Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

SINCLAIR INTERNATIONAL
THUMLER'S TUMBLER STAINLESS STEEL TUMBLING KIT

749012773
The Sinclair Stainless Steel Tumbling Kit features Thumler’s Tumblers Model “B” 15 lb. tumbler and 5 lbs. of Stainless Steel tumbling media. This kit can handle up to 2 pounds of brass and is designed for wet tumbling use. DO NOT DRY TUMBLE!!!! Put the 5 pounds of Stainless Steel media into the tumbler, fill with 1 gallon of cold water, and add up to 2 pounds of brass and a couple teaspoons of dish washing detergent. The tumbler usually needs about 3-4 hours to completely clean the brass. Remove brass from solution, rinse with cold water and dry. Once finished, your brass will be cleaned inside and out, even in the primer pocket. For additional shine on your brass, tumble them for a short time in a standard vibratory tumbler with corncob media and polish.
519.9 519.9 1 CHF
Artikel-Nr.: 749012773
SINCLAIR INTERNATIONAL STAINLESS STEEL TUMBLING KIT, 110V Das Edelstahl-Tumbling-Kit von Sinclair enthält die Thumler-Tumbler, Modell „B“, 15 lb. und 5 lbs. Taumelmedien aus Edelstahl. Dieser Bausatz kann bis zu 2 Pfund Messing aufnehmen und ist für den Einsatz im Nasswäscher konzipiert. NICHT TROCKNEN !!! Geben Sie 5 Pfund Edelstahl in den Becher, füllen Sie 1 Gallone kaltes Wasser hinein und geben Sie bis zu 2 Pfund Messing und ein paar Teelöffel Geschirrspülmittel hinzu. Der Tumbler benötigt normalerweise ca. 3-4 Stunden, um das Messing vollständig zu reinigen. Messing aus der Lösung nehmen, mit kaltem Wasser abspülen und trocknen. Sobald Sie fertig sind, wird Ihr Messing innen und aussen gereinigt, sogar in der Primer-Tasche. Für zusätzlichen Glanz auf Ihrem Messing, stürzen Sie sie für eine kurze Zeit in einem Standard-Vibrationsbecher mit Maiskolben-Medien und Politur.
519.9 CHF 0 CHF 519.90 *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften

Versandgewicht: 9.346kg

Artikeldetails

Made in USA



The Sinclair Stainless Steel Tumbling Kit features Thumler’s Tumblers Model “B” 15 lb. tumbler and 5 lbs. of Stainless Steel tumbling media. This kit can handle up to 2 pounds of brass and is designed for wet tumbling use. DO NOT DRY TUMBLE!!!! Put the 5 pounds of Stainless Steel media into the tumbler, fill with 1 gallon of cold water, and add up to 2 pounds of brass and a couple teaspoons of dish washing detergent. The tumbler usually needs about 3-4 hours to completely clean the brass. Remove brass from solution, rinse with cold water and dry. Once finished, your brass will be cleaned inside and out, even in the primer pocket. For additional shine on your brass, tumble them for a short time in a standard vibratory tumbler with corncob media and polish.
Newsletter