The RCBS Uniflow Powder Measure will throw consistently accurate charges by volume with all types of smokeless powder. The straight forward measuring cylinder design helps eliminate powder hang ups which can lead to double charges or overcharges. The numbered measuring screw changes easily from charge to charge, and enables you to go back to a known charge at a later date. The precision ground cylinder is honed main casting produce a smooth and accurate powder dispensing system. Mount is a standard 7/8 to fourteen thread, comes with a bench or shelf bracket and two drop tubes for 22 caliber and up. Mounts on the RCBS Powder Measure or the Sinclair Powder Measure Stand (11-1200), accepts Sinclair Drop Tubes with a Sinclair Adapter. DO NOT USE WITH BLACK POWDER.
Mehr...
Das RCBS Uniflow Powder Measure wirft mit allen Arten von rauchlosem Pulver gleichbleibend genaue Volumenladungen. Das geradlinige Design des Messzylinders verhindert das Aufhängen von Pulver, das zu doppelten Aufladungen oder Überladungen führen kann. Die nummerierte Messschraube ändert sich leicht von Ladung zu Ladung und ermöglicht es Ihnen, zu einem späteren Zeitpunkt auf eine bekannte Ladung zurückzugreifen. Der präzisionsgeschliffene Zylinder ist ein geschliffenes Hauptgussprodukt, das ein gleichmässiges und genaues Pulverausgabesystem ergibt. Die Halterung ist ein Standardgewinde mit 7/8 bis 14 Gewinden und wird mit einer Bank- oder Regalhalterung und zwei Fallrohren für Kaliber 22 und mehr geliefert. Zur Befestigung am RCBS Powder Measure oder am Sinclair Powder Measure Stand (11-1200), zur Aufnahme von Sinclair Drop Tubes mit Sinclair Adapter. NICHT MIT SCHWARZEM PULVER VERWENDEN.
Mehr...
Kundenbewertungen zu RCBS UNIFLOW POWDER MEASURE DROP TUBE 17 TO 20 CAL
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4.9
Helps a basic measure be more uniform.(07.04.2014)
I find this product a very inexpensive valuable upgrade.
The down side is you need to build or create a contraption to remove it for cleaning when changing powders. Or you could just unscrew the powder measure from its mount and dump it upside down and let it fall out.
It is kind of a mystery why this item is not included with the measure.
Solves powder flow issues(27.10.2015)
As a picky reloader, I try to exclude as many variables as possible from my reloading so that I am consistent across the board with my ammunition. By keeping the gravity feed pressure constant on the metering unit, the powder baffle allows more uniform powder charges. It also can help to keep powder (flake especially) from forming small clumps in humid weather.
The baffle has a hole in the center where the powder drains through. When you are done with that particular powder, or desire to remove the baffle for any reason, you can make an "L" shaped hook and lift the baffle out. As one reviewer pointed out, perhaps it should come with one, but a piece of 10 gauge copper wire solved the matter for me.
Great powder measure(09.02.2011)
I have had this measure for a long time. It does ball powder perfectly, not even a .05 grain variance. Extruded powders, and pistol flake powders are almost always within .1 grain up or down.
My Recommendation(21.01.2012)
I've been using one of these for years and swear by it. I've also used measures that cost twice as much, and this does the same job.
Excellent, but NOT for pistol as-sold(24.09.2012)
RCBS sells two versions of the Uniflow, one for rifle and one for pistol. HOWEVER, Brownells only sells the one with the rifle cylinder, and that is bad news for pistol reloaders, since charges down around 4 grains and less become increasingly variable. A charge setting for 3.5 grains will throw from 3 to 4 grains.
Size matters!(01.02.2012)
First, this item comes in two sizes, 0.500 and 0.685 diameter. This ad doesn't tell you which size you're getting. They both cost the same.
Second, the micrometer insert has been a great addition to my Uniflo Powder Measure. There has been a slight amount of trouble measuring very small powder charges, such as for a .380 Auto, a 9mm Luger, or a .38 Special. The Uniflo doesn't like such a small volume above the insert. There is also the standard problem of measuring flake powder by volume instead of by weight, but you'll get that problem in any volume powder dispenser.
I should have bought this baby much sooner!
wish i would have bought this long ago(05.07.2012)
Artikel-Nr.: 100010301 RCBS UNIFLOW POWDER MEASURE DROP TUBE 17 TO 20 CAL Herstellerproduktnummer: 9028076683090287 Das RCBS Uniflow Powder Measure wirft mit allen Arten von rauchlosem Pulver gleichbleibend genaue Volumenladungen. Das geradlinige Design des Messzylinders verhindert das Aufhängen von Pulver, das zu doppelten Aufladungen oder Überladungen führen kann. Die nummerierte Messschraube ändert sich leicht von Ladung zu Ladung und ermöglicht es Ihnen, zu einem späteren Zeitpunkt auf eine bekannte Ladung zurückzugreifen. Der präzisionsgeschliffene Zylinder ist ein geschliffenes Hauptgussprodukt, das ein gleichmässiges und genaues Pulverausgabesystem ergibt. Die Halterung ist ein Standardgewinde mit 7/8 bis 14 Gewinden und wird mit einer Bank- oder Regalhalterung und zwei Fallrohren für Kaliber 22 und mehr geliefert. Zur Befestigung am RCBS Powder Measure oder am Sinclair Powder Measure Stand (11-1200), zur Aufnahme von Sinclair Drop Tubes mit Sinclair Adapter. NICHT MIT SCHWARZEM PULVER VERWENDEN.
Artikel-Nr.: 100010300 RCBS UNIFLOW POWDER MEASURE POWDER BAFFLE Herstellerproduktnummer: 90225076683902252 Das RCBS Uniflow Powder Measure wirft mit allen Arten von rauchlosem Pulver gleichbleibend genaue Volumenladungen. Das geradlinige Design des Messzylinders verhindert das Aufhängen von Pulver, das zu doppelten Aufladungen oder Überladungen führen kann. Die nummerierte Messschraube ändert sich leicht von Ladung zu Ladung und ermöglicht es Ihnen, zu einem späteren Zeitpunkt auf eine bekannte Ladung zurückzugreifen. Der präzisionsgeschliffene Zylinder ist ein geschliffenes Hauptgussprodukt, das ein gleichmässiges und genaues Pulverausgabesystem ergibt. Die Halterung ist ein Standardgewinde mit 7/8 bis 14 Gewinden und wird mit einer Bank- oder Regalhalterung und zwei Fallrohren für Kaliber 22 und mehr geliefert. Zur Befestigung am RCBS Powder Measure oder am Sinclair Powder Measure Stand (11-1200), zur Aufnahme von Sinclair Drop Tubes mit Sinclair Adapter. NICHT MIT SCHWARZEM PULVER VERWENDEN.
The RCBS Uniflow Powder Measure will throw consistently accurate charges by volume with all types of smokeless powder. The straight forward measuring cylinder design helps eliminate powder hang ups which can lead to double charges or overcharges. The numbered measuring screw changes easily from charge to charge, and enables you to go back to a known charge at a later date. The precision ground cylinder is honed main casting produce a smooth and accurate powder dispensing system. Mount is a standard 7/8 to fourteen thread, comes with a bench or shelf bracket and two drop tubes for 22 caliber and up. Mounts on the RCBS Powder Measure or the Sinclair Powder Measure Stand (11-1200), accepts Sinclair Drop Tubes with a Sinclair Adapter. DO NOT USE WITH BLACK POWDER.
Mehr...
Das RCBS Uniflow Powder Measure wirft mit allen Arten von rauchlosem Pulver gleichbleibend genaue Volumenladungen. Das geradlinige Design des Messzylinders verhindert das Aufhängen von Pulver, das zu doppelten Aufladungen oder Überladungen führen kann. Die nummerierte Messschraube ändert sich leicht von Ladung zu Ladung und ermöglicht es Ihnen, zu einem späteren Zeitpunkt auf eine bekannte Ladung zurückzugreifen. Der präzisionsgeschliffene Zylinder ist ein geschliffenes Hauptgussprodukt, das ein gleichmässiges und genaues Pulverausgabesystem ergibt. Die Halterung ist ein Standardgewinde mit 7/8 bis 14 Gewinden und wird mit einer Bank- oder Regalhalterung und zwei Fallrohren für Kaliber 22 und mehr geliefert. Zur Befestigung am RCBS Powder Measure oder am Sinclair Powder Measure Stand (11-1200), zur Aufnahme von Sinclair Drop Tubes mit Sinclair Adapter. NICHT MIT SCHWARZEM PULVER VERWENDEN.
Mehr...
Kundenbewertungen zu RCBS UNIFLOW POWDER MEASURE DROP TUBE 17 TO 20 CAL
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4.9
Helps a basic measure be more uniform.(07.04.2014)
I find this product a very inexpensive valuable upgrade.
The down side is you need to build or create a contraption to remove it for cleaning when changing powders. Or you could just unscrew the powder measure from its mount and dump it upside down and let it fall out.
It is kind of a mystery why this item is not included with the measure.
Solves powder flow issues(27.10.2015)
As a picky reloader, I try to exclude as many variables as possible from my reloading so that I am consistent across the board with my ammunition. By keeping the gravity feed pressure constant on the metering unit, the powder baffle allows more uniform powder charges. It also can help to keep powder (flake especially) from forming small clumps in humid weather.
The baffle has a hole in the center where the powder drains through. When you are done with that particular powder, or desire to remove the baffle for any reason, you can make an "L" shaped hook and lift the baffle out. As one reviewer pointed out, perhaps it should come with one, but a piece of 10 gauge copper wire solved the matter for me.
Great powder measure(09.02.2011)
I have had this measure for a long time. It does ball powder perfectly, not even a .05 grain variance. Extruded powders, and pistol flake powders are almost always within .1 grain up or down.
My Recommendation(21.01.2012)
I've been using one of these for years and swear by it. I've also used measures that cost twice as much, and this does the same job.
Excellent, but NOT for pistol as-sold(24.09.2012)
RCBS sells two versions of the Uniflow, one for rifle and one for pistol. HOWEVER, Brownells only sells the one with the rifle cylinder, and that is bad news for pistol reloaders, since charges down around 4 grains and less become increasingly variable. A charge setting for 3.5 grains will throw from 3 to 4 grains.
Size matters!(01.02.2012)
First, this item comes in two sizes, 0.500 and 0.685 diameter. This ad doesn't tell you which size you're getting. They both cost the same.
Second, the micrometer insert has been a great addition to my Uniflo Powder Measure. There has been a slight amount of trouble measuring very small powder charges, such as for a .380 Auto, a 9mm Luger, or a .38 Special. The Uniflo doesn't like such a small volume above the insert. There is also the standard problem of measuring flake powder by volume instead of by weight, but you'll get that problem in any volume powder dispenser.
I should have bought this baby much sooner!
wish i would have bought this long ago(05.07.2012)