Tough, steel clamp captures the bolt head, and the large-handled turnscrew depresses the ejector so the ejector pin can be safely removed or installed. Set includes turnscrews to fit both Standard and Small bolt faces; also included are separate bolt head retainers. One will fit bolt bodies up to .720" diameter (standard and small bolt face) and the other will fit AR-15/M16 bolts only. Complete AR-15/M16 Bolt Ejector Tool also available separately. Tools work on bolts with plunger-style ejectors and forward-positioned locking lugs only.
SPECS: Steel, blued. Plastic handle. Includes instructions.
Plus...
Élimination plus rapide des éjecteurs de piston-Style
Pince en acier dur, saisit la tête de culasse, et le grandes anses turnscrew déprime l'éjecteur donc la goupille d'éjection peut être retirée ou installée en toute sécurité. L'ensemble inclut turnscrews pour adapter les normes et les petits visages de boulon ; boulon distinct de tête vassaux, sont également inclus. On s'adaptera boulon organes jusqu'à. diamètre 720"(visage de boulon standard et petit) et l'autre seront adaptera AR-15/M16 boulons uniquement. Toutes les AR-15/M16 Bolt Tool éjecteur également disponible séparément. Outils fonctionnent sur les boulons d'éjecteurs de piston-style et positionné avant verrouillage attaches seulement.
Spécifications : acier bleui. Poignée en plastique. Fournit des instructions pour.
Plus...
Évaluations client de BROWNELLS BOLT EJECTOR TOOL SET
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 2.3
not recommended(19.01.2010)
This tool is not recommended for ar bolts. It moves around too much when trying to drive roll pin out and does not secure the bolt .
Great Tool(09.04.2011)
Works exactly as advertised
Economical tool for the job(30.04.2012)
Read the instructions... My only gripe is one thing,"You have to clamp it real good while installing the roll pin.
Needs offset(20.04.2014)
Worked ok, but with AR bolt ejector, would be better if screw in device was offset to engage ejector and not in center.
fell apart(29.09.2014)
The cylinder section in the handle fell out. Seemed like it would work great but I can't tighten the driver part of the tool to depress the ejector.
A disappointment. Failed(01.03.2015)
After 38 years of trying to remove the AR ejector without assistance I finally broke down and purchased this tool. It did not hold up. The jaws bent. The handle separated. It was marginally helpful at best. I upgraded to the more expensive but much better Brownell's ejector tool that can be placed on the bench. The more expensive tool is far superior and makes ejector removal a snap.
Référence: 080792100 BROWNELLS BOLT EJECTOR TOOL SET Pince en acier dur, saisit la tête de culasse, et le grandes anses turnscrew déprime l'éjecteur donc la goupille d'éjection peut être retirée ou installée en toute sécurité. L'ensemble inclut turnscrews pour adapter les normes et les petits visages de boulon ; boulon distinct de tête vassaux, sont également inclus. On s'adaptera boulon organes jusqu'à. diamètre 720"(visage de boulon standard et petit) et l'autre seront adaptera AR-15/M16 boulons uniquement. Toutes les AR-15/M16 Bolt Tool éjecteur également disponible séparément. Outils fonctionnent sur les boulons d'éjecteurs de piston-style et positionné avant verrouillage attaches seulement.
48.9CHF0CHF 48.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 080792002 BROWNELLS AR-15/M16 BOLT EJECTOR TOOL Pince en acier dur, saisit la tête de culasse, et le grandes anses turnscrew déprime l'éjecteur donc la goupille d'éjection peut être retirée ou installée en toute sécurité. L'ensemble inclut turnscrews pour adapter les normes et les petits visages de boulon ; boulon distinct de tête vassaux, sont également inclus. On s'adaptera boulon organes jusqu'à. diamètre 720"(visage de boulon standard et petit) et l'autre seront adaptera AR-15/M16 boulons uniquement. Toutes les AR-15/M16 Bolt Tool éjecteur également disponible séparément. Outils fonctionnent sur les boulons d'éjecteurs de piston-style et positionné avant verrouillage attaches seulement.
29.9CHF0CHF 29.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Tough, steel clamp captures the bolt head, and the large-handled turnscrew depresses the ejector so the ejector pin can be safely removed or installed. Set includes turnscrews to fit both Standard and Small bolt faces; also included are separate bolt head retainers. One will fit bolt bodies up to .720" diameter (standard and small bolt face) and the other will fit AR-15/M16 bolts only. Complete AR-15/M16 Bolt Ejector Tool also available separately. Tools work on bolts with plunger-style ejectors and forward-positioned locking lugs only.
SPECS: Steel, blued. Plastic handle. Includes instructions.
Plus...
Élimination plus rapide des éjecteurs de piston-Style
Pince en acier dur, saisit la tête de culasse, et le grandes anses turnscrew déprime l'éjecteur donc la goupille d'éjection peut être retirée ou installée en toute sécurité. L'ensemble inclut turnscrews pour adapter les normes et les petits visages de boulon ; boulon distinct de tête vassaux, sont également inclus. On s'adaptera boulon organes jusqu'à. diamètre 720"(visage de boulon standard et petit) et l'autre seront adaptera AR-15/M16 boulons uniquement. Toutes les AR-15/M16 Bolt Tool éjecteur également disponible séparément. Outils fonctionnent sur les boulons d'éjecteurs de piston-style et positionné avant verrouillage attaches seulement.
Spécifications : acier bleui. Poignée en plastique. Fournit des instructions pour.
Plus...
Évaluations client de BROWNELLS BOLT EJECTOR TOOL SET
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 2.3
not recommended(19.01.2010)
This tool is not recommended for ar bolts. It moves around too much when trying to drive roll pin out and does not secure the bolt .
Great Tool(09.04.2011)
Works exactly as advertised
Economical tool for the job(30.04.2012)
Read the instructions... My only gripe is one thing,"You have to clamp it real good while installing the roll pin.
Needs offset(20.04.2014)
Worked ok, but with AR bolt ejector, would be better if screw in device was offset to engage ejector and not in center.
fell apart(29.09.2014)
The cylinder section in the handle fell out. Seemed like it would work great but I can't tighten the driver part of the tool to depress the ejector.
A disappointment. Failed(01.03.2015)
After 38 years of trying to remove the AR ejector without assistance I finally broke down and purchased this tool. It did not hold up. The jaws bent. The handle separated. It was marginally helpful at best. I upgraded to the more expensive but much better Brownell's ejector tool that can be placed on the bench. The more expensive tool is far superior and makes ejector removal a snap.