Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

ULTIMAK
AK SCOUT MOUNT MODEL M2-B

100002177
Mount Picatinny Accessories For Mission-Specific Needs
The M2-B has a Picatinny style rail positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. (with vent holes, as found mostly on Chinese AKs) Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions.  No Gunsmithing.  Made in U.S.A.

SPECS: Scout Mount – 6061-T6 hard anodized aluminum, 4140 steel mounting clamps, matte black. 6.7" (17cm) long. Fits 7.62x39 caliber rifles that have original gas tubes with side gas port holes as found mostly on Chinese AKs.

159.9 159.9 1 CHF
Artikel-Nr.: 100002177
ULTIMAK AK-47 SCOUT MOUNT
Herstellerproduktnummer: M2B Der M2-B verfügt über eine Picatinny-Schiene, die weit unterhalb der Visierachse aus Eisen positioniert ist. Dies macht ihn zur niedrigsten Optikhalterung, die für den AK erhältlich ist. Mit einem tief montierten Rohrvisier können Sie Ihre Optik ohne Kamm-Riser verwenden und dennoch Ihren regulären Griff verwenden. Das System ermöglicht das Miterleben (die Möglichkeit, Ihre Eisenvisiere durch ein 1-fach-Visier als Ersatzvisiersystem zu verwenden), wenn es mit einem Rohrreflexvisier verwendet wird. Diese Hochleistungshalterung ersetzt das originale Gasrohr und den oberen Handschutz aus Stahl und erhöht somit das Gewicht des Gewehrs um weniger als eine Unze. Damit ist sie die mit Abstand leichteste Optikhalterungsinstallation der Welt. Durch die Vorwärtspositionierung der Optik können Sie schneller, einfacher und natürlicher zielen und behalten dabei Ihr volles Sichtfeld. Mehrere oder sich bewegende Ziele mit offenen Augen werden zur zweiten Natur. Die Halterung muss selten oder nie entfernt werden, um das Gewehr zu reinigen, sodass Sie sich keine Sorgen um den Verlust von Null machen müssen. Da die Halterung am Lauf festgeklemmt ist und sich nicht wie beim ursprünglichen Gasrohr zwischen dem Gasblock und dem Sichtblock verklemmt, haben mehrere UltiMAK-Benutzer eine Verbesserung der Genauigkeit ihrer AKs gemeldet. Die UltiMAK-Optikhalterung wurde für die Kompatibilität mit einer Vielzahl von AK-Gewehrvarianten entwickelt. Wenn Sie ein AK-Kaliber 7,62 x 39 mit Standardgewicht und einem abnehmbaren Gasschlauch in Standardlänge (ca. 17,7 cm Gesamtlänge) haben, sollte die Halterung gut passen. Wir haben noch kein Gewehr der obigen Beschreibung gefunden, für das unsere Montierung nicht passt, vorausgesetzt, das Gewehr ist einigermassen gerade montiert. Einige AKs haben im Vergleich zum Visierblock eine radikale Fehlausrichtung der Gasblöcke. In seltenen Fällen kann dies zu Problemen bei der Installation des UltiMAK Mount führen. (mit Belüftungslöchern, wie sie meistens bei chinesischen AKs zu finden sind) Ersetzt den Gasschlauch. Klemmt direkt am Lauf für maximale Stabilität und Genauigkeit. Massives, einteiliges 6061-T6-Gehäuse aus harteloxiertem Aluminium.Kommt mit 4140 Stahlklammern, Schrauben, Inbusschlüssel und Anleitung. Kein Büchsenmacher. Hergestellt in den USA.
159.9 CHF 7 CHF 159.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Tactical Bases Basenanzahl: 1-Piece Farbe: Matte Black Hersteller/Modell: AK-47 Material: Aluminum

Eigenschaften

Art: Tactical Bases Basenanzahl: 1-Piece Farbe: Matte Black Hersteller/Modell: AK-47 Material: Aluminum Versandgewicht: 0.227kg Versandhöhe: 20mm Versandbreite: 145mm Versandlänge: 254mm

Artikeldetails

Made in USA



Mount Picatinny Accessories For Mission-Specific Needs
The M2-B has a Picatinny style rail positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. (with vent holes, as found mostly on Chinese AKs) Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions.  No Gunsmithing.  Made in U.S.A.

SPECS: Scout Mount – 6061-T6 hard anodized aluminum, 4140 steel mounting clamps, matte black. 6.7" (17cm) long. Fits 7.62x39 caliber rifles that have original gas tubes with side gas port holes as found mostly on Chinese AKs.

Newsletter