Saves the frustration of trying to get the factory spring s crook back into the receiver. Fits all AK-47 and SAR-3 receivers.
SPECS: Steel, black, matte finish.
Mehr...
Clean Breaking Trigger verbessert die Leistung
Spart die Frustration, wenn versucht wird, den Krummkopf der Werksfeder wieder in den Empfänger zu stecken. Passend für alle AK-47 und SAR-3 Empfänger.
Technische Daten: Stahl, schwarz, mattes Finish.
Mehr...
Kundenbewertungen zu POWER CUSTOM TRIGGER PIN RETAINER PLATE
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4.8
great product(12.07.2010)
Just likethe Krebs Custom retaining plate, and now you don't have to fool with that awful shephards crook. 5 second install, and much stronger than the factory thin wire, in most AK variants.
POWER CUSTOM TRIGGER PIN RETAINER PLATE(28.02.2011)
Works great, easier to install than Tapco or that darn spring, might save you a minute's fooling around. But 2 1/2 times as expensive?
worked and fit well on my mak 90(17.10.2012)
Slipped right in with the tapco double hook trigger group. Did it job of locking the pin in well. Easy to install and well built quality product.
works great, highly recommend(05.02.2013)
Works great and installs with no effort. Safety lever holds it in place. Very nice.
Good stuff. Fits Russian Saiga MK-03(27.05.2013)
Purchased it for my Saiga MK-03. Installation takes 3 min. Works well - similar to the stock spring, but now it is much easier to assembly/disassembly trigger group.
One of the greatest things ever made!!!(08.06.2013)
I will always buy one of these retainers before every build! The only negative was that I had to use a dremel to cut out a notch after adding a side mount for a scope. It would really be great if the notch that I had to add was already cut in so that I didn't have to do it!
Fitting needed for Yugos(11.12.2017)
I installed this in my M92 PAP pistol. I had to file the notch for the trigger pin larger due to the distance between the trigger pin and safety selector hole being longer than designed. Overall good product but there might be a better part on the market for Yugos.
AK retaainer works perfect(31.01.2018)
Works just as described and super simple installation. This part really makes assembly of the AK fire control group a snap.
Fits my O-PAP(10.04.2018)
I put this in my Yugo O-Pap and it didnt appear to need any fitting. It went right in and appears to be working as designed.
Artikel-Nr.: 713000017 POWER CUSTOM TRIGGER PIN RETAINER PLATE Herstellerproduktnummer: NONE Spart die Frustration, wenn versucht wird, den Krummkopf der Werksfeder wieder in den Empfänger zu stecken. Passend für alle AK-47 und SAR-3 Empfänger.
Made in USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Saves the frustration of trying to get the factory spring s crook back into the receiver. Fits all AK-47 and SAR-3 receivers.
SPECS: Steel, black, matte finish.
Mehr...
Clean Breaking Trigger verbessert die Leistung
Spart die Frustration, wenn versucht wird, den Krummkopf der Werksfeder wieder in den Empfänger zu stecken. Passend für alle AK-47 und SAR-3 Empfänger.
Technische Daten: Stahl, schwarz, mattes Finish.
Mehr...
Kundenbewertungen zu POWER CUSTOM TRIGGER PIN RETAINER PLATE
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4.8
great product(12.07.2010)
Just likethe Krebs Custom retaining plate, and now you don't have to fool with that awful shephards crook. 5 second install, and much stronger than the factory thin wire, in most AK variants.
POWER CUSTOM TRIGGER PIN RETAINER PLATE(28.02.2011)
Works great, easier to install than Tapco or that darn spring, might save you a minute's fooling around. But 2 1/2 times as expensive?
worked and fit well on my mak 90(17.10.2012)
Slipped right in with the tapco double hook trigger group. Did it job of locking the pin in well. Easy to install and well built quality product.
works great, highly recommend(05.02.2013)
Works great and installs with no effort. Safety lever holds it in place. Very nice.
Good stuff. Fits Russian Saiga MK-03(27.05.2013)
Purchased it for my Saiga MK-03. Installation takes 3 min. Works well - similar to the stock spring, but now it is much easier to assembly/disassembly trigger group.
One of the greatest things ever made!!!(08.06.2013)
I will always buy one of these retainers before every build! The only negative was that I had to use a dremel to cut out a notch after adding a side mount for a scope. It would really be great if the notch that I had to add was already cut in so that I didn't have to do it!
Fitting needed for Yugos(11.12.2017)
I installed this in my M92 PAP pistol. I had to file the notch for the trigger pin larger due to the distance between the trigger pin and safety selector hole being longer than designed. Overall good product but there might be a better part on the market for Yugos.
AK retaainer works perfect(31.01.2018)
Works just as described and super simple installation. This part really makes assembly of the AK fire control group a snap.
Fits my O-PAP(10.04.2018)
I put this in my Yugo O-Pap and it didnt appear to need any fitting. It went right in and appears to be working as designed.