Votre panier est vide.

Panier

0917309915

N-202 PRO-SPRING KIT FOR S&W K,L,N FRAME REVOLVER

050806101883 080665202

"Guaranteed Superior"

Standard power kit with a Power Rib mainspring that duplicates the factory spring's rate. Gives positive ignition of magnum primers, vastly improved smoothness and consistency of pull. Includes 13, 14, and 15 lb. rebound springs for precise tuning.

Plus...

« La garantie supérieure »

Kit d'alimentation standard avec un ressort Power Rib qui duplique le taux du ressort de l'usine. Donne à allumage commandé des amorces magnum, finesse nettement améliorée et la cohérence de la traction. Comprend les 13, 14 et 15 lb rebond des ressorts pour un réglage précis.

Plus...

Évaluations client de BROWNELLS PRO-SPRING KIT #SWK/L/N-202 FOR S&W K, L, N FRAME REVOLVER

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.4

poor quality (03.09.2011)

Had a hard time installing the mainspring when i tried to pull the hammer the mainspring hit the rebound slide and would not let the sear engage and the end of the spring bent, rebound springs are smaller dia than original and fit in the slide sloppy but does seen to work alright not impressed

Big improvement over stock springs (27.03.2012)

Just ordered my second Pro-Spring Standard Kit for a S&W revolver. This kit offers significant improvement over the stock springs without the worry of iffy ignition which can be the case with a lighter than standard spring kit. This kit can readily be put in by a basement gunsmith but if you've never done it before, watch Brownell's short instructional video on how to do so a couple times. If you still are not confident a smith can drop this in for you in a couple minutes. I installed my first kit w/o problem or modification. This is an inexpensive, quick, and easy way to smooth up your S&W revolver's DA and lighten it's SA trigger pull...

Great Set (03.09.2012)

Great product. All parts fit well. I added these in conjunction with trigger job. Very smooth. The best part of this kit is the full strength hammer spring. I have shoot all types of ammo and in 1000 plus rounds I have not had any mis fires.

202 Spring Kit (21.03.2014)

I picked up a NIB 629-6 for hunting, field carry, & defense. As usual out of the box, the SA trigger was adequate but a bit rough and the DA so heavy my trigger pull gauge couldn't display it. My upgrade priorities were sure ignition with a variety of primers due to spotty availability of components, safe clean breaking reasonably light SA pull, and a safe smooth reasonably light DA trigger pull. I used the Brownells 202 Spring Kit (standard rate Main Spring) and an Extra Long Firing Pin with outstanding results. Using the 15 lbs Trigger Rebound Spring I achieved a clean breaking 4lbs 2 oz SA, smooth 8lbs 4 oz DA, and the extra length firing pin yielded 100% ignition with every make & type of primer I tested/load including the Large Pistol Magnum that is so notorious for being hard to ignite. All parts fit perfectly and installation was fast & easy (disclaimer: I have several decades of experience working on S&W revolvers but a noob basement smith with some patience should have no problems). Couldn't be happier with the end result, were it allowed I would have 100% confidence in this handgun for duty carry. Once more, great products from Brownells. Thanks!

EXCELLENT (18.06.2016)

Brought a 1960's S&W Combat 41 Mag back to outstanding performance. I have WAY TOO MANY firearms. Oxymoron ? Tho the description says "by Brownells", these are Wolff Springs and I use and trust said Wolff's in every firearm I own because they are EXCELLENT and that is again... WAY TOO MANY !

Excellent upgrade for 629 (24.07.2016)

Bought this to reduce trigger pull weight on DA and smooth out DA/SA trigger for my 629. It does exactly that. Now I can shoot DA all day long as it reduced the weight significantly. Both DA/SA also feel more smooth than the factory. Also bought C/S extra length firing pin in case ignition problem, but it's not needed at all with 15 pound spring. Great stuff

19-6 (28.09.2017)

Ran into a NIB model 19-6. Not easy to do in my state. The stock trigger was excellent, 10.5 lb DA and 3.75 SA. I was very pleased but decided to try the standard kit to see if there was any improvement. Installation was a snap. I went with the 14 lb rebound spring. DA is now 9.25 lbs and SA at 3 even. It is even smoother in DA now.

Lire 7 plus d'avis sur brownells.com

21.9 21.9 1 CHF

Référence: 080665202
BROWNELLS PRO-SPRING KIT #SWK/L/N-202 FOR S&W K, L, N FRAME REVOLVER
Ref Fabricant: 95207 050806101883 Kit d'alimentation standard avec un ressort Power Rib qui duplique le taux du ressort de l'usine. Donne à allumage commandé des amorces magnum, finesse nettement améliorée et la cohérence de la traction. Comprend les 13, 14 et 15 lb rebond des ressorts pour un réglage précis.

21.9 CHF 0 CHF 21.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Poids du colis: 0.023kg Hauteur d'expédition: 10mm Largeur d'expédition: 89mm Longueur d'expédition: 191mm

Détails de l'article

Fabriqué au USA

"Guaranteed Superior"

Plus...

« La garantie supérieure »

Plus...

Évaluations client de BROWNELLS PRO-SPRING KIT #SWK/L/N-202 FOR S&W K, L, N FRAME REVOLVER

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.4

poor quality (03.09.2011)

Big improvement over stock springs (27.03.2012)

Great Set (03.09.2012)

202 Spring Kit (21.03.2014)

EXCELLENT (18.06.2016)

Excellent upgrade for 629 (24.07.2016)

19-6 (28.09.2017)

Lire 7 plus d'avis sur brownells.com

Poursuivre vos achats

SPEEDLOADER - HKS CA-44 FITS .44 SPEC., 5-SHOT S&W 696, TAURUS, ROSSI

HKS CA-44 FITS .44 SPEC., 5-SHOT S&W 696, TAURUS, ROSSI
SPEEDLOADER

HKS

En stock

CHF 23.90 * CHF 21.90 - CHF 24.90*

Chargeurs Rapides Barillet

4.2

TAYLORS AND CO. PIETTA, 1858 REM CONVERSION CYLINDER 44 TO 45LC
REVOLVER CARTRIDGE CONVERSION CYLINDER

TAYLORS AND CO.

En stock

CHF 489.90 * CHF 489.90 - CHF 569.90*

Cylindres

4.1

POWER CUSTOM "N" FRAME HAND
S&W COMPETITION HAND

POWER CUSTOM

En stock

CHF 54.90 *

Doigts Elévateur

POWER CUSTOM YOKE ENDSHAKE BEARINGS, SMITH & WESSON K, L, N ONLY
CYLINDER BEARINGS

POWER CUSTOM

En stock

CHF 31.90 *

Outils Chambre

PACT CLUB TIMER III
CLUB TIMER III

PACT

En stock

CHF 209.90 *

Timers

3.3

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.