Trigger (09.02.2012)

After installing this on a customers M&P VTAC 9, I couldn't believe the Improved trigger over travel. As advertised, it shortened the pull and reset.
Also feels more comparable to a 1911 style. No weak, or mushy trigger.
Care needed when installing due to small springs. Faster shots, and no sight upset when dry fired also.

The gun should ship with this setup! (10.03.2012)

First: I purchased this kit directly from Apex before it became available on Brownells.

I am rating this a 5-star when compared to the stock trigger (which is positively awful in MA-compliant trim). I installed this in my M&P 9mm and it has dramatically improved the feel and accuracy of the gun.

The installation is not hard if you follow the video and take your time - just be sure to have some roll pin punches on hand and work over a white towel to catch any errant parts.

No, it will not turn an M&P trigger into the equivalent of a single action revolver or a well tuned 1911, but it takes the stock gritty, creepy, sandy feeling trigger and makes the gun a positive pleasure to shoot.

The pretravel is greatly reduced, the break is crisp and the overtravel is also reduced - all of this adds up to a truly amazing transformation of the M&P 9.

A must have! (18.03.2012)

I run this on my Compact and fullsize .40 and my 9mm Vtac. It makes the trigger what it should be. Glock guys will complain about the reset not being like a Glock. But you will have a super trigger in a very reliable gun in a very sharp package. As opposed to a very relaible gun that looks like a hammered trrd with a audible trigger reset.If they only made it for the M&P22

M&P FORWARD SET SEAR & TRIGGER KIT (01.06.2012)

I had the kit installed on an M&P 45 and quite frankly, if it did anything, I couldn't notice it. The company is very responsive and sent different springs and parts due to what I said. It just didn't do anything that I could notice?

Second best thing to a 1911 trigger. (04.07.2012)

Purchased from Apex Tactical before it was sold by Brownell's. Sequentually tried out all of the Apex M&P kits offered by Brownell's as they were made available. Each was an improvement on the last. The Apex Tactical Forward Set Sear Trigger group proved to the be the best by far. With the correct backstrap, the feel of my M&P Pro 9 feels very similar to my 1911s, in my ability to make fast accurate double taps. The travel, break, and reset are all a 150% improvement over the factory set up. It make the M&P Pro what it's marketed to be, competition ready.

This Kit is Awesome (10.08.2012)

I had this installed in my M&P 45ACP. It made the Gun shoot like a 1911

Very Impressed (30.05.2013)

I was asked by a customer to install this kit into his new M&P9. Having used APEX products before, I knew that this kit should be nice, but was wondering how the "Glock type" trigger would feel after the installation. I may be one of the few that like the original trigger in the M&P series.

After it was installed, the trigger was very nice at 4.75# with no additional work on the other parts that normally are polished to smooth the action of the trigger group. It should take about 1/2 to 1 hour to install, if one takes time and is methodical. I was very impressed with the way the trigger felt and worked without other attention.

Essential for all M&P's! (31.01.2014)

I have installed the FSS & Trigger kit on two of my M&P 45's. In my opinion this kit should come standard with all M&P's leaving the factory. As advertised, the kit significantly reduces pre and over travel. After installation, my newer M&P 45's have a trigger pull of 4-5 lbs, compared to trigger pulls of 9+lbs from the factory. The installation process is straightforward (but you must watch Randy's video on apextactical.com). On my first M&P 45, the installation went perfectly. However, my full size M&P 45 required modification to the front of the trigger well (where the trigger rests) in order for the center pivoting safety to work properly. Apex customer service is excellent. They guided me through the modifications necessary to ensure proper functioning of the FSS & Trigger. The Apex technician that I spoke to stated that S&W has recently changed their molding to cause a rounding of the corners of the trigger well. This can cause the trigger to rest farther back, negating the smooth function of the Safety or its ability to fully engage. I think this issue is isolated to the M&P 45. Obviously, this is an issue with S&W, and I do not blame Apex for this complication at all. Apex is a great company that makes high quality aftermarket products. I highly recommend this kit!

Best upgrade I've made to my M&P (04.06.2014)

I had my stock sear worked a bit by a gunsmith friend, and it lightened and cleaned the grit out a bit, so I didn't have high hopes for major improvement from the Apex kit, but I was very wrong. The trigger is fantastic now. Anyone I have try it can't believe it was a drop in kit. I'm mechanically inclined, but don't have much experience working on guns. Install took about an hour as the lock block was extremely tight in my M&P. I completed it fine though. I do wish they'd include instructions, as a low resolution youtube video is all I could find.

One note... When taking the trigger group out, pay close attention to the take down lever retainer wire. This wasn't covered in the video and mine was swallowed by the black hole under my bench. Based on what I read online, it is a very common part to lose, and most everyone is out of stock of it. I called Smith & Wesson, explained the issue, and the shipped me one out free of charge. Didn't even ask for the serial number or anything. A+ customer service. The gun functioned fine without it as the recoil rod captures the lever, but with the slide off, the takedown lever would fall out.

Well Worth the Cost (25.02.2015)

This kit is amazing. I installed this in my Pro Series 40L and it made a world of difference. Very little take up and over travel with a crisp break. Installation was very easy with following the online video. It took about 30 minutes of working at a leisurely pace. A small adjustment of the trigger bar loop was needed on my gun but that too was a simple process. If you shoot an M&P you will not regret installing this kit. I will be installing one of these in my M&P 9 as well.

Apex Trigger (20.12.2015)

The best thing I could have done to my M&P 40. Easy to install. I will soon get one for my Shield. Great Product!!

Get one (17.01.2017)

The best upgrade you can make to your M&P handgun. Cleans up the overtravel and the grittiness of the stock trigger. This is the way the M&P was meant to be!

Lire 12 plus d'avis sur brownells.com

274.9 274.9 1 CHF

Référence: 100008892
APEX TACTICAL SPECIALTIES INC S&W M&P FORWARD SET SEAR & TRIGGER KIT
Ref Fabricant: 100-067 856008005147 Caractéristiques : Comprend ensemble avant sear, déclencheur, kit de l’attaquant de bloc et printemps kit de bloc attaquant comprend attaquant block, printemps et outil tactique talon ressort kit comprend 4 et 5,5 lb ressorts de rappel de détente, outil d’installation de gâchette ressort de rappel, ressort de gâchette et ram printemps résultats en poids de détente près de 4lbs pour compétition ou 5.5 pour l’absorption du devoir/porte lisse et réinitialiser le voyage de détente totale de. 120" amélioration des caractéristiques de sécurité font la FSS, un système de déclenchement fiable sécurisé fonctionne avec tous les Smith & Wesson Maes & pistolets dans toutes les configurations et les calibres à percussion centrale sauf Maes & bouclier nécessite l’utilisation de la gâchette logements bloc conçu pour le plongeur saisir de grande taille et le printemps (production actuelle à partir de juin 2011) avantages : définir avant déclenchement réduit déclencheur avant leur départ et braquage excessif la barre pivotante monté de sécurité du centre évite la mise en service involontaire en créant un bloc de détente qui se désengagera pas sauf si le tireur met le doigt sur le centre de la détente et favorise la manipulation de détente directement en ligne avec l’axe de l’alésage en avant ensemble sear raccourcit la course de la détente en laissant tomber l’attaquant à un point plus loin avant que la gâchette de l’usine avant la valeur bloc attaquant a un rayon amélioré sur la face du bloc attaquant qui produit une détente plus lisse et élimine les problèmes de remise à zéro plus fausses ce kit produit une détente lisse 4 lb pour compétition ou 5.5 lbs pour utilisation de devoir transporter ne rentre pas Maes & 2.0 pistolets

274.9 CHF 2 CHF 274.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Finition: Noir Manufacture: Smith & Wesson Modèle: M&P Style: CompÃ©tition, SÃ©curitÃ© DÃ©tente

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Finition: Noir Manufacture: Smith & Wesson Modèle: M&P Style: CompÃ©tition,SÃ©curitÃ© DÃ©tente Poids du colis: 0.023kg Hauteur d'expédition: 13mm Largeur d'expédition: 58mm Longueur d'expédition: 84mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c

SPECS: **REQUIRES the use of the larger 1/8 inch sear spring & plunger set up (included)**

Plus...

Spécifications : ** nécessite l’utilisation du plus grand ressort de gâchette 1/8 de pouce & piston mis en place (inclus) **

Plus...

Évaluations client de APEX TACTICAL SPECIALTIES INC S&W M&P FORWARD SET SEAR & TRIGGER KIT

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.8

Awesome Comp. Trigger (09.02.2012)

The gun should ship with this setup! (10.03.2012)

A must have! (18.03.2012)

M&P FORWARD SET SEAR & TRIGGER KIT (01.06.2012)

Second best thing to a 1911 trigger. (04.07.2012)

This Kit is Awesome (10.08.2012)

I had this installed in my M&P 45ACP. It made the Gun shoot like a 1911

Very Impressed (30.05.2013)

Essential for all M&P's! (31.01.2014)

Best upgrade I've made to my M&P (04.06.2014)

Well Worth the Cost (25.02.2015)

Apex Trigger (20.12.2015)

The best thing I could have done to my M&P 40. Easy to install. I will soon get one for my Shield. Great Product!!

Get one (17.01.2017)

The best upgrade you can make to your M&P handgun. Cleans up the overtravel and the grittiness of the stock trigger. This is the way the M&P was meant to be!

Lire 12 plus d'avis sur brownells.com

Poursuivre vos achats

TRUGLO MULTIPLE RETICLE/DUAL COLOR OPEN RED DOT SIGHT
OPEN RED DOT SIGHT

TRUGLO

En stock

CHF 124.90 *

Viseurs Reflex

2.6

APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK
POLYMER ARMORER'S BLOCK & TOOLING PLATE

APEX TACTICAL SPECIALTIES INC

En stock

CHF 74.90 * CHF 64.90 - CHF 74.90*

Etablis & Etaux

3.4

BRAVO COMPANY KEYMOD BCMGUNFIGHTER MOD 3 VERTICAL GRIP POLYMER BLACK
KEYMOD BCMGUNFIGHTER MOD 3 VERTICAL GRIP

BRAVO COMPANY

En stock

CHF 33.90 *

Poignées Verticales

LONE WOLF DIST. ULTIMATE ARMORER'S TOOL
ULTIMATE ARMORER'S TOOL for GLOCK®

LONE WOLF DIST.

Non disponible

Outils Takedown

3.3

MTM CASE-GARD FLIP TOP RIFLE AMMO BOX 223-RUGER 6X47 100 ROUND BLUE
FLIP TOP RIFLE AMMO BOXES

MTM CASE-GARD

En stock

CHF 15.90 * CHF 11.90 - CHF 19.90*

Boîtes pour Munitions Carabine

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile