Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz
749005806
Davidson Action Wrenches are designed for the switch barrel shooter with a custom built rifle. Manufactured from 7075-T6 aluminum, these tools are not designed to remove factory installed barrels. Action wrenches are used to break the action free from the barrel while the barrel is held in a barrel vise. This allows the shooter to change barrels in a matter of a few minutes. All rear action wrenches are inserted through the rear of the action and have a 3/4 inch hex end which requires a wrench for turning. Port wrenches are inserted through the action port and are turned by hand. Barrel Vise available separately.
144.9 144.9 1 CHF
Artikel-Nr.: 749005806
DAVIDSON PORT ACTION WRENCH -STOLLE NESIKA BAY (RH)
Herstellerproduktnummer: DW-4 Davidson Action Wrenches wurden für den Schaltrohrschützen mit einem speziell angefertigten Gewehr entwickelt. Diese aus 7075-T6 Aluminium gefertigten Werkzeuge sind nicht zum Entfernen von werkseitig installierten Fässern vorgesehen. Action-Schraubenschlüssel werden verwendet, um die Action aus dem Lauf zu lösen, während der Lauf in einem Laufschraubstock gehalten wird. So kann der Schütze innerhalb weniger Minuten die Fässer wechseln. Alle hinteren Maulschlüssel werden durch das hintere Ende des Maulschlüssels eingeführt und haben ein 3/4-Zoll-Sechskantende, für das ein Maulschlüssel zum Drehen erforderlich ist. Portschlüssel werden durch den Action-Port gesteckt und von Hand gedreht. Laufschraubstock separat erhältlich.
144.9 CHF 3 CHF 144.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Hand: Right

Eigenschaften

Hand: Right Versandgewicht: 0.363kg Versandhöhe: 18mm Versandbreite: 43mm Versandlänge: 23mm

Artikeldetails

Made in USA



Davidson Action Wrenches are designed for the switch barrel shooter with a custom built rifle. Manufactured from 7075-T6 aluminum, these tools are not designed to remove factory installed barrels. Action wrenches are used to break the action free from the barrel while the barrel is held in a barrel vise. This allows the shooter to change barrels in a matter of a few minutes. All rear action wrenches are inserted through the rear of the action and have a 3/4 inch hex end which requires a wrench for turning. Port wrenches are inserted through the action port and are turned by hand. Barrel Vise available separately.
Newsletter