Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
191188610
Favorite Of Professional Stockmakers For Shaping & Finishing
The famous Nicholson Shoemakers' and Patternmakers' Cabinet Rasps made especially for wood filing where a smooth finish is desired. Comes in two cuts, second or smooth, 10" long cutting surface. Rasp is half-round shape, but slightly wider than usual with wider radius also. Edges are cut (have teeth) and taper slightly from tang to front. We have been looking for these for many years at the suggestion of many, many good gunsmith and stockmaker customers and friends. The unusual tooth design eliminates most "filling" problems, does not gouge into wood or snag cross-grain. Probably the most useful wood rasp for "almost final" shaping and finishing. Teeth are coarser than the Wood Files.
SPECS: 12-5/8" (19.0cm) overall length. 7/8" (22.2mm) wide, tapers to 7/16' (11.1mm). #49 is second cut, #50 is smooth cut.
89.9 104.9 2 CHF
Référence: 191188610
APEX TOOL GROUP #50 CABINET RASP
Ref Fabricant: 18861N Le célèbre Nicholson Shoemakers' et modeleurs Cabinet râpes conçues spécialement pour dépôt de bois où une finition lisse est souhaitée. Est disponible en deux coupes, second ou lisses, 10" surface de coupe longue. Râpe est la forme demi-ronde, mais légèrement plus large que d'habitude avec rayon plus grand aussi. Les bords sont coupés (ont les dents) et cône légèrement depuis tang vers l'avant. Nous avons recherché pour ces pendant de nombreuses années à la suggestion de beaucoup, beaucoup de bons clients armurier et stockmaker et les amis. La conception de dent inhabituelle élimine la plupart « remplir » les problèmes, ne gouge dans le bois ou s'accrocher grain croisé. Probablement le plus utile bois râpe pour le façonnage et la finition « presque définitive ». Les dents sont plus grossiers que les fichiers de bois.
104.9 CHF 0 CHF 104.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.136kg Hauteur d'expédition: 8mm Largeur d'expédition: 56mm Longueur d'expédition: 330mm




Référence: 191188460
APEX TOOL GROUP #49 CABINET RASP
Ref Fabricant: 18846N 037103219640 Le célèbre Nicholson Shoemakers' et modeleurs Cabinet râpes conçues spécialement pour dépôt de bois où une finition lisse est souhaitée. Est disponible en deux coupes, second ou lisses, 10" surface de coupe longue. Râpe est la forme demi-ronde, mais légèrement plus large que d'habitude avec rayon plus grand aussi. Les bords sont coupés (ont les dents) et cône légèrement depuis tang vers l'avant. Nous avons recherché pour ces pendant de nombreuses années à la suggestion de beaucoup, beaucoup de bons clients armurier et stockmaker et les amis. La conception de dent inhabituelle élimine la plupart « remplir » les problèmes, ne gouge dans le bois ou s'accrocher grain croisé. Probablement le plus utile bois râpe pour le façonnage et la finition « presque définitive ». Les dents sont plus grossiers que les fichiers de bois.
89.9 CHF 9 CHF 89.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Favorite Of Professional Stockmakers For Shaping & Finishing
The famous Nicholson Shoemakers' and Patternmakers' Cabinet Rasps made especially for wood filing where a smooth finish is desired. Comes in two cuts, second or smooth, 10" long cutting surface. Rasp is half-round shape, but slightly wider than usual with wider radius also. Edges are cut (have teeth) and taper slightly from tang to front. We have been looking for these for many years at the suggestion of many, many good gunsmith and stockmaker customers and friends. The unusual tooth design eliminates most "filling" problems, does not gouge into wood or snag cross-grain. Probably the most useful wood rasp for "almost final" shaping and finishing. Teeth are coarser than the Wood Files.
SPECS: 12-5/8" (19.0cm) overall length. 7/8" (22.2mm) wide, tapers to 7/16' (11.1mm). #49 is second cut, #50 is smooth cut.
Newsletter