The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Plus...
La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
Plus...
Évaluations client de LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 5
Works well at about half the price(11.04.2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!
Référence: 100053275 LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM Ref Fabricant: 90782734307907822 La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
21.9CHF5CHF 21.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Calibre: 10 mm Auto, 40 S&WType d'Outil: Outils Taper Crimp
Calibre:
40 S&W,10 mm Auto
Type d'Outil:
Outils Taper Crimp
Poids du colis: 0.129kgHauteur d'expédition: 38mmLargeur d'expédition: 38mmLongueur d'expédition: 121mm
Détails de l'article
Fabriqué au USA
Référence: 100053276 LEE PRECISION LEE TAPER CRIMP DIE, 44 SPECIAL Ref Fabricant: 90784734307907846 La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
19.9CHF1CHF 19.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100053279 LEE PRECISION LEE TAPER CRIMP DIE, 9MM Ref Fabricant: 90780734307907808 La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
19.9CHF9CHF 19.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Calibre: 9 mm LugerType d'Outil: Outils Taper Crimp
Référence: 100053277 LEE PRECISION LEE TAPER CRIMP DIE, 45 COLT Ref Fabricant: 90786734307907860 La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
19.9CHF1CHF 19.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100053278 LEE PRECISION LEE TAPER CRIMP DIE, 45 ACP Ref Fabricant: 90785734307907853 La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
21.9CHF4CHF 21.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Calibre: 45 Auto (ACP)Type d'Outil: Outils Taper Crimp
Référence: 100053274 LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL Ref Fabricant: 90781734307907815 La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
21.9CHF0CHF 21.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Plus...
La matrice de sertissage conique Lee est en acier trempé conçu pour surmonter les problèmes de sertissage causées par la conception de mourir pauvre. Balles chemisés doivent avoir une rainure de sertissage.
Plus...
Évaluations client de LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 5
Works well at about half the price(11.04.2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!