Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
749012773
The Sinclair Stainless Steel Tumbling Kit features Thumler’s Tumblers Model “B” 15 lb. tumbler and 5 lbs. of Stainless Steel tumbling media. This kit can handle up to 2 pounds of brass and is designed for wet tumbling use. DO NOT DRY TUMBLE!!!! Put the 5 pounds of Stainless Steel media into the tumbler, fill with 1 gallon of cold water, and add up to 2 pounds of brass and a couple teaspoons of dish washing detergent. The tumbler usually needs about 3-4 hours to completely clean the brass. Remove brass from solution, rinse with cold water and dry. Once finished, your brass will be cleaned inside and out, even in the primer pocket. For additional shine on your brass, tumble them for a short time in a standard vibratory tumbler with corncob media and polish.
519.9 519.9 1 CHF
N. prodotto: 749012773
SINCLAIR INTERNATIONAL STAINLESS STEEL TUMBLING KIT, 110V Il Kit Tumbling Sinclair in acciaio inox dispone su Thumler bicchieri modello "B" da 15 lb bicchiere e 5 libbre di acciaio inossidabile burattatura media. Questo kit può gestire fino a 2 libbre di ottone ed è progettato per uso di barilatura bagnato. NON ASCIUGARE TUMBLE!!! Mettere i 5 chili di supporti in acciaio inox nel bicchiere, riempire con 1 gallone di acqua fredda e aggiungere fino a 2 libbre di ottone e un paio cucchiaini di detersivo per piatti di lavaggio. Il bicchiere ha bisogno solitamente circa 3-4 ore per pulire completamente l'ottone. Rimuovere ottone dalla soluzione, sciacquare con acqua fredda e asciugare. Una volta finito, vostro ottone sarà ripulita dentro e fuori, anche nella tasca del primer. Per ulteriore lustro sul vostro ottone, tumble li per breve tempo in un bicchiere standard vibrante con media tutolo e lucidare.
519.9 CHF 0 CHF 519.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche

Peso della spedizione: 9.346kg

Dettagli dell'elemento

Made in Usa



The Sinclair Stainless Steel Tumbling Kit features Thumler’s Tumblers Model “B” 15 lb. tumbler and 5 lbs. of Stainless Steel tumbling media. This kit can handle up to 2 pounds of brass and is designed for wet tumbling use. DO NOT DRY TUMBLE!!!! Put the 5 pounds of Stainless Steel media into the tumbler, fill with 1 gallon of cold water, and add up to 2 pounds of brass and a couple teaspoons of dish washing detergent. The tumbler usually needs about 3-4 hours to completely clean the brass. Remove brass from solution, rinse with cold water and dry. Once finished, your brass will be cleaned inside and out, even in the primer pocket. For additional shine on your brass, tumble them for a short time in a standard vibratory tumbler with corncob media and polish.
Newsletter