Convenient “Go/No-Go” gauge lets you quickly and accurately check for correct feed lip gap. Helps ensure reliable feeding and prevent weapon failure caused by feed problems. Simply slip over the back of a suspect magazine and lightly press gauge between magazine feed lips. If the gauge passes through feed lips, either discard that magazine or use the Brownells Magazine Feed Lip Tool (available separately) to bring them back into specs and restore reliable feeds. If the gauge won’t pass through the lips, the gap is too narrow and must be widened. Machined from 4140 chrome-moly steel heat hardened to Rc 50-55 for dimensional stability, plus resistance to wear and corrosion.
SPECS: 4140 chrome-moly heat treated steel, in-the-white. Rc 52-60. Go: .454" No-Go: .476". For use on standard .223/5.56mm magazines only.
Mehr...
Stellen Sie die richtigen Spezifikationen für eine zuverlässige Munitionszufuhr sicher
Mit der praktischen „Go / No-Go“ -Anzeige können Sie schnell und genau prüfen, ob der Lippenspalt korrekt ist. Hilft bei der sicheren Fütterung und beugt Waffenausfällen durch Futterprobleme vor. Gleiten Sie einfach über die Rückseite eines verdächtigen Magazins und drücken Sie leicht auf die Lehre zwischen den Magazinzuführlippen. Wenn das Messgerät die Einzugslippen passiert, entsorgen Sie entweder dieses Magazin oder verwenden Sie das Brownells Magazine Feed Lip Tool (separat erhältlich), um sie wieder in die Spezifikationen zu bringen und zuverlässige Zuführungen wiederherzustellen. Wenn die Lehre nicht durch die Lippen geht, ist der Spalt zu schmal und muss vergrössert werden. Gefräst aus 4140 Chrom-Moly-Stahl, wärmegehärtet auf Rc 50-55 für Dimensionsstabilität sowie Verschleiss- und Korrosionsbeständigkeit.
SPEZIFIKATIONEN: 4140 chrom-moly wärmebehandelter Stahl, im Weiss. RC 52-60. Go: .454 "No-Go: .476". Nur zur Verwendung mit Standardmagazinen der Grösse .223 / 5.56mm.
Mehr...
Kundenbewertungen zu BROWNELLS AR-15 MAGAZINE LIP GAUGE
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 4
Easy to use field gauge for STANAG magaz(14.07.2012)
This feedlip gauge is based on the gauge developed by the US Army. The drawing and dimensions for the gauge are available online so you could make your own using the right machine shop. The gauge essentially starts with a large dimension (marked NO GO) which tapers down to a smaller dimension (marked GO). If the smaller dimension (GO) fits through the feedlips but stops before the larger dimension slips through, this magazine is good. If the larger dimension fits right through the feed lips, the lips need to be adjusted down to tighten that clearance.
I had two Bravo Company Teflon coated magazines give me issues at the range. They were difficult to load using the MagLula and often did not want to feed the first round into the chamber. The cartridges felt very tight in the magazine. I gauged these mags and found the feedlips to barely allow the GO gauge to slip through. The best magazines I own are a set of dry-film D&H Industries magazines and their feedlips barely allowed the NO GO portion to fit through, so the lips were essentially getting close to being loose.
Overall: 4/5 stars, kind of pricey but it is an easy way to check the feed lips on your magazines. I was able to identify the tight magazines and fix them using the Brownells feed lip tool.
Artikel-Nr.: 080000744 BROWNELLS AR-15 MAGAZINE LIP GAUGE050806109902 Mit der praktischen „Go / No-Go“ -Anzeige können Sie schnell und genau prüfen, ob der Lippenspalt korrekt ist. Hilft bei der sicheren Fütterung und beugt Waffenausfällen durch Futterprobleme vor. Gleiten Sie einfach über die Rückseite eines verdächtigen Magazins und drücken Sie leicht auf die Lehre zwischen den Magazinzuführlippen. Wenn das Messgerät die Einzugslippen passiert, entsorgen Sie entweder dieses Magazin oder verwenden Sie das Brownells Magazine Feed Lip Tool (separat erhältlich), um sie wieder in die Spezifikationen zu bringen und zuverlässige Zuführungen wiederherzustellen. Wenn die Lehre nicht durch die Lippen geht, ist der Spalt zu schmal und muss vergrössert werden. Gefräst aus 4140 Chrom-Moly-Stahl, wärmegehärtet auf Rc 50-55 für Dimensionsstabilität sowie Verschleiss- und Korrosionsbeständigkeit.
Convenient “Go/No-Go” gauge lets you quickly and accurately check for correct feed lip gap. Helps ensure reliable feeding and prevent weapon failure caused by feed problems. Simply slip over the back of a suspect magazine and lightly press gauge between magazine feed lips. If the gauge passes through feed lips, either discard that magazine or use the Brownells Magazine Feed Lip Tool (available separately) to bring them back into specs and restore reliable feeds. If the gauge won’t pass through the lips, the gap is too narrow and must be widened. Machined from 4140 chrome-moly steel heat hardened to Rc 50-55 for dimensional stability, plus resistance to wear and corrosion.
SPECS: 4140 chrome-moly heat treated steel, in-the-white. Rc 52-60. Go: .454" No-Go: .476". For use on standard .223/5.56mm magazines only.
Mehr...
Stellen Sie die richtigen Spezifikationen für eine zuverlässige Munitionszufuhr sicher
Mit der praktischen „Go / No-Go“ -Anzeige können Sie schnell und genau prüfen, ob der Lippenspalt korrekt ist. Hilft bei der sicheren Fütterung und beugt Waffenausfällen durch Futterprobleme vor. Gleiten Sie einfach über die Rückseite eines verdächtigen Magazins und drücken Sie leicht auf die Lehre zwischen den Magazinzuführlippen. Wenn das Messgerät die Einzugslippen passiert, entsorgen Sie entweder dieses Magazin oder verwenden Sie das Brownells Magazine Feed Lip Tool (separat erhältlich), um sie wieder in die Spezifikationen zu bringen und zuverlässige Zuführungen wiederherzustellen. Wenn die Lehre nicht durch die Lippen geht, ist der Spalt zu schmal und muss vergrössert werden. Gefräst aus 4140 Chrom-Moly-Stahl, wärmegehärtet auf Rc 50-55 für Dimensionsstabilität sowie Verschleiss- und Korrosionsbeständigkeit.
SPEZIFIKATIONEN: 4140 chrom-moly wärmebehandelter Stahl, im Weiss. RC 52-60. Go: .454 "No-Go: .476". Nur zur Verwendung mit Standardmagazinen der Grösse .223 / 5.56mm.
Mehr...
Kundenbewertungen zu BROWNELLS AR-15 MAGAZINE LIP GAUGE
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 4
Easy to use field gauge for STANAG magaz(14.07.2012)
This feedlip gauge is based on the gauge developed by the US Army. The drawing and dimensions for the gauge are available online so you could make your own using the right machine shop. The gauge essentially starts with a large dimension (marked NO GO) which tapers down to a smaller dimension (marked GO). If the smaller dimension (GO) fits through the feedlips but stops before the larger dimension slips through, this magazine is good. If the larger dimension fits right through the feed lips, the lips need to be adjusted down to tighten that clearance.
I had two Bravo Company Teflon coated magazines give me issues at the range. They were difficult to load using the MagLula and often did not want to feed the first round into the chamber. The cartridges felt very tight in the magazine. I gauged these mags and found the feedlips to barely allow the GO gauge to slip through. The best magazines I own are a set of dry-film D&H Industries magazines and their feedlips barely allowed the NO GO portion to fit through, so the lips were essentially getting close to being loose.
Overall: 4/5 stars, kind of pricey but it is an easy way to check the feed lips on your magazines. I was able to identify the tight magazines and fix them using the Brownells feed lip tool.