Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

SINCLAIR INTERNATIONAL Sinclair O-Ring Rod Guide, 308/30-06 Family


30 Caliber O-Ring Rod Guide

Traduzione automatica (Descrizione originale - Produttore): Guida machined Delrin ® permette di pulire in modo sicuro il fucile di azione del bullone.30-06/. Altro...

N. prodotto: 749002947 050806111134 749002947
Machined Delrin® guide lets you safely clean your .30-06/.308 bolt action rifle from the breach—the proper way—by protecting the chamber and rifling from damage by the cleaning rod. Just remove the bolt assembly and insert the guide in its place to keep solvent from dripping into the action or trigger assembly. Silicone rubber "O" ring keeps the guide centered in the chamber for a snug fit and prevents solvent leakage. Integral port machined into the rear of the guide lets you put solvent on the brush or patch without spilling it on your work area. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22 (chambered for WSSM cartridges only) ,COOPER 16 (WSSM) chambered for WSSM cartridges only, BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

SPECS: Machined Delrin®, white. Silicone rubber O-ring. Fits bolt action rifles chambered for .30-06/.308 and other cartridges with a .471" case head diameter.

SINCLAIR INTERNATIONAL
27.9 27.9 1 CHF
749002947
30 Caliber O-Ring Rod Guide
Parti Fabbricante: 003695308 050806111134 Guida machined Delrin ® permette di pulire in modo sicuro il fucile di azione del bullone.30-06/.308 dalla violazione — il modo corretto — proteggendo la camera e rigatura da danni dall'asta di pulizia. Basta rimuovere il bullone e inserire la guida al suo posto per mantenere solvibile gocciolamento nell'azione o trigger assieme. Anello di gomma "O" in silicone mantiene la guida centrata nella camera per una perfetta aderenza e impedisce la fuoriuscita di solvente. Porta integrante lavorato nella parte posteriore della guida consente di mettere solvente sulla spazzola o patch senza lo spargimento su area di lavoro. Si adattano le seguenti azioni: Rimrock Borden, COOPER 54 & 22 (camerata per cartucce WSSM soltanto), COOPER 16 (WSSM) camerata per cartucce WSSM solo, BRNO, Browning A-Bolt, CPS, Dakota Arms modello 76, GA precisione templare, Stiller Viper, Enfield modello 1917, Grünig Elmiger, Hart, Herter modello V9, Husqvarna modello HVA & M8000, HS Precision, Mauser modello 3000, tipo Mauser 38 svedese Target, Mauser 98 , Firma McMillan, Remington (tutti 700.600 & 7), Ruger modello 77 breve e lunga 77, S & W modello 1970, Savage 110, 112,11,12, 03A3 Springfield, Stolle (tutti), Tanner, Weatherby, Varmitmaster e Winchester (produzione di FN pre 2010). Nota speciale: FN versioni del modello 70 non tutti hanno.700 diametri del bullone. Essi hanno fissato anche eiettori così uno slot deve essere fresato giù la lunghezza del corpo guida asta. Quindi ogni 70 modello realizzato dopo 2010 con FN e non Winchester di New Haven Connecticut timbrato sul ricevitore è ora un CUSTOM ROD guida e si deve controllare il diametro del bullone.
27.9 CHF 15 CHF 27.90 *
Disponibile
Caratteristiche: Action Fit: Bordon Rimrock, BRNO, Browning A-Bolt, Cooper 22, Cooper 54, Cooper Model 16, CPS, Dakota Arms, Enfield US M1917, GA Precision Templar, Grunig Elmiger, H-S Precision, Hart Actions, Herter Model V9, Husqvarna Model HVA & M8000, Mauser 3000, Stillar Viper Adatto per: Remington, Savage Arms Cartuccia: 7 mm - 08 Remington, 7 mm Mauser (7 x 57 mm Mauser), 280 Remington, 280 Remington Ackley Improved, 7 mm Express, 7 mm - 08 Imp 40, 7 mm BR (Benchrest) Remington, 7 mm IHMSA, 280 Remington Imp 40, 30 BR (Benchrest) Diametro bullone: .695 Modello: 10, 700 ML, 110

Caratteristiche

Action Fit: Bordon Rimrock,BRNO,Browning A-Bolt,Cooper 22,Cooper 54,Cooper Model 16,CPS,Dakota Arms,Enfield US M1917,GA Precision Templar,Grunig Elmiger,H-S Precision,Hart Actions,Herter Model V9,Husqvarna Model HVA & M8000,Mauser 3000,Stillar Viper Adatto per: Remington,Savage Arms Cartuccia: 280 Remington,280 Remington Imp 40,280 Remington Ackley Improved,7 mm - 08 Remington,7 mm - 08 Imp 40,7 mm BR (Benchrest) Remington,7 mm Express,7 mm IHMSA,7 mm Mauser (7 x 57 mm Mauser),30 BR (Benchrest) Diametro del bullone: .695 Modello: 10,110,700 ML

Dettagli dell'elemento

Made in Usa



Machined Delrin® guide lets you safely clean your .30-06/.308 bolt action rifle from the breach—the proper way—by protecting the chamber and rifling from damage by the cleaning rod. Just remove the bolt assembly and insert the guide in its place to keep solvent from dripping into the action or trigger assembly. Silicone rubber "O" ring keeps the guide centered in the chamber for a snug fit and prevents solvent leakage. Integral port machined into the rear of the guide lets you put solvent on the brush or patch without spilling it on your work area. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22 (chambered for WSSM cartridges only) ,COOPER 16 (WSSM) chambered for WSSM cartridges only, BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

SPECS: Machined Delrin®, white. Silicone rubber O-ring. Fits bolt action rifles chambered for .30-06/.308 and other cartridges with a .471" case head diameter.