Votre panier est vide.

Panier

0917309915

METALFORM
1911 MAGAZINE BUMPER PAD

620000011

Provides Protection From Falls On The Ground

Rubber pad provides protection from falls on hard surfaces and gives additional finger rest area. Precision formed to fit all Metalform magazines, bumper attaches with two screws that secure the pad to the bottom of the magazine using pre-existing holes. No modifications to the magazine required. This pad is compatible with welded base magazines only.

SPECS: Rubber, black. 505" c-to-c mounting holes with sheet metal screws supplied. Fits all Metalform 1911 Auto Magazines.

Plus...

Offre une Protection contre les chutes sur le terrain

Coussinet en caoutchouc offre une protection contre les chutes sur les surfaces dures et donne l'aire de repos de doigt supplémentaire. Précision formé pour s'adapter à tous les magazines Metalform, pare-chocs se fixe avec deux vis qui fixent le pad vers le bas de la revue en utilisant les trous existants. Aucune modification au magazine requis. Ce coussin est compatible avec soudés magazines de base seulement.

SPECS : caoutchouc, noir. 505" c-à-c trous de montage avec vis à tôle fournies. S'adapte à tous les Magazines Auto de Metalform 1911.

Plus...

Évaluations client de METALFORM MAGAZINE BUMPER PAD W/SCREWS

Nombre d'évaluations: 18
De brownells.com: 18
Note moyenne: 2.9

Junk! (19.08.2009)

This item is pure junk. When you tighten the screws, they pull right through the soft rubber and out the other side of the pad, which then falls off into your hand. I cannot believe that Metalform actually offers these for sale. I couldn't get the site to accept Zero stars for this item, so I gave it a (1) just to get the warning out.

Fits Checkmate 38 Super Mags (06.05.2010)

After ordering the Checkmate 10 round mags for my Taurus 38 Super +P which fit and work perfectly, I thought I would try these bumper pads even though they say they are for Metalform mags.

Fit perfectly. I added a drop of Loctite on the screws to make sure they did not move. Have not had a problem. Pads are nice and tight.

Good product (15.06.2011)

These pads worked fine for me. Make sure you have the correct small phillips-head driver for the screws. Also, I put some adhesive on the base plate before attaching the pad. It made for an extremely solid install.

Plastic! (19.01.2012)

Good value for plastic.

Rubber is to soft. (31.05.2012)

I ordered two of these bases and found that the screws go right thru the rubber. Not happy. I also ordered the Springfield 9MM mags that have the same base pad. These are going to be used in some rough competition and I don't think they will last. A little harder rubber or a metal insert would have been better.

Good value (02.10.2012)

I have a dozen of these attached to single stack 45 magazines. The provide the needed length to accomodate an S&A Magwell. They do what they are supposed to do -- bumper for bottom of magazine.

I attached mine with the supplied screws and blue loctite. Also used a little epoxy between the basepad and the magazine. Have not had trouble with the screws pulling through or bumpers coming off.

Keep in mind that base pads, like the magazines they ride on, are expendable items. They will wear out if you use them. These work just fine and last better than one might expect.

Bottom line -- they are a good value and do what they are supposed to do. Reasonable care during installation is all that's required.

Now if only Brownells carried the Lime Green metalform bumper...or encouraged them to offer some other colors to help keep different caliber magazines organized.

Great Value (25.04.2013)

Nice, inexpensive bumpers that get the job done. I wish Kimber would automatically put bumpers on their mags, but if you gotta buy an after market product that works, this did a great job.

SCREWS ARE JUNK (28.09.2013)

I am not new to the importance of the right fitting screwdriver. But.... the Bumpers themselves are pretty good but if you can get he self tapper to lock in tighten the Bumper to the Base the screw goes right on through and the Bumper is left in your hand. On my other attempts the screw stars/head strip out before you can get the Bumper seated. These are a bit of a joke actually. I ended up tapping the base plate for a threaded bolt, but only because I had the tools to do so. In all fairness they may have changed their screw offerings in their packaging but there is no way these will tap right in. After the first one failed I even ran a drill and bit in the holes to open & smooth them up a bit but it did not help. The fix - Better screws that fit as they should.

Not worth the money (20.02.2014)

I read the reviews about the screws not tightening up and the screw going right through the pad. I thought, "There is know way, these guys are just over tightening them." I was wrong. The screws will go right through the pads before they ever feel snug. I had ordered some SA magazines a while back at a discounted price and planned on putting these base pads on them. I wished now that I had just spent the extra money and ordered some mags that came with a base pad.

The best pad for hard use. (14.03.2014)

The negative reviews on these are due to improper installation. You simply screw them into a metalform magazine until the head of the screw lightly presses on the rubber, using a hollowground screwdriver so you don't damage the gun screws. Both the base of the magazine as well as the top of the screws are protected against damage even they fall onto concrete due to the use of rubber instead of hard plastic. I prefer this type of basepad over the ones used by other brands that use hard plastic. My two complaints with these are that a lot of dust and dirt sticks to the pad if you drop magazines onto sand or soil, and that the screws can go through the pad if tightened too much, though this hasn't been a problem as I have stopped when the screw starts to press the rubber gently. This is the best pad for dropping onto rock, asphalt or concrete, I have broken floorplates with almost every other type of pad. I have dropped even loaded magazines onto concrete without any damage with these. They also fit all calibers of metalform magazines.

Sorry, Don't Waste Your Time Or Money... (21.01.2015)

The screws supplied with the pad are junk. Both screws snapped in two about half way through securing the rubber pad to the base plate. I read the other reviews and thought I would still give it a try. Don't make my mistake....

Materiel Junk (01.04.2015)

The screws provided for this application are JUNK. Even the tech people are not sure what screw is suppose to be in the packaging. The catalog photos shows a sheet metal screw, but the package comes with a 4-48 self tapping machine screw. I have net even had the opportunity to drive the screw completely into the hole, accomplishing about 3 turns before the threads are completely gone. I am putting them on a Ruger SR1911 with a tapered mag well, using the standard Ruger 7 round welded mag (which the manufacture says is the only mag that is tapped) and have had to re-tap for a larger thread size, since the steel base plates are eating all the threads to the supplied screws. Bottom line, it's about a 50/50 shot that the screws will work. This $3.00 fix will cost you more in time and effort. If your time is worth anything, buy a production mag.

Self Tapping screws aren't complicated (24.11.2015)

after reading through the negative reviews I decided to order the product anyway. inside the package is a simple counterbored rubber basepad, and two self tapping 4-48 screws that have a Philips #1 head. installation is simple using the proper sized screw driver, just use the screw to tap a thread into the mag baseplate in the hole provided. like a tap be sure you break the chip and back the screw out before going all the way through. you could, if you choose tap with a 4-48 tap. do not over tighten the screws as you can pull the threads out. use a good #1 Philips screwdriver or a new #1 driver bit, wera, or whia ext.... and you shouldn't run into any issues.

they are nice rubber basepads, they really are. these will fit any standard mil spec mag, metalform mag, or brownells mag. you will have to drill holes with a #42 drill into mags without pre drilled holes.

Good product, good price (18.01.2016)

After reading other reviews, I went ahead and ordered ten of this item. I found the easiest way to install them was to thread the existing holes in the mag base with a 4-40 tap (not a 4-48) for the screws supplied with my product. Since the rubber bumper is not solid, you do not want to over tighten them, just till you feel some resistance. It may help to look at how far down the screw heads are before installing the first one to get an idea of where they should end up. All in all an easy installation with no problems and a good product.

Poorly designed (11.02.2016)

The screw heads are too small...the pad is not securely attached to the magazine.

Fit Perfectly in Springfield Factory Mag (29.04.2016)

Screws fit perfectly in Springfield Armory factory mags (1911 9mm RO Champion). Holes in base plate were already threaded so no need to tap.

They are self tapping machine screws, not sheet metal screws as the description and picture indicate. This is good as sheet metal screws would not work well. If the holes in the base plates had not already been threaded I would have used a tap to thread them. Not sure the screws would be strong enough to do the job.

My only complaints are the inaccurate description and that Brownells could not answer questions about the screws and was not concerned enough to find out or correct the description.

Bumper pad review (11.05.2017)

Not impressed. Screws should be with a larger head. Overall installation is simple.

Go slow (30.03.2018)

Take your time and go slow when you install these base pads, they will work. Tap the pre-drilled holes using a 4-40 tap ,once tapped when the screw starts to press the rubber gently âSTOPâ. The supplied screws will strip themselves clean if not tapped first even though the description states âNo modifications to the magazine requiredâ, Ask me how I know......

Lire 18 plus d'avis sur brownells.com

9.9 9.9 1 CHF

Référence: 620000011
METALFORM MAGAZINE BUMPER PAD W/SCREWS
Ref Fabricant: BPB Coussinet en caoutchouc offre une protection contre les chutes sur les surfaces dures et donne l'aire de repos de doigt supplémentaire. Précision formé pour s'adapter à tous les magazines Metalform, pare-chocs se fixe avec deux vis qui fixent le pad vers le bas de la revue en utilisant les trous existants. Aucune modification au magazine requis. Ce coussin est compatible avec soudés magazines de base seulement.

9.9 CHF 0 CHF 9.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: 1911 Modèle: Government, Commander, Officers Style: Embase Chargeur

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: 1911 Modèle: Commander,Government,Officers Style: Embase Chargeur Poids du colis: 0.009kg Hauteur d'expédition: 5mm Largeur d'expédition: 53mm Longueur d'expédition: 69mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Provides Protection From Falls On The Ground

SPECS: Rubber, black. 505" c-to-c mounting holes with sheet metal screws supplied. Fits all Metalform 1911 Auto Magazines.

Plus...

Offre une Protection contre les chutes sur le terrain

SPECS : caoutchouc, noir. 505" c-à-c trous de montage avec vis à tôle fournies. S'adapte à tous les Magazines Auto de Metalform 1911.

Plus...

Évaluations client de METALFORM MAGAZINE BUMPER PAD W/SCREWS

Nombre d'évaluations: 18
De brownells.com: 18
Note moyenne: 2.9

Junk! (19.08.2009)

Fits Checkmate 38 Super Mags (06.05.2010)

Good product (15.06.2011)

Plastic! (19.01.2012)

Good value for plastic.

Rubber is to soft. (31.05.2012)

Good value (02.10.2012)

Great Value (25.04.2013)

Nice, inexpensive bumpers that get the job done. I wish Kimber would automatically put bumpers on their mags, but if you gotta buy an after market product that works, this did a great job.

SCREWS ARE JUNK (28.09.2013)

Not worth the money (20.02.2014)

The best pad for hard use. (14.03.2014)

Sorry, Don't Waste Your Time Or Money... (21.01.2015)

Materiel Junk (01.04.2015)

Self Tapping screws aren't complicated (24.11.2015)

Good product, good price (18.01.2016)

Poorly designed (11.02.2016)

The screw heads are too small...the pad is not securely attached to the magazine.

Fit Perfectly in Springfield Factory Mag (29.04.2016)

Bumper pad review (11.05.2017)

Not impressed. Screws should be with a larger head. Overall installation is simple.

Go slow (30.03.2018)

Lire 18 plus d'avis sur brownells.com

Poursuivre vos achats

CHIP MCCORMICK CUSTOM MATCH GRADE, .45 ACP, 8 ROUND, STAINLESS, W/ PAD
1911 8RD 45ACP SHOOTING STAR MATCH GRADE MAGAZINES

CHIP MCCORMICK CUSTOM

Récommandé

CHF 54.90 * CHF 48.90 - CHF 54.90*

Chargeurs

4.3

CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD
1911 8RD 45ACP SHOOTING STAR CLASSIC MAGAZINES

CHIP MCCORMICK CUSTOM

Récommandé

CHF 39.90 *

Chargeurs

4.3

LEE PRECISION LEE UNIVERSAL SHELLHOLDER, #3
UNIVERSAL SHELL HOLDERS

LEE PRECISION

En stock

CHF 12.90 * CHF 12.90 - CHF 59.90*

Supports & Plateaux Support Douilles

LEE PRECISION 454 CASULL CARBIDE 3-DIE SET
PISTOL CARBIDE 3 DIE SETS

LEE PRECISION

En stock

CHF 59.90 * CHF 59.90 - CHF 74.90*

Outils Armes de Poing

BROWNELLS REMINGTON SHOTGUN NON-MARRING NYLON PUNCH TIP
NYLON/BRASS DRIFT PUNCH

BROWNELLS

Récommandé

CHF 15.90 * CHF 9.74 - CHF 42.90*

Chasse Goupille | Oytils Spécials Fusil de Chasse

4.5

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.