Retains Reverse Plug & Spring On Guide Rod During Field Stripping
Handy steel clip slips over a full-length guide rod and securely retains the reverse plug and spring when field stripping a 1911. Acts like a “third hand” to keep the spring and plug on the rod while you remove or install the slide. Eliminates the need for improvised tools like small nails or paper clips that can fall out and cause a safety hazard by unexpectedly launching the spring, plug, or rod across the shop.
SPECS: Steel, approx. 21⁄8" (5.4cm) long.
Plus...
Conserve inverse Plug & ressort sur la tige de guidage au cours de la champ de décapage
Clip acier maniable se glisse sur une tige de guidage pleine longueur et conserve solidement l'inverse Branchez et printemps quand champ décapage un 1911. Agit comme un « troisième main » pour garder le ressort et brancher sur la tige pendant que vous retirez ou installez la lame. Élimine le besoin d'outils improvisés comme de petits clous ou des trombones qui peut tomber et provoquer un danger pour la sécurité en lançant inopinément le printemps, la fiche ou la tige dans l'ensemble de la boutique.
Spécifications : acier, environ 21 ⁄ long. 8"(5,4 cm)
Plus...
Évaluations client de COMPETITIVE EDGE DYNAMICS REVERSE PLUG RETENTION CLIP
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Works well, though I have so many small hex wenches and small diameter wire accumulated on my bench over the past 32 years. Bought this out of interest alone and it is well designed and seems strong so I can't say anything negative for a simple tool.
Reverse Plug Retention Clip - Review(21.07.2016)
I bought this because cleaning my Wilson Combat Officer's model 1911 with a Reverse slide plug was a pain - the 'homemade pin' kept falling out. This part is a good concept, but required modification to work. 1st: the 'short' clip was still too long for an Officer's model I cut it and then re bent the end to work. 2nd: the original 'bend' length was way too short to function - at all. 3rd. The 'circle' diameter was too large for the slide rod. I bent it to a closer match. Once these 'mods' were done, the clip works well. It might work better on a Commander or full size 1911; but I strongly suspect the 'pin end' will need to be re bent for a longer length.
Référence: 100004616 COMPETITIVE EDGE DYNAMICS REVERSE PLUG RETENTION CLIP Ref Fabricant: 300033 Clip acier maniable se glisse sur une tige de guidage pleine longueur et conserve solidement l'inverse Branchez et printemps quand champ décapage un 1911. Agit comme un « troisième main » pour garder le ressort et brancher sur la tige pendant que vous retirez ou installez la lame. Élimine le besoin d'outils improvisés comme de petits clous ou des trombones qui peut tomber et provoquer un danger pour la sécurité en lançant inopinément le printemps, la fiche ou la tige dans l'ensemble de la boutique.
16.9CHF0CHF 16.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Retains Reverse Plug & Spring On Guide Rod During Field Stripping
Handy steel clip slips over a full-length guide rod and securely retains the reverse plug and spring when field stripping a 1911. Acts like a “third hand” to keep the spring and plug on the rod while you remove or install the slide. Eliminates the need for improvised tools like small nails or paper clips that can fall out and cause a safety hazard by unexpectedly launching the spring, plug, or rod across the shop.
SPECS: Steel, approx. 21⁄8" (5.4cm) long.
Plus...
Conserve inverse Plug & ressort sur la tige de guidage au cours de la champ de décapage
Clip acier maniable se glisse sur une tige de guidage pleine longueur et conserve solidement l'inverse Branchez et printemps quand champ décapage un 1911. Agit comme un « troisième main » pour garder le ressort et brancher sur la tige pendant que vous retirez ou installez la lame. Élimine le besoin d'outils improvisés comme de petits clous ou des trombones qui peut tomber et provoquer un danger pour la sécurité en lançant inopinément le printemps, la fiche ou la tige dans l'ensemble de la boutique.
Spécifications : acier, environ 21 ⁄ long. 8"(5,4 cm)
Plus...
Évaluations client de COMPETITIVE EDGE DYNAMICS REVERSE PLUG RETENTION CLIP
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Works well, though I have so many small hex wenches and small diameter wire accumulated on my bench over the past 32 years. Bought this out of interest alone and it is well designed and seems strong so I can't say anything negative for a simple tool.
Reverse Plug Retention Clip - Review(21.07.2016)
I bought this because cleaning my Wilson Combat Officer's model 1911 with a Reverse slide plug was a pain - the 'homemade pin' kept falling out. This part is a good concept, but required modification to work. 1st: the 'short' clip was still too long for an Officer's model I cut it and then re bent the end to work. 2nd: the original 'bend' length was way too short to function - at all. 3rd. The 'circle' diameter was too large for the slide rod. I bent it to a closer match. Once these 'mods' were done, the clip works well. It might work better on a Commander or full size 1911; but I strongly suspect the 'pin end' will need to be re bent for a longer length.