Votre panier est vide.

Panier

BROWNELLS
AR-15 PIVOT PIN DETENT INSTALLATION TOOL

050806104594 080216011

Makes installation of the M16 pivot pin and its detent faster and easier. Prevents loss of detents. Guides detent and spring into place and serves as a slave pin when installing the pivot pin.

SPECS: Blued steel. ¼" (6.3mm) diameter. 2½" (6.3cm) and 1½" (3.8cm) long legs .

Plus...

Rend l'installation de l'axe de pivotement de M16 et son cran d'arrêt plus rapide et plus facile. Empêche la perte des détentes. Guide de détente et le ressort en place et sert une épingle esclave lorsque vous installez l'axe de pivotement.

Spécifications : bleui acier. ¼ po (6,3 mm) diamètre. 2½"(6,3 cm) et les longues jambes de 1½ po (3,8 cm).

Plus...

Évaluations client de BROWNELLS PIVOT PIN INSTALLATION TOOL

Nombre d'évaluations: 14
De brownells.com: 14
Note moyenne: 5

Another Must Have (05.11.2009)

Did you know that a pivot pin spring and detent can actually attain Mach 1? Find it necessary to maintain an inventory of these pesky springs and detents because your's keep getting launched into outerspace? Prevent this from happening with this nifty tool. A must-have for your bench

You should definately have one. (17.02.2010)

[@] recommended this simple tool as one of the few tools needed to put a rifle together. It makes the installation of the tiny and slippery pivot pin a snap. If you try to do it by hand without the tool you are going to spend a lot of time struggling and cursing and dropping pieces! I highly recommend it.

A must have (30.12.2010)

I put together my first lower with a parts kit and the very helpul AR-15 videos on Brownells site. I was lucky to have access to this wonderful tool. It made installing the front pivot pin a snap!

Very, very, VERY handy tool! (12.03.2011)

Definitely worth the price of admission if you're building multiple lowers. Take note that if you're only planning to build one lower for yourself, it might be worth the $10 savings to not buy this tool as the pivot pin can be installed without it... but it'll take you three times as long with an equal amount of frustration. One safety tip when installing these detents and springs: wear glasses. They fly hard, and you'll be staring at them when they fly! Also, I cover my head and lower with an old bed blanket to contain the springs and detents when they fly-- and they WILL fly. (If you're not getting it-- this handy tool helps prevent flying parts from going AWOL into your eyeball or under the shop bench!)

The ONLY Pivot Pin Tool you should buy (22.03.2011)

I have a different make pivot pin detent tool and it does work, but not always on the 1st try. This one works like a charm on the 1st try each and every time. Yet another tool, that you can't live without if you build an AR. Buy one and never look back!

Must Have Tool For AR-15 Builders!!!! (07.11.2011)

I ordered this Pivot Pin Dentent Installation Tool specifically for review for my fellow AR-15 builders and enthusiasts. I used this tool yesterday to install two sets of pivot pins on two of my personal AR-15's and I can say this.....What an idiot I was to not have already owned one! This tool works perfectly and everytime!

Anyone who has ever built and AR-15 will tell you that installing the front pivot pin without this tool is a pain in the neck. I have personally lost several detents and springs trying to use makeshift tools to depress the detent itself. This tool is very simple in design and my hat goes of to Brownells for yet another "MUST HAVE" AR-15 tool!

The tool has a nice smooth finish which helps with inserting and removing it from the pivot pin holes in your lower receiver. It is very well made and it shows.

All you have to do is slide it in, align the holes, drop in the spring and detent, turn the tool (which depresses the detent and spring) and push your pivot pin in as you pull the tool out! That's it! Very simple and save you tons of frustration and prevents loosing small parts! I would recommend everyone interested in building an AR-15!!! Thanks Brownells!!!

Handy Tool (18.02.2012)

I haven't gotten a chance to use the tool as of yet but it looks to be sturdy construction and that it will do the job intended.

Absolute Must! (23.03.2012)

Purchased after losing one detent pin.

Had the next pin installed in less than one minute. Absolutely genius piece of gear. I highly recommend this for anyone putting an AR together.

Try the cheap way (13.04.2012)

Actually I dont have one,But they do work Great.
If you need something now,Most folks have a allen wrench that will fit through the pivot holes in there lower,Im sure you know the rest.

Awesome Tool (25.09.2012)

I read the reviews on this tool and thought I would try it without buying this. Then...something told me to get it anyways. Well I have to say it took about 30 seconds to get the pin in and poof...it was complete. At first I thought there had to be more to it. If you are building your lower, "You Cant Do Without This!"

Buy it!!!

Great tool (04.11.2012)

Greatly reduced the likelihood of me shooting my detent pin and spring across my workshop. Definitely pleased with the purchase.

Absolute must have for AR building (16.03.2013)

This is a must-have for anyone planning on building an AR. I can't even imagine installing a pivot pin without one of these now. This thing turns a frustrating process into an afterthought. I use it on every single build and it's saved me much frustration. If you've ever shot a detent or spring out during pivot pin installation, you know what I'm talking about. It's simple, durable, get's the job done easily, and is affordable. Stop mucking around and buy it. You'll be happy you did.

Must have tool! (02.08.2013)

Simple and very effective

Works like a charm (05.08.2016)

Single purpose tool, only good for one thing - but, like most tools, when you need it, you need it.

Lire 14 plus d'avis sur brownells.com

24.9 24.9 1 CHF

Référence: 080216011
BROWNELLS PIVOT PIN INSTALLATION TOOL 050806104594 Rend l'installation de l'axe de pivotement de M16 et son cran d'arrêt plus rapide et plus facile. Empêche la perte des détentes. Guide de détente et le ressort en place et sert une épingle esclave lorsque vous installez l'axe de pivotement.

24.9 CHF 211 CHF 24.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.032kg Hauteur d'expédition: 13mm Largeur d'expédition: 69mm Longueur d'expédition: 147mm

Détails de l'article

Fabriqué au USA

Makes installation of the M16 pivot pin and its detent faster and easier. Prevents loss of detents. Guides detent and spring into place and serves as a slave pin when installing the pivot pin.

SPECS: Blued steel. ¼" (6.3mm) diameter. 2½" (6.3cm) and 1½" (3.8cm) long legs .

Plus...

Spécifications : bleui acier. ¼ po (6,3 mm) diamètre. 2½"(6,3 cm) et les longues jambes de 1½ po (3,8 cm).

Plus...

Évaluations client de BROWNELLS PIVOT PIN INSTALLATION TOOL

Nombre d'évaluations: 14
De brownells.com: 14
Note moyenne: 5

Another Must Have (05.11.2009)

You should definately have one. (17.02.2010)

A must have (30.12.2010)

I put together my first lower with a parts kit and the very helpul AR-15 videos on Brownells site. I was lucky to have access to this wonderful tool. It made installing the front pivot pin a snap!

Very, very, VERY handy tool! (12.03.2011)

The ONLY Pivot Pin Tool you should buy (22.03.2011)

Must Have Tool For AR-15 Builders!!!! (07.11.2011)

Handy Tool (18.02.2012)

I haven't gotten a chance to use the tool as of yet but it looks to be sturdy construction and that it will do the job intended.

Absolute Must! (23.03.2012)

Purchased after losing one detent pin.

Had the next pin installed in less than one minute. Absolutely genius piece of gear. I highly recommend this for anyone putting an AR together.

Try the cheap way (13.04.2012)

Actually I dont have one,But they do work Great.
If you need something now,Most folks have a allen wrench that will fit through the pivot holes in there lower,Im sure you know the rest.

Awesome Tool (25.09.2012)

Great tool (04.11.2012)

Greatly reduced the likelihood of me shooting my detent pin and spring across my workshop. Definitely pleased with the purchase.

Absolute must have for AR building (16.03.2013)

Must have tool! (02.08.2013)

Simple and very effective

Works like a charm (05.08.2016)

Single purpose tool, only good for one thing - but, like most tools, when you need it, you need it.

Lire 14 plus d'avis sur brownells.com

Poursuivre vos achats

BROWNELLS AR-15 ARMORER'S WRENCH
AR-15 ARMORER'S WRENCH

BROWNELLS

En stock

CHF 64.90 *

Clés

3.6

BRAVO COMPANY MCMR HANDGUARD 10" M-LOK FREE FLOAT BLACK
AR-15 BCMGUNFIGHTER MCMR HANDGUARD M-LOK FREE FLOAT

BRAVO COMPANY

En stock

CHF 259.90 * CHF 249.90 - CHF 284.90*

BROWNELLS AR-15/M16 ACTION BLOCK & LOWER VISE BLOCK SET
AR-15/M16 LOWER RECEIVER VISE BLOCK

BROWNELLS

En stock

CHF 69.90 * CHF 29.90 - CHF 69.90*

Etablis & Etaux

3.6

STARRETT #565D 5/32" PIN PUNCH
#565 PIN PUNCH SET

STARRETT

En stock

CHF 21.90 * CHF 19.90 - CHF 134.90*

Chasse Goupille

4.4

CMMG AR-15 GUNBUILDER'S LOWER PARTS KIT
AR-15 LOWER GUNBUILDER'S LOWER PARTS KIT

CMMG

En stock

CHF 64.90 *

4.5

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.