Protects Critical Locking Lugs When Welding Or Forging Bolt Handles
Provides protection to locking lugs when welding or forging bolt handles by pulling heat away from these critical areas and dissipating it. Especially effective when used with Heat Control Paste. Threaded to fit securely into rear of bolt body, giving additional protection to interior threads by preventing scale formation. Flats milled on end allow use of wrench. Available separately or as a Set of five.
SPECS: Steel, blued. 4¼" (10.8cm) to 5½" (14cm) long depending on the model. #1 - 1903 & 03A3 Springfields, #3 - 98 Mauser, #4 - Remington 700.
Plus...
Protège des cosses blocage critiques lorsque soudage ou forger Bolt poignées
Offre une protection aux attaches de verrouillage lorsque soudage ou forgeage boulon poignées en tirant chaleur loin de ces zones critiques et se dissiper il. Particulièrement efficace lorsqu'il est utilisé avec la pâte de contrôle de chaleur. Fileté pour s'adapter en toute sécurité dans la partie arrière du corps de boulon, ce qui donne une protection supplémentaire aux filetages intérieurs en empêchant la formation de tartre. Appartements blanchis sur fin permettent l'utilisation de la clé. Disponibles séparément ou comme un ensemble de cinq.
Spécifications : acier, bleui. 4¼"(10,8 cm) à 5½" (14 cm) de longueur selon le modèle. #1 - 1903 & 03A3 Springfields, #3 - Mauser 98, #4 - Remington 700, n° 5 - Winchester M70.
Plus...
Évaluations client de BROWNELLS #1 BOLT HEAT SINK
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Great Product!(19.09.2015)
Purchased this to silver solder a bolt handle back onto a Remington 600 Mohawk bolt body. Since made for a Rem 700, it was too long. You can either cut off 1/2" of material or turn down
last 1/2" of dowel to under .200" to fit properly. The threads are the same. Worked perfectly according to supplied instructions. Use heat paste!!!
The Obvious Industry Standard(06.09.2009)
I used to use a slightly less expensive heatsink product from another company. After having a scary moment when the wrench head ripped off while removing it from a Yugo 48 bolt I decided to go with this one.
I don't know how else to say it: the quality of the aluminum in this heatsink is much better. While both heatsinks are the same size the Brownell's version is much heavier. The fit and finish are also drastically better.
I do (gasp!) Oxy-Acetylene welding, and in conjunction with heat-stop paste I have never even approached a warm touch on the lugs of a Yugo 48, Turk, or Vz-24 bolt using this heatsink.
You can go with the copy or go with the original. I should have went with the Brownells's heatsink in the first place.
Référence: 080638001 BROWNELLS #1 BOLT HEAT SINK050806102866 Offre une protection aux attaches de verrouillage lorsque soudage ou forgeage boulon poignées en tirant chaleur loin de ces zones critiques et se dissiper il. Particulièrement efficace lorsqu'il est utilisé avec la pâte de contrôle de chaleur. Fileté pour s'adapter en toute sécurité dans la partie arrière du corps de boulon, ce qui donne une protection supplémentaire aux filetages intérieurs en empêchant la formation de tartre. Appartements blanchis sur fin permettent l'utilisation de la clé. Disponibles séparément ou comme un ensemble de cinq.
28.9CHF2CHF 28.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Manufacture: SpringfieldModèle: Model 1903, 03-A3
Manufacture:
Springfield
Modèle:
03-A3,Model 1903
Poids du colis: 0.181kgHauteur d'expédition: 18mmLargeur d'expédition: 76mmLongueur d'expédition: 178mm
Détails de l'article
Fabriqué au USA
Référence: 080638004 BROWNELLS #4 BOLT HEAT SINK Offre une protection aux attaches de verrouillage lorsque soudage ou forgeage boulon poignées en tirant chaleur loin de ces zones critiques et se dissiper il. Particulièrement efficace lorsqu'il est utilisé avec la pâte de contrôle de chaleur. Fileté pour s'adapter en toute sécurité dans la partie arrière du corps de boulon, ce qui donne une protection supplémentaire aux filetages intérieurs en empêchant la formation de tartre. Appartements blanchis sur fin permettent l'utilisation de la clé. Disponibles séparément ou comme un ensemble de cinq.
27.9CHF0CHF 27.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Protects Critical Locking Lugs When Welding Or Forging Bolt Handles
Provides protection to locking lugs when welding or forging bolt handles by pulling heat away from these critical areas and dissipating it. Especially effective when used with Heat Control Paste. Threaded to fit securely into rear of bolt body, giving additional protection to interior threads by preventing scale formation. Flats milled on end allow use of wrench. Available separately or as a Set of five.
SPECS: Steel, blued. 4¼" (10.8cm) to 5½" (14cm) long depending on the model. #1 - 1903 & 03A3 Springfields, #3 - 98 Mauser, #4 - Remington 700.
Plus...
Protège des cosses blocage critiques lorsque soudage ou forger Bolt poignées
Offre une protection aux attaches de verrouillage lorsque soudage ou forgeage boulon poignées en tirant chaleur loin de ces zones critiques et se dissiper il. Particulièrement efficace lorsqu'il est utilisé avec la pâte de contrôle de chaleur. Fileté pour s'adapter en toute sécurité dans la partie arrière du corps de boulon, ce qui donne une protection supplémentaire aux filetages intérieurs en empêchant la formation de tartre. Appartements blanchis sur fin permettent l'utilisation de la clé. Disponibles séparément ou comme un ensemble de cinq.
Spécifications : acier, bleui. 4¼"(10,8 cm) à 5½" (14 cm) de longueur selon le modèle. #1 - 1903 & 03A3 Springfields, #3 - Mauser 98, #4 - Remington 700, n° 5 - Winchester M70.
Plus...
Évaluations client de BROWNELLS #1 BOLT HEAT SINK
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Great Product!(19.09.2015)
Purchased this to silver solder a bolt handle back onto a Remington 600 Mohawk bolt body. Since made for a Rem 700, it was too long. You can either cut off 1/2" of material or turn down
last 1/2" of dowel to under .200" to fit properly. The threads are the same. Worked perfectly according to supplied instructions. Use heat paste!!!
The Obvious Industry Standard(06.09.2009)
I used to use a slightly less expensive heatsink product from another company. After having a scary moment when the wrench head ripped off while removing it from a Yugo 48 bolt I decided to go with this one.
I don't know how else to say it: the quality of the aluminum in this heatsink is much better. While both heatsinks are the same size the Brownell's version is much heavier. The fit and finish are also drastically better.
I do (gasp!) Oxy-Acetylene welding, and in conjunction with heat-stop paste I have never even approached a warm touch on the lugs of a Yugo 48, Turk, or Vz-24 bolt using this heatsink.
You can go with the copy or go with the original. I should have went with the Brownells's heatsink in the first place.