Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

SINCLAIR INTERNATIONAL Sinclair O-Ring Rod Guide, 308/30-06 Family


30 Caliber O-Ring Rod Guide

Traduction automatique (Description - Fabricant): Guide usiné Delrin ® vous permet de nettoyer en toute sécurité votre fusil.30-06/. Plus...

Référence: 749002947 050806111134 749002947
Machined Delrin® guide lets you safely clean your .30-06/.308 bolt action rifle from the breach—the proper way—by protecting the chamber and rifling from damage by the cleaning rod. Just remove the bolt assembly and insert the guide in its place to keep solvent from dripping into the action or trigger assembly. Silicone rubber "O" ring keeps the guide centered in the chamber for a snug fit and prevents solvent leakage. Integral port machined into the rear of the guide lets you put solvent on the brush or patch without spilling it on your work area. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22 (chambered for WSSM cartridges only) ,COOPER 16 (WSSM) chambered for WSSM cartridges only, BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

SPECS: Machined Delrin®, white. Silicone rubber O-ring. Fits bolt action rifles chambered for .30-06/.308 and other cartridges with a .471" case head diameter.

SINCLAIR INTERNATIONAL
27.9 27.9 1 CHF
749002947
30 Caliber O-Ring Rod Guide
Ref Fabricant: 003695308 050806111134 Guide usiné Delrin ® vous permet de nettoyer en toute sécurité votre fusil.30-06/.308 de la rupture — la bonne façon, en protégeant la chambre et de fusil contre les dommages causés par la tige de nettoyage. Juste enlever la culasse et insérez le guide à sa place pour garder le solvant de s'égoutter dans l'ensemble de l'action ou le déclencheur. Anneau de caoutchouc « O » de silicone maintient le guide centré dans la chambre pour un ajustement parfait et empêche les fuites de solvant. Port intégré usiné à l'arrière du guide vous permet de mettre solvant sur le pinceau ou le patch sans renverser il sur votre espace de travail. Adapteront les Actions suivantes : Borden Rimrock, COOPER 54 & 22 (chambré pour cartouches WSSM seulement), 16 COOPER (WSSM) chambré pour cartouches WSSM seulement, BRNO, Browning A-Bolt, CPS, Dakota Arms modèle 76, GA précision templier, Stiller Viper, Enfield modèle 1917, Grunig Elmiger, Hart, V9 modèle Herter, Husqvarna modèle HVA & M8000, HS Precision, Mauser modèle 3000, de type Mauser 38 suédoise cible, Mauser 98 , Signature de McMillan, Remington (tous les 700 600 & 7), Ruger modèle 77 court et long 77, S & W modèle 1970, Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster et Winchester (préproduction 2010 FN). NOTE spéciale : Les versions du modèle 70 FN n'ont pas tous.700 diamètre de boulon. Aussi ils ont fixé des éjecteurs donc une fente doit être fraisé sur toute la longueur du corps du guide de la tige. Si n'importe quel modèle 70 faite après que 2010 qui a le FN et pas Winchester New Haven Connecticut estampillé sur le récepteur est maintenant un GUIDE de ROD CUSTOM et vous dois vérifier le diamètre du boulon.
27.9 CHF 16 CHF 27.90 *
En stock
Caractéristiques: Calibre: 7 mm - 08 Remington, 7 mm Mauser (7 x 57 mm Mauser), 280 Remington, 280 Remington Ackley Improved, 7 mm Express, 7 mm - 08 Imp 40, 7 mm BR (Benchrest) Remington, 7 mm IHMSA, 280 Remington Imp 40, 30 BR (Benchrest) Diamètre Culasse: .695 Manufacture: Remington, Savage Arms Modèle: 10, 700 ML, 110 Mécanisme pour: Bordon Rimrock, BRNO, Browning A-Bolt, Cooper 22, Cooper 54, Cooper Model 16, CPS, Dakota Arms, Enfield US M1917, GA Precision Templar, Grunig Elmiger, H-S Precision, Hart Actions, Herter Model V9, Husqvarna Model HVA & M8000, Mauser 3000, Stillar Viper

Caractéristiques

Calibre: 280 Remington,280 Remington Imp 40,280 Remington Ackley Improved,7 mm - 08 Remington,7 mm - 08 Imp 40,7 mm BR (Benchrest) Remington,7 mm Express,7 mm IHMSA,7 mm Mauser (7 x 57 mm Mauser),30 BR (Benchrest) Diamètre Culasse: .695 Manufacture: Remington,Savage Arms Modèle: 10,110,700 ML Mécanisme pour: Bordon Rimrock,BRNO,Browning A-Bolt,Cooper 22,Cooper 54,Cooper Model 16,CPS,Dakota Arms,Enfield US M1917,GA Precision Templar,Grunig Elmiger,H-S Precision,Hart Actions,Herter Model V9,Husqvarna Model HVA & M8000,Mauser 3000,Stillar Viper

Détails de l'article

Fabriqué au USA



Machined Delrin® guide lets you safely clean your .30-06/.308 bolt action rifle from the breach—the proper way—by protecting the chamber and rifling from damage by the cleaning rod. Just remove the bolt assembly and insert the guide in its place to keep solvent from dripping into the action or trigger assembly. Silicone rubber "O" ring keeps the guide centered in the chamber for a snug fit and prevents solvent leakage. Integral port machined into the rear of the guide lets you put solvent on the brush or patch without spilling it on your work area. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22 (chambered for WSSM cartridges only) ,COOPER 16 (WSSM) chambered for WSSM cartridges only, BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

SPECS: Machined Delrin®, white. Silicone rubber O-ring. Fits bolt action rifles chambered for .30-06/.308 and other cartridges with a .471" case head diameter.