Locates Receiver Between Centers For Facing Off & Contouring
Precision-machined to correctly center the receiver for lathe turning - ensures that receiver ring and threads will be square. Lets you use a tool-post grinder for fast, accurate recontouring of external surfaces - like removing a Mauser's charger guide.
SPECS: 12-3/8" (31.34cm) long. 1½" lb. (.68kg). Steel. Models for Small Ring Mauser (SR), Large Ring Mauser (LR),03 Springfield (SP), Rem, 7000 (700)and Win. Model 70 (70).
Plus...
Localise le récepteur entre centres de face & minceur
Précision pour centrer correctement le récepteur pour le tournage de la tour - assure que les threads et anneau récepteur sera carrés. Vous permet d'utiliser une ponceuse outil-post pour rapides et précises de remodelage des surfaces extérieures - comme retrait guide du chargeur d'un Mauser.
Fiche : 12-3/8"(31,34 cm) long. 1½" lb (.68kg). En acier. Modèles pour03 Springfield (SP), Rem, 7000 (700) de la petite bague Mauser (SR), grande bague Mauser (LR),et victoire. Modèle 70 (70).
Plus...
Évaluations client de BROWNELLS "70" FACING MANDREL
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Nice equipment(06.08.2009)
This worked well when blueprinting my action. The 338 Ultra mag Built shot a 0.268 group with 250 grain Lapua bullets and a healthy load of N560. nice for a hunting gun and have the pictures to prove it. would buy again.
Anderson Services Gunsmith Prefered!(11.01.2010)
Purchased as a replacement to our old one that had seen decades of use and abuse. Only used it once but knowing Brownells quality we fully expect a few more decades out of this new one.
Used with a VZ 24 Mauser(15.08.2015)
As received the Facing Mandrel was 14 3/8 inch long. The receiver side dia was 0.7018 and 10 in long. the threads fit the LRM receiver and the shaft fit snugly. The dia of the shaft outside the receiver was 0.7518 and was 4 inch long with two flats. The ends have a center tap hole for turning on center. Works great for facing a LRM with a lath. Do not know if the Mason receiver facing cutter works on this shaft dia of 0.7518 in. I would give 5 stars if Bownells had a facing tool or it was made to be used with the Mason face cutting tool.
Référence: 080098070 BROWNELLS "70" FACING MANDREL Précision pour centrer correctement le récepteur pour le tournage de la tour - assure que les threads et anneau récepteur sera carrés. Vous permet d'utiliser une ponceuse outil-post pour rapides et précises de remodelage des surfaces extérieures - comme retrait guide du chargeur d'un Mauser.
79.9CHF0CHF 79.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 080098001 BROWNELLS MAUSER LARGE RING FACING MANDREL050806108684 Précision pour centrer correctement le récepteur pour le tournage de la tour - assure que les threads et anneau récepteur sera carrés. Vous permet d'utiliser une ponceuse outil-post pour rapides et précises de remodelage des surfaces extérieures - comme retrait guide du chargeur d'un Mauser.
109.9CHF4CHF 109.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Manufacture: MauserModèle: Large Ring
Référence: 080098700 BROWNELLS REMINGTON 700 FACING MANDREL Précision pour centrer correctement le récepteur pour le tournage de la tour - assure que les threads et anneau récepteur sera carrés. Vous permet d'utiliser une ponceuse outil-post pour rapides et précises de remodelage des surfaces extérieures - comme retrait guide du chargeur d'un Mauser.
134.9CHF1CHF 134.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Locates Receiver Between Centers For Facing Off & Contouring
Precision-machined to correctly center the receiver for lathe turning - ensures that receiver ring and threads will be square. Lets you use a tool-post grinder for fast, accurate recontouring of external surfaces - like removing a Mauser's charger guide.
SPECS: 12-3/8" (31.34cm) long. 1½" lb. (.68kg). Steel. Models for Small Ring Mauser (SR), Large Ring Mauser (LR),03 Springfield (SP), Rem, 7000 (700)and Win. Model 70 (70).
Plus...
Localise le récepteur entre centres de face & minceur
Précision pour centrer correctement le récepteur pour le tournage de la tour - assure que les threads et anneau récepteur sera carrés. Vous permet d'utiliser une ponceuse outil-post pour rapides et précises de remodelage des surfaces extérieures - comme retrait guide du chargeur d'un Mauser.
Fiche : 12-3/8"(31,34 cm) long. 1½" lb (.68kg). En acier. Modèles pour03 Springfield (SP), Rem, 7000 (700) de la petite bague Mauser (SR), grande bague Mauser (LR),et victoire. Modèle 70 (70).
Plus...
Évaluations client de BROWNELLS "70" FACING MANDREL
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Nice equipment(06.08.2009)
This worked well when blueprinting my action. The 338 Ultra mag Built shot a 0.268 group with 250 grain Lapua bullets and a healthy load of N560. nice for a hunting gun and have the pictures to prove it. would buy again.
Anderson Services Gunsmith Prefered!(11.01.2010)
Purchased as a replacement to our old one that had seen decades of use and abuse. Only used it once but knowing Brownells quality we fully expect a few more decades out of this new one.
Used with a VZ 24 Mauser(15.08.2015)
As received the Facing Mandrel was 14 3/8 inch long. The receiver side dia was 0.7018 and 10 in long. the threads fit the LRM receiver and the shaft fit snugly. The dia of the shaft outside the receiver was 0.7518 and was 4 inch long with two flats. The ends have a center tap hole for turning on center. Works great for facing a LRM with a lath. Do not know if the Mason receiver facing cutter works on this shaft dia of 0.7518 in. I would give 5 stars if Bownells had a facing tool or it was made to be used with the Mason face cutting tool.