Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz
513030740
Alter Choke Constriction Without Changing The Choke
High-quality reamer made by Dave Manson. Lets you easily add some choke constriction to a shortened or standard length barrel without threading or altering the actual choke. Just stop reaming 2" to 3" short of the muzzle and the difference in diameter between the bore and the muzzle is the degree of choke. Tightens chokes on barrels that are too thin for screw-in tubes. Plus, full-length back boring can restore the interior surface of rusted and pitted barrels to "like new" far more quickly than polishing or stoning.

SPECS: M7 high speed steel. 5" (12.7cm) long with eight straight flutes. 12 gauge only.

234.9 234.9 1 CHF
Artikel-Nr.: 513030740
MANSON PRECISION .740" 12 GA. REAMER
Herstellerproduktnummer: BR12GA740 Hochwertige Reibahle von Dave Manson. Ermöglicht das einfache Hinzufügen einer Drosselverengung zu einem Lauf mit verkürzter oder standardmässiger Länge, ohne die eigentliche Drossel einfädeln oder verändern zu müssen. Hören Sie einfach auf, 2 bis 3 Zoll vor der Mündung zu reiben, und der Unterschied im Durchmesser zwischen Bohrung und Mündung ist der Grad der Drossel. Spannt Drosseln an Fässern, die für Einschraubrohre zu dünn sind. Durch das Bohren über die gesamte Länge des Rückens kann die Innenoberfläche von verrosteten und narbigen Fässern viel schneller "wie neu" sein als beim Polieren oder Steinigen.
234.9 CHF 0 CHF 234.90 *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften: Art: Back Bore Patrone: 12 Gauge

Eigenschaften

Art: Back Bore Patrone: 12 Gauge Versandgewicht: 0.159kg Versandhöhe: 28mm Versandbreite: 28mm Versandlänge: 155mm

Artikeldetails

Made in USA



Alter Choke Constriction Without Changing The Choke
High-quality reamer made by Dave Manson. Lets you easily add some choke constriction to a shortened or standard length barrel without threading or altering the actual choke. Just stop reaming 2" to 3" short of the muzzle and the difference in diameter between the bore and the muzzle is the degree of choke. Tightens chokes on barrels that are too thin for screw-in tubes. Plus, full-length back boring can restore the interior surface of rusted and pitted barrels to "like new" far more quickly than polishing or stoning.

SPECS: M7 high speed steel. 5" (12.7cm) long with eight straight flutes. 12 gauge only.

Newsletter