Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

J P ENTERPRISES
AR-15/ 308 AR ADJUSTABLE TRIGGER SYSTEM

812872022079 452015000
Smooth, Even Trigger Pull, Precise Letoff; Easy Installation
Easy-to-fit replacement for factory trigger is fully adjustable for engagement and overtravel, and is available with pull weight as light as 3.5 lbs. Redesigned sear geometry and advanced metallurgy result in a precision-ground sear edge that delivers a precise, consistent letoff and prevents the kind of wear that causes doubling and other problems. Extremely short reset enables fast follow-up shots, a critical advantage on tactical and competition rifles. Machined to exceptionally tight tolerances from hardened steel, and installs in minutes with no permanent alterations to the rifle. Lets you upgrade an AR-15 or an AR-style .308 rifle that uses an AR-15 trigger, while keeping your current hammer and pins. Disconnector spring, engagement screw, and overtravel screw are already installed; also includes disconnector, trigger return spring, hammer spring, and .050" hex key. Use with J.P. Enterprises Speed Hammer (available separately) for best performance. Comes with a standard weight hammer spring, for a trigger pull of between 3 and 3.5 lbs.—perfect for competition and recreational shooting—plus a “tactical” spring that gives a 3.5 to 4 lb. for applications demanding a high level of ignition reliability, including police/military use, mil-spec ammunition with hard primers, and in AR-style .308 rifles. JPFC-1 fits rifles with standard .154" diameter trigger/hammer pin holes.

SPECS: Steel, Parkerized finish. Models for rifles with either .154" (military and current aftermarket) or .169" (current Colt) diameter trigger pins. Measure your pins and select the correct kit. Includes complete instructions and a CD-ROM with 35-minute video showing step-by-step installation.

164.9 164.9 1 CHF
Référence: 452015000
J P ENTERPRISES .154" STANDARD 3.5 LB. ADJUSTABLE TRIGGER KIT
Ref Fabricant: JPFC1 812872022079 Remplacement facile-à-adaptent pour déclencheur de l'usine est entièrement réglable pour l'engagement et la marche à vide et est disponible avec pull poids comme lumière que 3,5 lb Redesigned sear géométrie et résultat de métallurgie contour gâchette de précision-terre de pointe qui offre une letoff précise, cohérente et empêche le genre d'usure qui cause des problèmes de doublage et d'autres. Remise à zéro extrêmement courte permet rapidement suivi des plans, un avantage important sur la tactique et compétition fusils. Usinés à titre exceptionnel des tolérances serrées en acier trempé et s'installe en quelques minutes avec aucune modifications permanentes à la carabine. Vous permet de mettre à niveau un AR-15 ou un fusil AR-style 308 qui utilise un déclencheur de l'AR-15, tout en gardant votre marteau actuelle et les épingles. Printemps de sectionneur, engagement vis et vis de surcourse sont déjà installés ; inclut également le sectionneur, déclencher le ressort de rappel, marteau de printemps, et. 050" clé hexadécimale. Utilisation avec J.P. entreprises vitesse marteau (disponible séparément) pour des performances optimales. Est livré avec un ressort de marteau poids standard, pour une détente d'entre 3 et 3,5 lb — parfait pour la compétition et loisir tir — plus une source de « tactique » qui donne un 3,5 à 4 lb pour des applications exigeant un haut niveau de fiabilité de l'allumage, y compris des policiers et militaires l'utilisation, munitions mil-spec avec des amorces durs et dans les fusils AR-style 308. JPFC-1 correspond à fusils avec norme. 154" trous de goupille déclenchement/marteau diamètre.
164.9 CHF 9 CHF 164.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: AR .308 Style: Réglable, Kit

Caractéristiques

Manufacture: AR .308 Style: Réglable,Kit Poids du colis: 0.181kg Hauteur d'expédition: 30mm Largeur d'expédition: 152mm Longueur d'expédition: 218mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c



Smooth, Even Trigger Pull, Precise Letoff; Easy Installation
Easy-to-fit replacement for factory trigger is fully adjustable for engagement and overtravel, and is available with pull weight as light as 3.5 lbs. Redesigned sear geometry and advanced metallurgy result in a precision-ground sear edge that delivers a precise, consistent letoff and prevents the kind of wear that causes doubling and other problems. Extremely short reset enables fast follow-up shots, a critical advantage on tactical and competition rifles. Machined to exceptionally tight tolerances from hardened steel, and installs in minutes with no permanent alterations to the rifle. Lets you upgrade an AR-15 or an AR-style .308 rifle that uses an AR-15 trigger, while keeping your current hammer and pins. Disconnector spring, engagement screw, and overtravel screw are already installed; also includes disconnector, trigger return spring, hammer spring, and .050" hex key. Use with J.P. Enterprises Speed Hammer (available separately) for best performance. Comes with a standard weight hammer spring, for a trigger pull of between 3 and 3.5 lbs.—perfect for competition and recreational shooting—plus a “tactical” spring that gives a 3.5 to 4 lb. for applications demanding a high level of ignition reliability, including police/military use, mil-spec ammunition with hard primers, and in AR-style .308 rifles. JPFC-1 fits rifles with standard .154" diameter trigger/hammer pin holes.

SPECS: Steel, Parkerized finish. Models for rifles with either .154" (military and current aftermarket) or .169" (current Colt) diameter trigger pins. Measure your pins and select the correct kit. Includes complete instructions and a CD-ROM with 35-minute video showing step-by-step installation.

Newsletter