Originally designed for metal workers and mechanics to remove stuck bolts, these heavy-duty extractors bite into the metal for extra traction so you can apply the force needed to remove a choke that refuses to budge with ordinary tools. Available for 12 and 20 gauge. Complete instructions included. Caution: muzzle damage can result if used incorrectly.
SPECS: Tool steel, black oxide finish. 12 Gauge – 4 7⁄8" length, gripping surface tapers from 9⁄16" to 2 7⁄32". 20 Gauge – 4½" length, gripping surface tapers from ½" to 9⁄16".
Plus...
Outil no-nonsense supprime les selfs congelés
Initialement conçu pour les travailleurs de la métallurgie et la mécanique enlever les boulons coincés, ces extracteurs lourds mordent dans le métal pour la traction supplémentaire, donc vous pouvez demander la force nécessaire pour enlever un Starter qui refuse de bouger avec des outils courants. Disponible pour le calibre 12 et 20. Instructions complètes incluses. ATTENTION : museau peut endommager si utilisé à mauvais escient.
Spécifications : acier à outils, noir oxyde finition. 12 jauge – 4 7 ⁄ 8" longueur, préhension surfaces cônes de 9 ⁄ 16" à 2 7 ⁄ 32". calibre 20 – 4½" longueur, saisissant des cônes surfaces de ½" à 9 ⁄ 16".
Plus...
Évaluations client de BROWNELLS 20 GAUGE STUCK CHOKE REMOVAL TOOL
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 2.5
Worked well(02.04.2014)
I had an inventor DS choke tube stuck in an A5 thats about a year old. Tried everything to get the choke out to the point where wrenches wore the notches on the tube.
I bought this tool as a hail mary before relenting and going to a gunsmith. It took a couple tries and tapping the tool in harder, but with a crescent wrench and a couple sharp raps with a hammer to the tool was finally able to get the tube out. No damage to barrel, choke was not any more messed than before, junking it though.
You might have drive the tool in a little harder than you think.
Good price shipping was good, fedex is always good.
Didn't work(12.08.2014)
I tried to remove a stuck choke tube from a Bennelli shotgun with no luck at all. I had previously talked with a Brownell's consultant and was told to follow the written instructions that came with the tool. I did that to the letter. The cutting edges of the tool were softer than the choke tube metal and merely broke away as I tried to twist the tool.
I finally had to try another method of removal which I found on Youtube. I used JB Weld to glue in a deep well socket that was about 1/8 of an inch smaller in diameter than the choke tube. After letting it set up for 24 hours I used a ratchet to remove the socket which bonded to the choke tube.
I would return the tool to Brownells except that postage would cost as much as the tool.
Référence: 587036967 BROWNELLS 20 GAUGE STUCK CHOKE REMOVAL TOOL Ref Fabricant: 36967 Initialement conçu pour les travailleurs de la métallurgie et la mécanique enlever les boulons coincés, ces extracteurs lourds mordent dans le métal pour la traction supplémentaire, donc vous pouvez demander la force nécessaire pour enlever un Starter qui refuse de bouger avec des outils courants. Disponible pour le calibre 12 et 20. Instructions complètes incluses. ATTENTION : museau peut endommager si utilisé à mauvais escient.
21.9CHF0CHF 21.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Poids du colis: 0.045kgHauteur d'expédition: 10mmLargeur d'expédition: 79mmLongueur d'expédition: 155mm
Détails de l'article
Fabriqué au USA
Référence: 587036968 BROWNELLS 12 GAUGE STUCK CHOKE REMOVAL TOOL Ref Fabricant: 36968 Initialement conçu pour les travailleurs de la métallurgie et la mécanique enlever les boulons coincés, ces extracteurs lourds mordent dans le métal pour la traction supplémentaire, donc vous pouvez demander la force nécessaire pour enlever un Starter qui refuse de bouger avec des outils courants. Disponible pour le calibre 12 et 20. Instructions complètes incluses. ATTENTION : museau peut endommager si utilisé à mauvais escient.
25.9CHF16CHF 25.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Originally designed for metal workers and mechanics to remove stuck bolts, these heavy-duty extractors bite into the metal for extra traction so you can apply the force needed to remove a choke that refuses to budge with ordinary tools. Available for 12 and 20 gauge. Complete instructions included. Caution: muzzle damage can result if used incorrectly.
SPECS: Tool steel, black oxide finish. 12 Gauge – 4 7⁄8" length, gripping surface tapers from 9⁄16" to 2 7⁄32". 20 Gauge – 4½" length, gripping surface tapers from ½" to 9⁄16".
Plus...
Outil no-nonsense supprime les selfs congelés
Initialement conçu pour les travailleurs de la métallurgie et la mécanique enlever les boulons coincés, ces extracteurs lourds mordent dans le métal pour la traction supplémentaire, donc vous pouvez demander la force nécessaire pour enlever un Starter qui refuse de bouger avec des outils courants. Disponible pour le calibre 12 et 20. Instructions complètes incluses. ATTENTION : museau peut endommager si utilisé à mauvais escient.
Spécifications : acier à outils, noir oxyde finition. 12 jauge – 4 7 ⁄ 8" longueur, préhension surfaces cônes de 9 ⁄ 16" à 2 7 ⁄ 32". calibre 20 – 4½" longueur, saisissant des cônes surfaces de ½" à 9 ⁄ 16".
Plus...
Évaluations client de BROWNELLS 20 GAUGE STUCK CHOKE REMOVAL TOOL
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 2.5
Worked well(02.04.2014)
I had an inventor DS choke tube stuck in an A5 thats about a year old. Tried everything to get the choke out to the point where wrenches wore the notches on the tube.
I bought this tool as a hail mary before relenting and going to a gunsmith. It took a couple tries and tapping the tool in harder, but with a crescent wrench and a couple sharp raps with a hammer to the tool was finally able to get the tube out. No damage to barrel, choke was not any more messed than before, junking it though.
You might have drive the tool in a little harder than you think.
Good price shipping was good, fedex is always good.
Didn't work(12.08.2014)
I tried to remove a stuck choke tube from a Bennelli shotgun with no luck at all. I had previously talked with a Brownell's consultant and was told to follow the written instructions that came with the tool. I did that to the letter. The cutting edges of the tool were softer than the choke tube metal and merely broke away as I tried to twist the tool.
I finally had to try another method of removal which I found on Youtube. I used JB Weld to glue in a deep well socket that was about 1/8 of an inch smaller in diameter than the choke tube. After letting it set up for 24 hours I used a ratchet to remove the socket which bonded to the choke tube.
I would return the tool to Brownells except that postage would cost as much as the tool.