Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
080800902
Extra Surface Area Gives Tremendous Power To Clamp Hold & Even The Tightest Barrel
To compliment our "Ring-Of-Steel" Action Wrench System, we've developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for increased durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive, four cap screw system and the extra-wide design generates so much holding force, Brownells Barrel Vise must be firmly bolted to the stoutest bench or immovable base to fully realize its greatest potential. Aluminum, split barrel bushings come in eight different hole sizes and one, special, pre-machined bushing to make this universal Barrel Vise system the very first choice of professional gunsmit hs. Steel Bushings provide years of service, plus have the necessary clamping power to break loose the tightest barrels. Aluminium Bushings give exceptional holding ability without marking your barrel. Allen Head Bolt Kit - ½"-20 tpi x 2" long. Used to hold Top and Bottom Blocks together. Kit includes four bolts and the correct, 3⁄8" Allen wrench for these bolts.

SPECS: Blocks - Steel, blued. Top Block; 4½" (11.4cm) x 3" (7.6cm) x 1½" (3.8cm). Bottom Block; 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish. 6160 aluminum, natural finish. #4, 7, 8, 9, 10 and 11 are in a range of I.D.'s to closely match the shank diameters of most rifle barrels. #5 Bushing; fits military Mauser 98 barrels. #6 Bushing tapered to fit Remington Factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy barrels on M1A/M14's and M1 Garand's. All bushings 3" long, 1¾" diameter. Barrel Vise Set comes complete with seven bushings (#5, 12 & 13 NOT included).

16.9 16.9 1 CHF
Référence: 080800902
BROWNELLS BARREL VISE ALLEN HEAD BOLT KIT Pour compléter notre système de clé à Action « Ring Of Steel », nous avons développé l'étau de baril de qualité uniquement professionnelle qui sera positivement fixer et maintenir encore le Canon plus serré de tourner au moment du retrait. Usinés en acier solide pour une durabilité accrue répondre aux besoins de montage et démontage de baril de n'importe quel armurier pendant des années. Notre exclusif, système de quatre vis à tête cylindrique et le design extra large génère tellement force de retenue, Brownells baril étau doivent être solidement boulonnée sur le banc plu ou immeuble base de réaliser pleinement son potentiel plus grand. Aluminium, bagues de baril de split viennent dans huit tailles différentes de trou et l'autre, spécial, pré usinés douille pour rendre ce système universel de baril étau le très premier choix des professionnels gunsmit hs. Bagues en acier des années de service, plusent ont la force de blocage nécessaire afin de détacher les barils plus serrés. Bagues en aluminium permettent de tenue exceptionnelle sans marquage de votre Canon. Kit de boulon Allen Head - tpi ½"-20 x 2" de long. Utilisé pour tenir le haut et le bas blocs ensemble. Le kit comprend quatre boulons et le correct, 3⁄8 po "clé Allen pour ces boulons.
16.9 CHF 0 CHF 16.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.295kg Hauteur d'expédition: 25mm Largeur d'expédition: 81mm Longueur d'expédition: 137mm




Extra Surface Area Gives Tremendous Power To Clamp Hold & Even The Tightest Barrel
To compliment our "Ring-Of-Steel" Action Wrench System, we've developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for increased durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive, four cap screw system and the extra-wide design generates so much holding force, Brownells Barrel Vise must be firmly bolted to the stoutest bench or immovable base to fully realize its greatest potential. Aluminum, split barrel bushings come in eight different hole sizes and one, special, pre-machined bushing to make this universal Barrel Vise system the very first choice of professional gunsmit hs. Steel Bushings provide years of service, plus have the necessary clamping power to break loose the tightest barrels. Aluminium Bushings give exceptional holding ability without marking your barrel. Allen Head Bolt Kit - ½"-20 tpi x 2" long. Used to hold Top and Bottom Blocks together. Kit includes four bolts and the correct, 3⁄8" Allen wrench for these bolts.

SPECS: Blocks - Steel, blued. Top Block; 4½" (11.4cm) x 3" (7.6cm) x 1½" (3.8cm). Bottom Block; 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish. 6160 aluminum, natural finish. #4, 7, 8, 9, 10 and 11 are in a range of I.D.'s to closely match the shank diameters of most rifle barrels. #5 Bushing; fits military Mauser 98 barrels. #6 Bushing tapered to fit Remington Factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy barrels on M1A/M14's and M1 Garand's. All bushings 3" long, 1¾" diameter. Barrel Vise Set comes complete with seven bushings (#5, 12 & 13 NOT included).

Newsletter